32 results
·
42ms
·
Sources: EU EUDAMED, US FDA
Filters
Status: Terminated
×
Tibial Tray, component of Ortho Development Balanced Knee System, Nonporous, Sterile R, Size 3, REF 162-1300, Ortho Development, Draper, Utah 84020. The Balanced Knee System is indicated in the salvage of previously failed surgical attempts where femoral bone loss does not require the use of augments or stem extensions and where collateral ligaments may be relied upon for medial/lateral stability.
FDA Recall
Terminated
·Ortho Development Corporation·Product code JWH·May 29, 2009
Encompass Hip Stem, Plasma Spray, 12/14 Taper, Standard, REF 108-XXXX, Sterile R, Ortho Development, Draper, Utah 84020. Intended for use in total hip arthroscopy. Device fixation is achieved by an optimal, press-fit in the medullary canal, which maximizes contact between the stem and the bone.
FDA Recall
Terminated
·Ortho Development Corporation·Product code MBL·May 10, 2011
Encompass Hip Stem, Plasma Spray, 12/14 Taper, Extended, REF 109-XXXX, Sterile R, Ortho Development, Draper, Utah 84020. Intended for use in total hip arthroscopy. Device fixation is achieved by an optimal, press-fit in the medullary canal, which maximizes contact between the stem and the bone.
FDA Recall
Terminated
·Ortho Development Corporation·Product code MBL·May 10, 2011
Ovation Hip Stem, REF 201-0102, Offset Stem Inserter RT, Non-Sterile, Ortho Development, Draper, Utah 84020. The Ovation Hip System is intended for use in total hip arthroplasty. The hip stem inserter is an instrument used to seat the hip stem in the femur. There is a notch in the top of the hip stem, and the hip stem inserter has a corresponding tip at the end of the instrument. The tip of the inserter is designed to fit into the notch of the hip stem, as a guide. Once this is inserted, the surgeon will tap on the opposite end of the inserter with a hammer to seat the press-fitted stem assembly.
FDA Recall
Terminated
·Ortho Development Corporation·Product code LZO·January 11, 2011
Ovation Hip Stem, REF 201-0103, Offset Stem Inserter LT, Non-Sterile, Ortho Development, Draper, Utah 84020. The Ovation Hip System is intended for use in total hip arthroplasty. The hip stem inserter is an instrument used to seat the hip stem in the femur. There is a notch in the top of the hip stem, and the hip stem inserter has a corresponding tip at the end of the instrument. The tip of the inserter is designed to fit into the notch of the hip stem, as a guide. Once this is inserted, the surgeon will tap on the opposite end of the inserter with a hammer to seat the press-fitted stem assembly.
FDA Recall
Terminated
·Ortho Development Corporation·Product code LZO·January 11, 2011
Ovation Hip Stem, REF 201-0104, Offset Stem Inserter Neutral, Non-Sterile, Ortho Development, Draper, Utah 84020. The Ovation Hip System is intended for use in total hip arthroplasty. The hip stem inserter is an instrument used to seat the hip stem in the femur. There is a notch in the top of the hip stem, and the hip stem inserter has a corresponding tip at the end of the instrument. The tip of the inserter is designed to fit into the notch of the hip stem, as a guide. Once this is inserted, the surgeon will tap on the opposite end of the inserter with a hammer to seat the press-fitted stem assembly.
FDA Recall
Terminated
·Ortho Development Corporation·Product code LZO·January 11, 2011
Ovation Hip Stem, REF 201-0002, Hip Stem Inserter, Non-Sterile, Ortho Development, Draper, Utah 84020. The Ovation Hip System is intended for use in total hip arthroplasty. The hip stem inserter is an instrument used to seat the hip stem in the femur. There is a notch in the top of the hip stem, and the hip stem inserter has a corresponding tip at the end of the instrument. The tip of the inserter is designed to fit into the notch of the hip stem, as a guide. Once this is inserted, the surgeon will tap on the opposite end of the inserter with a hammer to seat the press-fitted stem assembly.
FDA Recall
Terminated
·Ortho Development Corporation·Product code LZO·January 11, 2011
5mm Tibial Augment Block, a component of Ortho Balanced Knee Modular Tibial System. The device is a component of Balanced Knee Modular Tibial System and is indicated for patients suffering from severe knee pain and disability. The indications for use are: 1) loss of joint configuration and joint function, 2) Osteoarthritis of the knee joint, 3) Rheumatoid arthritis of the knee joint, 4) Post-traumatic arthritis of the knee joint, 5) Moderate valgus, varus, or flexion deformities and 6) Revision procedures where other treatments or devices have failed.
FDA Recall
Terminated
·Ortho Development Corporation·Product code JWH·March 19, 2009
10 degree Tibial Augment Wedge, a component of Ortho Balanced Knee Modular Tibial System. The device is a component of Balanced Knee Modular Tibial System and is indicated for patients suffering from severe knee pain and disability. The indications for use are: 1) loss of joint configuration and joint function, 2) Osteoarthritis of the knee joint, 3) Rheumatoid arthritis of the knee joint, 4) Post-traumatic arthritis of the knee joint, 5) Moderate valgus, varus, or flexion deformities and 6) Revision procedures where other treatments or devices have failed.
FDA Recall
Terminated
·Ortho Development Corporation·Product code JWH·March 19, 2009
U-Joint Hex Head Driver 3.5mm, Part Number 228-0016, for the Escalade Acetabular Cup System. Driver is included in Part Number 270-9004-Escalade Acetabular Prep Kit and Part Number 228-9001-Triplus Acetabular Instrument Kit. The Acetabular Cup System is indicated for use in total hip arthroplasty procedures where the means of cup fixation is uncemented, biological fixation. The Hex Head Drive is used to place the screw that affixes the acetabular cup to the hip acetabulum.
FDA Recall
Terminated
·Ortho Development Corporation·Product code LZO·December 19, 2011
PS-C Femoral Nonporous Rt Sz 6, Model Number 161-1604 Component of the Balanced Knee System and Balanced Knee Revision System, for total knee arthroplasty procedures.
FDA Enforcement
Class II
·Terminated·Ortho Development Corporation·May 21, 2014
PS Tibial Insert, REF 163-1XXX Product Usage: UHMWPE component used in TKA procedures to serve as a tibial bearing surface for articulation with the femoral component
FDA Enforcement
Class II
·Terminated·Ortho Development Corporation·August 27, 2014
Tibila Insert CK, Balanced Knee System Revision, REF563-1YYY Product Usage: UHMWPE component used in TKA and revision TKA procedures to serve as a tibial bearing surface for articulation with the femoral component where additional joint constraint is needed
FDA Enforcement
Class II
·Terminated·Ortho Development Corporation·August 27, 2014
Pivot Bipolar Cup 22x42/43-51/53mm, REF 133-YYYY Product Usage: Used in a hemiarthroplasty procedure as the bearing surface to articulate with both the CoCr femoral head and the natural acetabulum
FDA Enforcement
Class II
·Terminated·Ortho Development Corporation·August 27, 2014
Tibila Insert UC, Balanced Knee System, REF163-3YYY Product Usage: UHMWPE component used in TKA procedures to serve as a tibial bearing surface for articulation with the femoral component
FDA Enforcement
Class II
·Terminated·Ortho Development Corporation·August 27, 2014
Patella 38mm, REF164-0038 Product Usage: UHMWPE component used in a TKA procedure to resurface the patella and serve as a bearing surface for sliding contact with the femoral component
FDA Enforcement
Class II
·Terminated·Ortho Development Corporation·August 27, 2014
CR Tibial Insert, Size 5, 7mm, REF 163-2507, Sterile R, Ortho Development, Draper, Utah 84020. The tibial insert is a device that fits into the tibial tray during knee revision. It provides the base for the metal femoral portion of the system, and moderates the degree of flexion afforded by the procedure.
FDA Recall
Terminated
·Ortho Development Corporation·Product code JWH·January 7, 2011
UC Tibial Insert, Size 4, 13mm, REF 163-3413, Sterile R, Ortho Development, Draper, Utah 84020. The tibial insert is a device that fits into the tibial tray during knee revision. It provides the base for the metal femoral portion of the system, and moderates the degree of flexion afforded by the procedure.
FDA Recall
Terminated
·Ortho Development Corporation·Product code JWH·January 7, 2011
Distal Centralizer 10 mm
FDA Recall
Terminated
·Ortho Development Corporation·Product code KWY·July 28, 2010
Tibila Insert UC, Balanced Knee System, REF163-3YYY Product Usage: UHMWPE component used in TKA procedures to serve as a tibial bearing surface for articulation with the femoral component
FDA Recall
Terminated
·Ortho Development Corporation·Product code JWH·July 11, 2014