BEUDAMED
    13 results · 26ms · Sources: EU EUDAMED, US FDA

    Get notified when this changes

    We'll email you when new records match this search — new devices, new clearances, certificate changes, or withdrawals.
    Filters Classification: Class Ii ×

    Intraosseous Fixation System (IFS) 1.7 mm, 2.0 mm & 2.5 mm Cannulated Drill Bit. Intended to stabilize and aid in fixation of fractures.

    FDA Enforcement
    Class II ·Terminated·Orthohelix Surgical Designs Inc·April 3, 2013

    MaxLock Extreme Mod-Foot Concave Reamer; Individually packaged in a 3 x 4 bag and heat sealed with label on the outside. Used during procedures to clear away bone and cartilage within the desired implant area.

    FDA Enforcement
    Class II ·Terminated·Orthohelix Surgical Designs Inc·October 15, 2014

    OrthoHelix Part #HCS-056-32 3.2MM Cannulated Hex Driver NON STERILE MAT: 465 SS The drivers are used to drive screws in the Mini MaxTorque Screw System, which is intended to be used to stabilize and aid in the fusion of fractures and osteotomies involving small bones of the hand, wrist, afoot, and ankle.

    FDA Enforcement
    Class II ·Terminated·Orthohelix Surgical Designs Inc·October 17, 2012

    OrthoHelix Part #HCS-056-32 3.8MM Cannulated Hex Driver NON STERILE MAT: 465 SS The drivers are used to drive screws in the Mini MaxTorque Screw System, which is intended to be used to stabilize and aid in the fusion of fractures and osteotomies involving small bones of the hand, wrist, afoot, and ankle.

    FDA Enforcement
    Class II ·Terminated·Orthohelix Surgical Designs Inc·October 17, 2012

    Anspach Effort, Inc., 98-0061 MA-15C Bearing Sleeve with Removable Bur Guard. A reusable device used with dissection tools; designed for Transphenoidal and Skull base procedures.

    FDA Enforcement
    Class II ·Terminated·The Anspach Effort, Inc.·February 13, 2013

    Accessory Adapter Part number 600525A0 Product Usage: designed for the mounting of MAQUET accessories with the dovetail guide interface immediately before, during and after surgical interventions as well as for examination and treatment.

    FDA Enforcement
    Class II ·Terminated·Maquet Medical Systems USA·November 16, 2016

    Disposable 25GA Vitrectomy Cutter, REF NGP0025, RX Only, Abbott Medical Optics Inc., The product provides the item necessary to perform one vitrectomy procedure. It is used to remove vitreous from the eye. It has been designed as a disposable (single use)

    FDA Enforcement
    Class II ·Terminated·Johnson & Johnson Surgical Vision Inc·July 10, 2019

    Brand Name: Alcon Laboratories, Inc. Product Name: Custom Pak Model/Catalog Number: Many - See 'Attachment 1 - Affected Product List' Software Version: N/A Product Description: Alcon Custom Paks are customer-designed sterile surgical procedure packs / convenience kits intended for use by trained ophthalmic surgeons in a variety of ophthalmic surgeries. Custom Pak is a collection of various ophthalmic surgical instruments and the necessary materials necessary to perform an ophthalmic surgical procedure. Component: N/A

    FDA Enforcement
    Class II ·Ongoing·Alcon Research LLC·July 16, 2025

    MicroCutter Xchange 30 Blue Curved Tip Cartridge. Model Number: FG-025321; The MicroCutter XCHANGE 30 Blue Cartridge and MicroCutter XCHANGE 30 Blue Curved Tip Cartridge contain 316L stainless steel staples. The cartridges are used with the MicroCutter XCHANGE 30 Stapler, which is a single patient device. When the MicroCutter XCHANGE 30 Stapler is loaded with a MicroCutter XCHANGE 30 Cartridge, two double rows of 316L stainless steel staples are delivered while simultaneously transecting tissue between the two, double staple rows. The MicroCutter XCHANGE 30 Stapler and MicroCutter XCHANGE 30 Cartridge are designed for introduction and use through a 5mm trocar cannula or larger. The staple line length is 30 mm long. The Stapler can be loaded, fired, and reloaded with the MicroCutter XCHANGE 30 Cartridge for up to the number deployments indicated on package label in a single surgical procedure. The Stapler can fire different sized staples, with the size of the staple indicated by the color of the MicroCutter XCHANGE Cartridges. Intended for use in multiple open or minimally invasive surgical procedures for the transaction, resection, and /or creation of anastomoses in small and large intestine as well as the transection of the appendix.

    FDA Enforcement
    Class II ·Terminated·Cardica, Inc.·December 30, 2015

    Mobi-C 14mm Distraction Screw, Quick Start. Intended for cervical intervertebral disc replacement. Item Number: 0024-LDR TEDAN SURGICAL INNOVATIONS LLC DISTRIBUTED BY: LDR SPINE USA, INC., 13785 RESEARCH BLVD, SUITE 200- AUSTIN, TX 78750 Product Usage: The device is intended as a cervical intervertebral disc replacement at one or two contiguous levels from C3 to C7 designed to maintain/restore segmental motion and disc height. MOBI-C distraction pins are inserted into the vertebral body below and above the disc that is to have the disc replacement. The pins are then attached to a locking retractor/distractor to open up the disc space in order to complete the discectomy and overall distraction during the surgery

    FDA Enforcement
    Class II ·Terminated·Zimmer Biomet, Inc.·June 26, 2019

    Trinica Anterior Lumbar Plate (ALP) system, part 07.01058.001. Non Sterile, Rx only. The Trinica Anterior Lumbar Plate System is a temporary supplemental fixation device consisting of a variety of shapes and sizes of plates and screws. The Trinica Anterior Lumbar Plate System is used as an implant for the correction and stabilization of the spine. This system provides temporary stabilization and augments the development of a solid spinal fusion. Additionally, this system provides the surgeon with the ability to supplement an interbody device with anterior plate fixation. The Trinica Anterior Lumbar Plate System components can be locked into a variety of configurations and each construct may be customized to individual cases. The plates are low profile and anatomically designed to provide optimal fit from either anterior or anterior-lateral approach. This system also features anti-migration locking caps to help secure the fixation screws. All Trinica Anterior Lumbar Plate System implant components are made from titanium alloy (Ti-6AI-4V). The Trinica Anterior Lumbar Plate System is indicated for use via the lateral or anterolateral surgical approach above the bifurcation of the great vessels or via the anterior surgical approach, below the bifurcation of the great vessels. This system is indicated in the treatment of lumbar or lumbosacral (L1-SI) spine instability as a result of fracture (including dislocation and subluxation), tumor, degenerative disc disease (defined as back pain of discogenic origin with degeneration of the disc confirmed by history and radiographic studies), pseudoarthrosis, spondylolisthesis, scoliosis, lordotic deformities of the spine, spinal stenosis, or a failed previous fusion.

    FDA Enforcement
    Class II ·Terminated·Zimmer, Inc.·November 27, 2013

    NuOss XC Sinus Reference No 509-3001 (BMCU17, size 17 mm diameter x 10 mm height) Reference No 509-3002 (BMCU22, size 22 mm diameter x 12 m height) Manufacturer:- Collagen Matrix, Distributor:- ACE Surgical Supply Co, Inc, Intended use for dental surgery such as -augmentation or reconstructive treatment of alveoloar ridge -filling of infrabony periodontal defects -filling of defects after root resection, apicoectomy and cystectomy -filling of extraction sockets to enhance preservation of the alveolar ridge -elevation of maxillary sinus floor -filling of periodontal defects in conjunction with products intended for Guided Tissue Regeneration (GTR) and Guided Bone Regeneration (GBR) -Filling of pre-implant defects in conjunction with products intended for Guided Bone Regeneration

    FDA Enforcement
    Class II ·Terminated·Collagen Matrix Inc·March 23, 2016

    MicroCutter Xchange 30 Blue Cartridge, FG-025320; The MicroCutter XCHANGE 30 Blue Cartridge and MicroCutter XCHANGE 30 Blue Curved Tip Cartridge contain 316L stainless steel staples. The cartridges are used with the MicroCutter XCHANGE 30 Stapler, which is a single patient device. When the MicroCutter XCHANGE 30 Stapler is loaded with a MicroCutter XCHANGE 30 Cartridge, two double rows of 316L stainless steel staples are delivered while simultaneously transecting tissue between the two, double staple rows. The MicroCutter XCHANGE 30 Stapler and MicroCutter XCHANGE 30 Cartridge are designed for introduction and use through a 5mm trocar cannula or larger. Intended for use in multiple open or minimally invasive surgical procedures for the transaction, resection, and /or creation of anastomoses in small and large intestine as well as the transection of the appendix.

    FDA Enforcement
    Class II ·Terminated·Cardica, Inc.·December 30, 2015