BEUDAMED
    35 results · 29ms · Sources: EU EUDAMED, US FDA

    Get notified when this changes

    We'll email you when new records match this search — new devices, new clearances, certificate changes, or withdrawals.
    Filters FDA Enforcement ×

    G3 Opticage Expandable Interbody Fusion Device, Model No. 9180-00, 9180-01, 9180-06, 9180-07, 9180-17, 9101-00, 9101-06 The Opticage Expandable Interbody Fusion Device is a posterior lumbar intervertebral body fusion device and is indicated for use with autogenous bone graft in patients with degenerative disc disease (DDD) at one or two contiguous levels from L2-S1. These DDD patients may also have up to Grade I spondylolisthesis or retrolisthesis at the involved level(s). The Opticage Interbody Fusion Device can be implanted via posterior, transforaminal or lateral approach. DDD is defined as discogenic back pain with degeneration of the disc confirmed by history and radiographic studies. Candidates for surgery should be skeletally mature and have had six months of conservative treatment. These patients may have had primary or secondary surgery, but no previous fusion at the involved levels. The device is not intended to be used as a stand-alone device. It must be used with supplemental internal spinal fixation systems that have been cleared for use in the lumbar spine (i.e. facet screw fixation systems, facet compression devices and posterior pedicle screw and rod systems).

    FDA Enforcement
    Class II ·Terminated·Interventional Spine Inc·January 11, 2017

    Artis systems with large display from Siemens Medical Solutions USA, Inc. Interventional Fluoroscopic X-ray for angiographic procedures.

    FDA Enforcement
    Class II ·Terminated·Siemens Medical Solutions USA, Inc·December 30, 2015

    BridgePoint Medical, Stingray Catheter, REF M - 1000, Sterilized with Ethylene Oxide Gas, Prescription Only, Manufacturer BridgePoint Medical Inc. 13355 10th Ave N, Suite 110, Plymouth, MN 55441. Stingray" Catheters are intended to facilitate the intraluminal placement of conventional guidewires beyond stenotic coronary lesions (including chronic total occlusions) prior to PTCA or stent intervention. When used as part of the BridgePoint Medical System, the Stingray Catheter is intended to facilitate the intraluminal placement of conventional guidewires beyond stenotic coronary lesions (including chronic total occlusions [CTOs]) prior to PTCA or stent intervention. .

    FDA Enforcement
    Class II ·Terminated·Bridgepoint Medical·August 1, 2012

    Guardian II Hemostasis Valve, Model 8210 and Guardian II NC Hemostasis Valve, Model FH102. Intended to maintain hemostasis during the use of diagnostic/interventional devices. The device is indicated for maintaining a seal around diagnostic/interventional devices with outside diameters up to 8.0F (2.67 mm or 0.105") during diagnostic/interventional procedures.

    FDA Enforcement
    Class II ·Terminated·Vascular Solutions, Inc.·September 26, 2012

    HydroFinity Hydrophilic guidewire; 0.035 OD, Stiff Shaft, Straight Tip, 180 CM Length; Manufactured for Covidien, Plymouth, MN; Manufactured by: NDC Inc., Fremont, CA. The HydroFinity Hydrophilic guidewire facilitates the introduction and placement of catheters and interventional devices to the desired anatomical location during diagnostic or interventional procedures.

    FDA Enforcement
    Class I ·Terminated·Nitinol Devices and Components, Inc.·July 2, 2014

    HydroFinity Hydrophilic guidewire; Nitinol Guidewire with Hydrophilic Coating, Sterile. 0.035 OD, Stiff Shaft, Angled Tip, 150 CM Length; Manufactured for Covidien, Plymouth, MN; Manufactured by: NDC Inc., Fremont, CA Manufactured in Costa Rica The HydroFinity Hydrophilic guidewire facilitates the introduction and placement of catheters and interventional devices to the desired anatomical location during diagnostic or interventional procedures.

    FDA Enforcement
    Class I ·Terminated·Nitinol Devices and Components, Inc.·July 2, 2014

    HydroFinity Hydrophilic guidewire;Nitinol Guidewire with Hydrophilic Coating, Sterile. 0.035 OD, Stiff Shaft, Angled Tip, 260 CM Length; Manufactured for Covidien, Plymouth, MN; Manufactured by: NDC Inc., Fremont, CA. Manufactured in Costa Rica The HydroFinity Hydrophilic guidewire facilitates the introduction and placement of catheters and interventional devices to the desired anatomical location during diagnostic or interventional procedures.

    FDA Enforcement
    Class I ·Terminated·Nitinol Devices and Components, Inc.·July 2, 2014

    HydroFinity Hydrophilic guidewire; Nitinol Guidewire with Hydrophilic Coating, Sterile. 0.035 OD, Stiff Shaft, Straight Tip, 260 CM Length; Manufactured for Covidien, Plymouth, MN; Manufactured by: NDC Inc., Fremont, CA; Manufactured in Costa Rica The HydroFinity Hydrophilic guidewire facilitates the introduction and placement of catheters and interventional devices to the desired anatomical location during diagnostic or interventional procedures.

    FDA Enforcement
    Class I ·Terminated·Nitinol Devices and Components, Inc.·July 2, 2014

    HydroFinity Hydrophilic guidewire; Nitinol Guidewire with Hydrophilic Coating, Sterile. 0.035 OD, Standard Shaft, Straight Tip, 260 CM Length Manufactured for Covidien, Plymouth, MN; Manufactured by: NDC Inc., Fremont, CA. Manufactured in Costa Rica The HydroFinity Hydrophilic guidewire facilitates the introduction and placement of catheters and interventional devices to the desired anatomical location during diagnostic or interventional procedures.

    FDA Enforcement
    Class I ·Terminated·Nitinol Devices and Components, Inc.·July 2, 2014

    HydroFinity Hydrophilic guidewire; Nitinol Guidewire with Hydrophilic Coating, Sterile. 0.035 OD, Standard Shaft, Angled Tip, 180 CM Length; Manufactured for Covidien, Plymouth, MN; Manufactured by: NDC Inc., Fremont, CA. Manufactured in Costa Rica The HydroFinity Hydrophilic guidewire facilitates the introduction and placement of catheters and interventional devices to the desired anatomical location during diagnostic or interventional procedures.

    FDA Enforcement
    Class I ·Terminated·Nitinol Devices and Components, Inc.·July 2, 2014

    HydroFinity Hydrophilic guidewire; Nitinol Guidewire with Hydrophilic Coating, Sterile. 0.035 OD, Stiff Shaft, Straight Tip, 150 CM Length; Manufactured for Covidien, Plymouth, MN; Manufactured by: NDC Inc., Fremont, CA. Manufactured in Costa Rica The HydroFinity Hydrophilic guidewire facilitates the introduction and placement of catheters and interventional devices to the desired anatomical location during diagnostic or interventional procedures.

    FDA Enforcement
    Class I ·Terminated·Nitinol Devices and Components, Inc.·July 2, 2014

    HydroFinity Hydrophilic guidewire; Nitinol Guidewire with Hydrophilic Coating, Sterile. 0.035 OD, Standard Shaft, Straight Tip, 150 CM Length Manufactured for Covidien, Plymouth, MN; Manufactured by: NDC Inc., Fremont, CA. Manufactured in Costa Rica The HydroFinity Hydrophilic guidewire facilitates the introduction and placement of catheters and interventional devices to the desired anatomical location during diagnostic or interventional procedures.

    FDA Enforcement
    Class I ·Terminated·Nitinol Devices and Components, Inc.·July 2, 2014

    HydroFinity Hydrophilic guidewire; Nitinol Guidewire with Hydrophilic Coating, Sterile. 0.035 OD, Standard Shaft, Angled Tip, 260 CM Length; Manufactured for Covidien, Plymouth, MN; Manufactured by: NDC Inc., Fremont, CA. Manufactured in Costa Rica The HydroFinity Hydrophilic guidewire facilitates the introduction and placement of catheters and interventional devices to the desired anatomical location during diagnostic or interventional procedures.

    FDA Enforcement
    Class I ·Terminated·Nitinol Devices and Components, Inc.·July 2, 2014

    HydroFinity Hydrophilic guidewire;Nitinol Guidewire with Hydrophilic Coating, Sterile. 0.035 OD, Stiff Shaft, Angled Tip, 180 CM Length; Manufactured for Covidien, Plymouth, MN; Manufactured by: NDC Inc., Fremont, CA Manufactured in Costa Rica. The HydroFinity Hydrophilic guidewire facilitates the introduction and placement of catheters and interventional devices to the desired anatomical location during diagnostic or interventional procedures.

    FDA Enforcement
    Class I ·Terminated·Nitinol Devices and Components, Inc.·July 2, 2014

    HydroFinity Hydrophilic guidewire; Nitinol Guidewire with Hydrophilic Coating, Sterile. 0.035 OD, Standard Shaft, Angled Tip, 150 CM Length Manufactured for Covidien, Plymouth, MN; Manufactured by: NDC Inc., Fremont, CA. Manufactured in Costa Rica The HydroFinity Hydrophilic guidewire facilitates the introduction and placement of catheters and interventional devices to the desired anatomical location during diagnostic or interventional procedures.

    FDA Enforcement
    Class I ·Terminated·Nitinol Devices and Components, Inc.·July 2, 2014

    HydroFinity Hydrophilic guidewire; Nitinol Guidewire with Hydrophilic Coating, Sterile.Nitinol Guidewire with Hydrophilic Coating, Sterile. 0.035 OD, Standard Shaft, Straight Tip, 180 CM Length; Manufactured for Covidien, Plymouth, MN; Manufactured by: NDC Inc., Fremont, CA. Manufactured in Costa Rica The HydroFinity Hydrophilic guidewire facilitates the introduction and placement of catheters and interventional devices to the desired anatomical location during diagnostic or interventional procedures.

    FDA Enforcement
    Class I ·Terminated·Nitinol Devices and Components, Inc.·July 2, 2014

    Stryker Neurovascular, AXS Infinity LS Plus Long Sheath, Rx Only, Sterile EO, USA Customer Service 855-91 NEURO (916-3876): a) REF: INC-11196-70, 70cm, b) REF: INC-11196-80, 80cm, c) REF: INC-11196-90, 90cm Product Usage: Indications for Use: The AXS Infinity LS Plus Long Sheath is indicated for the introduction of interventional devices into the peripheral, coronary, and neuro vasculature. Device Description: The AXS Infinity LS Plus Long Sheath is a single lumen, flexible, variable stiffness long sheath with an 0.091 inch inner diameter. It has a radiopaque marker band on the distal end and a Luer hub at the proximal end. The AXS Infinity LS Plus Long Sheath shaft has a 10 cm lubricious coating at the distal end to reduce friction during use. The inner lumen of the AXS Infinity LS Plus Long Sheath is compatible with 6F or smaller catheters. Each package includes one AXS Infinity LS Plus Long Sheath (INC- 11196-70, INC-11196-80, or INC-11196-90), one Dilator, and one hemostasis valve. Dimensions of the AXS Infinity LS Plus Long Sheath are included on the individual device label.

    FDA Enforcement
    Class II ·Terminated·Stryker Neurovascular·June 12, 2019

    Artis One, Interventional, Fluoroscopic, x-ray system Artis one is an angiography system developed for diagnostic imaging and interventional procedures including, but not limited to, pediatric and obese patients. Procedures that can be performed with the Artis One include cardiac angiography, neuro-angiography, general angiography, rotational angiography, multipurpose angiography and whole body radiographic/fluoroscopic procedures as well as procedures next to the table for patient extremities.

    FDA Enforcement
    Class II ·Terminated·Siemens Medical Solutions USA, Inc·April 6, 2016

    Vascular Solutions, Inc., Guardian II and Guardian II NC Hemostasis Valve, used in cardiopulmonary bypass. Model numbers: FH101, FH101-T, FH101-25, FH101-50, 8210, 8211, FH102, FH102-T, FH102-25, FH102-50, 8215, 8216, 8241, 8242, 8244, 8272 and 8274. Vascular Solutions Zerusa Limited. Intended to maintain hemostasis during the use of diagnostic/interventional devices during diagnostic/interventional procedures.

    FDA Enforcement
    Class I ·Terminated·Vascular Solutions, Inc.·March 27, 2013

    Accessory Adapter Part number 600525A0 Product Usage: designed for the mounting of MAQUET accessories with the dovetail guide interface immediately before, during and after surgical interventions as well as for examination and treatment.

    FDA Enforcement
    Class II ·Terminated·Maquet Medical Systems USA·November 16, 2016