22 results
·
19ms
·
Sources: EU EUDAMED, US FDA
Filters
Classification: Class Ii
×
G3 Opticage Expandable Interbody Fusion Device, Model No. 9180-00, 9180-01, 9180-06, 9180-07, 9180-17, 9101-00, 9101-06 The Opticage Expandable Interbody Fusion Device is a posterior lumbar intervertebral body fusion device and is indicated for use with autogenous bone graft in patients with degenerative disc disease (DDD) at one or two contiguous levels from L2-S1. These DDD patients may also have up to Grade I spondylolisthesis or retrolisthesis at the involved level(s). The Opticage Interbody Fusion Device can be implanted via posterior, transforaminal or lateral approach. DDD is defined as discogenic back pain with degeneration of the disc confirmed by history and radiographic studies. Candidates for surgery should be skeletally mature and have had six months of conservative treatment. These patients may have had primary or secondary surgery, but no previous fusion at the involved levels. The device is not intended to be used as a stand-alone device. It must be used with supplemental internal spinal fixation systems that have been cleared for use in the lumbar spine (i.e. facet screw fixation systems, facet compression devices and posterior pedicle screw and rod systems).
FDA Enforcement
Class II
·Terminated·Interventional Spine Inc·January 11, 2017
Artis systems with large display from Siemens Medical Solutions USA, Inc. Interventional Fluoroscopic X-ray for angiographic procedures.
FDA Enforcement
Class II
·Terminated·Siemens Medical Solutions USA, Inc·December 30, 2015
BridgePoint Medical, Stingray Catheter, REF M - 1000, Sterilized with Ethylene Oxide Gas, Prescription Only, Manufacturer BridgePoint Medical Inc. 13355 10th Ave N, Suite 110, Plymouth, MN 55441. Stingray" Catheters are intended to facilitate the intraluminal placement of conventional guidewires beyond stenotic coronary lesions (including chronic total occlusions) prior to PTCA or stent intervention. When used as part of the BridgePoint Medical System, the Stingray Catheter is intended to facilitate the intraluminal placement of conventional guidewires beyond stenotic coronary lesions (including chronic total occlusions [CTOs]) prior to PTCA or stent intervention. .
FDA Enforcement
Class II
·Terminated·Bridgepoint Medical·August 1, 2012
Guardian II Hemostasis Valve, Model 8210 and Guardian II NC Hemostasis Valve, Model FH102. Intended to maintain hemostasis during the use of diagnostic/interventional devices. The device is indicated for maintaining a seal around diagnostic/interventional devices with outside diameters up to 8.0F (2.67 mm or 0.105") during diagnostic/interventional procedures.
FDA Enforcement
Class II
·Terminated·Vascular Solutions, Inc.·September 26, 2012
Stryker Neurovascular, AXS Infinity LS Plus Long Sheath, Rx Only, Sterile EO, USA Customer Service 855-91 NEURO (916-3876): a) REF: INC-11196-70, 70cm, b) REF: INC-11196-80, 80cm, c) REF: INC-11196-90, 90cm Product Usage: Indications for Use: The AXS Infinity LS Plus Long Sheath is indicated for the introduction of interventional devices into the peripheral, coronary, and neuro vasculature. Device Description: The AXS Infinity LS Plus Long Sheath is a single lumen, flexible, variable stiffness long sheath with an 0.091 inch inner diameter. It has a radiopaque marker band on the distal end and a Luer hub at the proximal end. The AXS Infinity LS Plus Long Sheath shaft has a 10 cm lubricious coating at the distal end to reduce friction during use. The inner lumen of the AXS Infinity LS Plus Long Sheath is compatible with 6F or smaller catheters. Each package includes one AXS Infinity LS Plus Long Sheath (INC- 11196-70, INC-11196-80, or INC-11196-90), one Dilator, and one hemostasis valve. Dimensions of the AXS Infinity LS Plus Long Sheath are included on the individual device label.
FDA Enforcement
Class II
·Terminated·Stryker Neurovascular·June 12, 2019
Artis One, Interventional, Fluoroscopic, x-ray system Artis one is an angiography system developed for diagnostic imaging and interventional procedures including, but not limited to, pediatric and obese patients. Procedures that can be performed with the Artis One include cardiac angiography, neuro-angiography, general angiography, rotational angiography, multipurpose angiography and whole body radiographic/fluoroscopic procedures as well as procedures next to the table for patient extremities.
FDA Enforcement
Class II
·Terminated·Siemens Medical Solutions USA, Inc·April 6, 2016
Accessory Adapter Part number 600525A0 Product Usage: designed for the mounting of MAQUET accessories with the dovetail guide interface immediately before, during and after surgical interventions as well as for examination and treatment.
FDA Enforcement
Class II
·Terminated·Maquet Medical Systems USA·November 16, 2016
Medline Angio Drape Pack Radiology-LF; a sterile custom single patient prescription procedure pack, including a waste bag, for use by the Interventional Radiology Department; Packaged for Medline Industries, Inc.; Reorder #DYNJ35993D This custom pack includes components necessary for a specific procedure.
FDA Enforcement
Class II
·Terminated·Medline Industries Inc·December 26, 2012
Ring Transjugular Intrahepatic Access Set Product Usage: The Ring Transjugular Intrahepatic Access Sets are intended for transjugular liver access in diagnostic and interventional procedures. The Ring Transjugular Intrahepatic Access Set consists of the following components: Flexor RTPS Guiding Sheath, needle, catheter, Dilator, Torcon NB Advantage Catheter, Van Andel Dilatation Catheter, Curved Newton Wire Guide, Amplatz Extra Stiff Wire Guide.
FDA Enforcement
Class II
·Terminated·Cook Inc.·July 29, 2015
Ziehm Solo FD. Interventional fluoroscopic x-ray system
FDA Enforcement
Class II
·Ongoing·Orthoscan, Inc.·December 11, 2024
Ziehm Vision FD. Interventional fluoroscopic x-ray system
FDA Enforcement
Class II
·Ongoing·Orthoscan, Inc.·December 11, 2024
Flexor RTPS Guiding Sheath Product Usage: The Flexor RTPS Guiding Sheaths are intended for introduction of balloons, closed and non-tapered end catheters or other diagnostic and interventional devices. These curved sheaths are manufactured from material incorporating a stainless steel wire imbedded in the sheath shaft material with a soft tip and a Check-Flo¿ fitting at the proximal end. The sheath is accompanied by a dilator for access to the body as a catheter over the wire guide.
FDA Enforcement
Class II
·Terminated·Cook Inc.·July 29, 2015
Ziehm Vision RFD. Interventional fluoroscopic x-ray system
FDA Enforcement
Class II
·Ongoing·Orthoscan, Inc.·December 11, 2024
FIBERNET Embolic Protection System: Recommended Vessel Diameter 3.5 0 5.0 mm, Maximum Guidewire Diameter: 0.014 in ( 0.36 mm) Rx only, Sterile; Manufactured in: Invatec S.P.A., Italy; Manufacturer: Medtronic Inc. Minneapolis, MN. The FiberNet Embolic Protection System is indicated for use as a guidewire and emboli protection system to capture and remove embolic material (thrombus/debris) produced while performing percutaneous transluminal interventional procedures in carotid arteries in high surgical risk patients with reference vessel diameters of 3.5 mm to 7.0 mm.
FDA Enforcement
Class II
·Terminated·Medtronic Vascular, Inc.·April 2, 2014
FIBERNET Embolic Protection System: Recommended Vessel Diameter 6.0 -7.0 mm, Maximum Guidewire Diameter: 0.014 in (0.36mm) Rx only, Sterile; Manufactured in: Invatec S.P.A., Italy; Manufacturer: Medtronic Inc. Minneapolis, MN. The FiberNet Embolic Protection System is indicated for use as a guidewire and emboli protection system to capture and remove embolic material (thrombus/debris) produced while performing percutaneous transluminal interventional procedures in carotid arteries in high surgical risk patients with reference vessel diameters of 3.5 mm to 7.0 mm.
FDA Enforcement
Class II
·Terminated·Medtronic Vascular, Inc.·April 2, 2014
FIBERNET Embolic Protection System: Recommended Vessel Diameter 5.0 -6.0 mm, Maximum Guidewire Diameter: 0.014 in (0.36mm) Rx only, Sterile; Manufactured in: Invatec S.P.A., Italy; Manufacturer: Medtronic Inc. Minneapolis, MN. The FiberNet Embolic Protection System is indicated for use as a guidewire and emboli protection system to capture and remove embolic material (thrombus/debris) produced while performing percutaneous transluminal interventional procedures in carotid arteries in high surgical risk patients with reference vessel diameters of 3.5 mm to 7.0 mm.
FDA Enforcement
Class II
·Terminated·Medtronic Vascular, Inc.·April 2, 2014
EndoGastric Solutions EsophyX2 Device with Serosa Fastener and Accessories. Models R2001 and R2002. Indicated for the treatment of symptomatic chronic gastroesophageal reflux disease.
FDA Enforcement
Class II
·Terminated·Endogastric Solutions Inc·August 28, 2013
Vascular Solutions, SuperCross Microcatheter, Sterilized using ethylene oxide, Rx Only, Model numbers 5300 - 5307, 5324, 5325, 5329, 5332, 5336, 5340, and 5341. Product Usage: The SuperCross catheter is intended to be used in conjunction with steerable guidewires to access discrete regions of the coronary and/or peripheral vasculature. It may be used to facilitate placement and exchange of guidewires and other interventional devices and to subselectively infuse/deliver diagnostic and therapeutic agents
FDA Enforcement
Class II
·Terminated·Vascular Solutions, Inc.·February 27, 2013
The Symbia Intevo Excel is a non-diagnostic SPECT ICT system with CT support for only attenuation correction and anatomical localization. The Symbia Intevo Series are xSPECT systems. These are SPECT and T systems integrated through xSPECT technology during image registration and reconstruction. This xSPECT integration enables the use of extra-modal information for high image quality and quantification. The Siemens Symbia series is intended for use by appropriately trained health care professionals to aid in detecting, localizing, diagnosing, staging and restaging of lesions, tumors, disease and organ function for the evaluation of diseases and disorders such as, but not limited to, cardiovascular disease, neurological disorders and cancer. The images produced by the system can also be used by the physician to aid in radiotherapy treatment planning and interventional radiology procedures. SPECT: To detect or image the distribution of radionuclides in the body or organ, using the following techniques: planar imaging, whole body imaging, tomographic imaging for isotopes with energies up to 5S8keV. CT: The CT component is intended to produce cross-sectional images of the body by computer reconstruction of x-ray transmission data from either the same axial plane taken at different angles or spiral planes taken at different angles. SPECT+CT: Perform CT scans and nuclear imaging studies with the same instrument. To obtain attenuation corrected images and to provide registration of anatomical and physiological images within the patient's anatomy. Software: The MI Applications software is a display and analysis package intended to aid the clinician in the assessment and quantification of pathologies taken from SPECT, PET, CT and other imaging modalities.
FDA Enforcement
Class II
·Terminated·Siemens Medical Solutions USA, Inc.·January 14, 2015
Biograph mCT Systems: (a) Biograph mCT S(64)-3R, Material Number 10248669 Product Usage: The Siemens Biograph mCT and Biograph mCT Flow systems are combined X-Ray Computed Tomography (CT) and Positron Emission Tomography (PET) scanners that provide registration and fusion of high resolution physiologic and anatomic information. The CT component produces cross-sectional images of the body by computer reconstruction of X-Ray transmission data from either the same axial plane taken at different angles or spiral planes taken at different angles. The PET subsystem images and measures the distribution of PET radiopharmaceuticals in humans for the purpose of determining various metabolic (molecular) and physiologic functions within the human body and utilizes the CT for fast attenuation correction maps for PET studies and precise anatomical reference for the fused PET and CT images. The system maintains independent functionality of the CT and PET devices, allowing for single modality CT and / or PET diagnostic imaging. These systems are intended to be utilized by appropriately trained health care professionals to aid in detecting, localizing, diagnosing, staging and restaging of lesions, tumors, disease and organ function for the evaluation of diseases and disorders such as, but not limited to, cardiovascular disease, neurological disorders and cancer. The images produced by the system can also be used by the physician to aid in radiotherapy treatment planning and interventional radiology procedures. (b) Biograph mCT S(40)-4R, Material Number 10248671 (c) Biograph mCT S(64)-4R, Material Number 10248672 (d) Biograph mCT X-4R, Material Number 10248670 (e) Biograph mCT X-3R, Material Number 10248673 (f) BIOGRAPH mCT 20 Excel, Material Number 10507786 (g) Biograph mCT Flow Edge-4R, Material Number 10528955 (h) Biograph mCT S(40)-3R, Material Number 10248668 (i) Bio mCT-S(40) 3R->4R Upgrade, Material Number 10250743 (j) Biograph mCT Flow 40-4R, Material Number 10529159 (k) Biograph mCT-X w/TrueV Upgrade, Material Number 10250745
FDA Enforcement
Class II
·Terminated·Siemens Medical Solutions USA, Inc.·June 27, 2018