59 results
·
7ms
·
Sources: EU EUDAMED, US FDA
Blood pressure (BP) circuit of the ANSAR ANX-3.0 Autonomic Monitor system. The ANX 3.0 system is comprised of these components. 1. Patient Physiological Monitor, 2. Laptop Computer, 3. Stand w/wheels, 4. Patient cables, 5. Software components (Respiratory and Cardiac Spectral Frequency Signal Processor). The different monitor components that can be used in the system are one of the following per system are as follows: Patient Physiological Monitors used: CJPS Vital Pro, Zoe Medical Nightingale Monitoring system, Ivy Biomedical model 405P, Software components: Ansar ANS C 3000. The device is also referred to as the ANS-C3000.
FDA Enforcement
Class II
·Terminated·Ansar Group, Inc. Dba Ansar Medical Technologies, Inc·August 27, 2014
Ceiling Type X-Ray Tube Support Models CH-200 and CH-200M used with RADspeed, SonialVision and FLUOROspeed Systems The ceiling type x-ray tube support CH-200 is used to hold the X-ray tube and collimator to position the X-ray tube unit. This unit is used for radiographic examinations of whole body except mammography when combined with an X-ray high voltage generator, an X-ray tube unit, an X-ray collimator, and if necessary, an X-ray radiography stand, an X-ray radiography table, and digital radiography system.
FDA Enforcement
Class II
·Ongoing·SHIMADZU CORPORATION MEDICAL SYSTEMS DIVISION·November 19, 2025
Convenience Kits 1. 25GA Convenience Kit - FNX VS0644.25-FNX 2. 25GA Convenience Kit - FXX VS0644.25-FXX 3.25GA Convenience Kit - XES VS0644.25-XES
FDA Enforcement
Class II
·Ongoing·Vortex Surgical Inc.·February 11, 2026
The device is an X-ray system that is capable of radiographic and fluoroscopic studies and is used in an interventional setting. The system consists of a C-arm which is equipped with an X-ray tube, beam limiter and X-ray receptor, X-ray controller, computers with system and processing software, and a patient radiographic table.
FDA Enforcement
Class II
·Ongoing·Canon Medical System, USA, INC.·February 28, 2024
The EOSedge system may acquire two simultaneous orthogonal planar images for a standing or seated patient at low dose. The scan length is defined by the user and may cover the whole body or a specific area (spine, lower limbs, etc.). EOSedge consists of a gantry and an acquisition workstation. ¿ The gantry contains two orthogonal acquisition units, each of which comprises an X-ray source (high frequency generator + X-ray tube + collimator) and an X-ray detection system (detector + electronics). ¿ The acquisition workstation and its software control the generators and detectors. It is also used to enter patient data, via RIS/HIS or manually, to define acquisition parameters, process images and record images in DICOM 3.0 format. The intended use/indications for use, technological characteristics, and principles of operation of the EOSedge system are described below.
FDA Enforcement
Class II
·Terminated·EOS Imaging·April 21, 2021
BNX Fine Need Aspiration System (22GA); Material/Part#: DSN-22-01
FDA Enforcement
Class II
·Terminated·Medtronic·March 22, 2017
BNX Fine Need Aspiration System (19GA); Material/Part #: DSN-19-01
FDA Enforcement
Class II
·Terminated·Medtronic·March 22, 2017
X-Ray Diagnostic Table, Model No. YSF-300 Use in combination with an X-ray high voltage generator, an X-ray tube unit, an Image intensifier and X-ray television unit, this table is applied for the following X-ray examinations: -X-ray T.V. fluoroscopy -Spot-filming -Bucky radiography
FDA Enforcement
Class II
·Terminated·Shimadzu Medical Systems·May 4, 2016
Carestream DRX Evolution System, X-Ray System --- The DRX-Evolution system is a permanently installed diagnostic x-ray system for generation of x-rays for examination of various anatomical regions.
FDA Enforcement
Class II
·Terminated·Carestream Health Inc.·August 21, 2013
Toshiba Infinix X-Ray Interventional System INFX-8000V/UU. An X-Ray system that is capable of radiographic and fluoroscopic studies used in an interventional setting.
FDA Enforcement
Class II
·Terminated·Toshiba American Medical Systems Inc·June 11, 2014
First Source Vision M. Portable cart and platform that supports an X-ray system and laptop computer.
FDA Enforcement
Class II
·Ongoing·First Source Inc·July 10, 2024
Luminos dRF Max- Intended to visualize anatomical structures by converting an x-ray pattern into a visible image. Model Number: 10762471
FDA Enforcement
Class II
·Ongoing·Siemens Medical Solutions USA, Inc·August 14, 2024
LUMINOS Lotus Max -Intended to visualize anatomical structures by converting an x-ray pattern into a visible image Model Number: 11574100
FDA Enforcement
Class II
·Ongoing·Siemens Medical Solutions USA, Inc·August 14, 2024
First Source iQ Flex M. Portable cart and platform that supports an X-ray system and laptop computer.
FDA Enforcement
Class II
·Ongoing·First Source Inc·July 10, 2024
SHIMADZU Ceiling Type X-ray Tube Support CH-200/CH-200M Catalog Number: CH-200/CH-200M Holds an x-ray tube unit and collimator combined with an z-ray high voltage generator, radiographic stand, and table. It is designed to perform radiography of patients either in a standing or supine position
FDA Enforcement
Class II
·Terminated·Shimadzu Medical Systems Usa Com·July 5, 2017
Multitom Rax -Intended to visualize anatomical structures by converting an x-ray pattern into a visible image Model Number: 10860700
FDA Enforcement
Class II
·Ongoing·Siemens Medical Solutions USA, Inc·August 14, 2024
CR MD1.0 General Set, x-ray imager image plate. CR 10-X Image Plate 35CM X 43CM. An image plate, contained in an X-Ray cassette, used to capture images from X-Ray exposures. The cassette with the image plate, once exposed, is inserted in the Agfa Digitizer CR 10-X where the image plate is taken out of the cassette and then scanned so that the scanned image can be displayed for viewing.
FDA Enforcement
Class II
·Terminated·AGFA Corp.·March 27, 2013
Luminos Agile Max -Intended to visualize anatomical structures by converting an x-ray pattern into a visible image. Model Number: 10762472
FDA Enforcement
Class II
·Ongoing·Siemens Medical Solutions USA, Inc·August 14, 2024
DRX-Evolution with FF WS These products are permanently installed diagnostic x-ray systems composed of 4 main components: an operator console, over head tube crane, x-ray tube assembly including a collimator and stationary generator. In addition the device can use an x-ray table and /or wallstand/bucky to complete x-ray exposures. The DRX-Evolution system is a permanently installed diagnostic x-ray system for generation of x-rays for examination of various anatomical regions.
FDA Enforcement
Class II
·Terminated·Carestream Health, Inc.·January 29, 2014
AXIOM Artis or Artis zee system Product Usage: Axiom Artis and Artis zee / zeego are dedicated angiography systems developed for single and biplane diagnostic imaging and interventional procedures including, but not limited to, pediatric and obese patients. Procedures that can be performed include cardiac angiography, neuro angiography, general angiography, rotational angiography, multipurpose angiography and whole body radiographic/fluoroscopic procedures
FDA Enforcement
Class II
·Terminated·Siemens Medical Solutions USA, Inc·October 1, 2014