6 results · 9ms · Sources: EU EUDAMED, US FDA

Get notified when this changes

We'll email you when new records match this search — new devices, new clearances, certificate changes, or withdrawals.

Name: Pasteur Pipets, used by the embryologist in the IVF Laboratory. Model numbers: PP-5.75-90 PP-9-90 PP-5.75-90PL PP-9-90PL

FDA Enforcement
Class II ·Terminated·ORIGIO, Inc·July 9, 2014

The ZYTO Select and ZYTO Elite software programs are used to rank pairs of galvanic skin response measurements from most coherent (the second scan is closest in time measurement to the baseline original scan) to least coherent (further away from the baseline).

FDA Enforcement
Class II ·Terminated·ZYTO Technologies, Inc.·July 13, 2016

Original M.E. Mueller" Low Profile Cup Sterile, Rx

FDA Enforcement
Class II ·Terminated·Zimmer, Inc.·November 14, 2012

USA-002 Rev A brochure is a two sided tri-fold printed marketing brochure describing the approved labeling indications for use, precautions and general operational information of the Exer-Rest device, Models AT3800 and AT4700. Brochure: "EXER-REST***A patented, FDA registered, Acceleration Therapeutics device delivering Whole Body Periodic Acceleration to the user for symptomatic relief of a wide range of complaints***Whole Body Periodic Acceleration (WBPA)***WBPA is accomplished utilizing the Ever-Rest device to move the body repetitively head to foot at approximately 140 times a minute. This repetitive motion adds pulses to your natural vascular pulse with each acceleration and deceleration of the body. These additional pulses act on the inner lining of blood vessels (endothelium) throughout the body, a process called pulsatile shear stress, to promote the release of beneficial substances (mediators). These mediators, such as nitric oxide, provide a wide range of health benefits that originate from the user's own body.***Nitric Oxide (NO) is released from endothelial cells that line the arterial walls. NO signals vascular smooth muscle to relax, thereby increasing blood flow throughout the circulation.***NiMS 4400 Biscayne Blvd., Miami, FL 33137 P 305.575.4200 F 305357534201***[email protected] www.nims-inc.com***NIMS, Acceleration Therapeutics and Exer-Rest are registered trademarks of Non-Invasive Monitoring Systems, Inc.***USA-002 Rev A***" Printed marketing brochure

FDA Enforcement
Class II ·Terminated·Non-Invasive Monitoring Systems, Inc.·June 27, 2012

RTI Surgical Streamline OCT Occipito-Cervico-Thoracic Spinal Rod, CoCr, 3.2mm (D) x 240mm (L) Product Usage: When intended to promote fusion of the cervical spine and occipitocervico-thoracic junction (occiput-T3), the Streamline OCT Occipito-Cervico-Thoracic System is intended for: degenerative disc disease (as defined by neck or back pain of discogenic origin with degeneration of the disc confirmed by history and radiographic studies), spondylolisthesis, spinal stenosis, fracture/ dislocation, atlanto/axial fracture with instability, occipito-cervical dislocation, deformities or curvature, tumors, pseudoarthrosis, and revision of previous cervical and upper thoracic spine surgery. The occipital bone screws are limited to occipital fixation only. The use of the pedicle screws (standard and high angle) is limited to placement in the upper thoracic spine (T1-T3) in treating thoracic conditions only. The pedicle screws are not intended for use in the cervical spine. The hooks, connectors, and rods are also intended to provide stabilization to promote fusion following reduction of fracture/ dislocation or trauma in the cervical/ upper thoracic (C1-T3) spine.

FDA Enforcement
Class II ·Terminated·RTI Surgical, Inc. (dba Pioneer Surgical Technology, Inc.)·October 26, 2016

Trinica Anterior Lumbar Plate (ALP) system, part 07.01058.001. Non Sterile, Rx only. The Trinica Anterior Lumbar Plate System is a temporary supplemental fixation device consisting of a variety of shapes and sizes of plates and screws. The Trinica Anterior Lumbar Plate System is used as an implant for the correction and stabilization of the spine. This system provides temporary stabilization and augments the development of a solid spinal fusion. Additionally, this system provides the surgeon with the ability to supplement an interbody device with anterior plate fixation. The Trinica Anterior Lumbar Plate System components can be locked into a variety of configurations and each construct may be customized to individual cases. The plates are low profile and anatomically designed to provide optimal fit from either anterior or anterior-lateral approach. This system also features anti-migration locking caps to help secure the fixation screws. All Trinica Anterior Lumbar Plate System implant components are made from titanium alloy (Ti-6AI-4V). The Trinica Anterior Lumbar Plate System is indicated for use via the lateral or anterolateral surgical approach above the bifurcation of the great vessels or via the anterior surgical approach, below the bifurcation of the great vessels. This system is indicated in the treatment of lumbar or lumbosacral (L1-SI) spine instability as a result of fracture (including dislocation and subluxation), tumor, degenerative disc disease (defined as back pain of discogenic origin with degeneration of the disc confirmed by history and radiographic studies), pseudoarthrosis, spondylolisthesis, scoliosis, lordotic deformities of the spine, spinal stenosis, or a failed previous fusion.

FDA Enforcement
Class II ·Terminated·Zimmer, Inc.·November 27, 2013