42 results
·
12ms
·
Sources: EU EUDAMED, US FDA
LANX Timberline MPF Lateral Modular Plate Fixation System Straight Split Tip Driver - Short ("Driver"). Model Number 8630-0107. The Timberline MPF device is an intervertebral body fusion device consisting of a PEEK intervertebral spacer, titanium plate, and screws. The PEEK spacer has a generally rounded shape with various heights and footprints and has a hollowed out central area to accommodate autogenous bone graft. The upper and lower surfaces have a series of transverse grooves formed to improve stability and fixation once the device is inserted. The titanium plate has holes for receiving bone screws and a central hole for receiving a cover plate to prevent screw back-out. The Timberline MPF system is available in a variety of sizes and configurations to approximate anatomical variation in different vertebral levels and/or patient anatomy. The Timberline MPF system is provided nonsterile. The Driver is used with the Timberline MPF system to drive titanium screws through the plate and into the vertebrae thus locking plate to the vertebrae.
FDA Enforcement
Class II
·Terminated·Lanx, Inc.·December 4, 2013
Blood pressure (BP) circuit of the ANSAR ANX-3.0 Autonomic Monitor system. The ANX 3.0 system is comprised of these components. 1. Patient Physiological Monitor, 2. Laptop Computer, 3. Stand w/wheels, 4. Patient cables, 5. Software components (Respiratory and Cardiac Spectral Frequency Signal Processor). The different monitor components that can be used in the system are one of the following per system are as follows: Patient Physiological Monitors used: CJPS Vital Pro, Zoe Medical Nightingale Monitoring system, Ivy Biomedical model 405P, Software components: Ansar ANS C 3000. The device is also referred to as the ANS-C3000.
FDA Enforcement
Class II
·Terminated·Ansar Group, Inc. Dba Ansar Medical Technologies, Inc·August 27, 2014
The EOSedge system may acquire two simultaneous orthogonal planar images for a standing or seated patient at low dose. The scan length is defined by the user and may cover the whole body or a specific area (spine, lower limbs, etc.). EOSedge consists of a gantry and an acquisition workstation. ¿ The gantry contains two orthogonal acquisition units, each of which comprises an X-ray source (high frequency generator + X-ray tube + collimator) and an X-ray detection system (detector + electronics). ¿ The acquisition workstation and its software control the generators and detectors. It is also used to enter patient data, via RIS/HIS or manually, to define acquisition parameters, process images and record images in DICOM 3.0 format. The intended use/indications for use, technological characteristics, and principles of operation of the EOSedge system are described below.
FDA Enforcement
Class II
·Terminated·EOS Imaging·April 21, 2021
BNX Fine Need Aspiration System (22GA); Material/Part#: DSN-22-01
FDA Enforcement
Class II
·Terminated·Medtronic·March 22, 2017
BNX Fine Need Aspiration System (19GA); Material/Part #: DSN-19-01
FDA Enforcement
Class II
·Terminated·Medtronic·March 22, 2017
X-Ray Diagnostic Table, Model No. YSF-300 Use in combination with an X-ray high voltage generator, an X-ray tube unit, an Image intensifier and X-ray television unit, this table is applied for the following X-ray examinations: -X-ray T.V. fluoroscopy -Spot-filming -Bucky radiography
FDA Enforcement
Class II
·Terminated·Shimadzu Medical Systems·May 4, 2016
Carestream DRX Evolution System, X-Ray System --- The DRX-Evolution system is a permanently installed diagnostic x-ray system for generation of x-rays for examination of various anatomical regions.
FDA Enforcement
Class II
·Terminated·Carestream Health Inc.·August 21, 2013
Toshiba Infinix X-Ray Interventional System INFX-8000V/UU. An X-Ray system that is capable of radiographic and fluoroscopic studies used in an interventional setting.
FDA Enforcement
Class II
·Terminated·Toshiba American Medical Systems Inc·June 11, 2014
Medisystems 17 Gauge x 1" inch AV Fistula Needle Product Code: D9-2007MGLB Product Usage: Medisystems AVF with MasterGuard anti-stick needle protector is indicated for use as a vascular access device in hemodialysis or other extracorporeal procedures. It is intended for use in conjunction with a blood tubing set equipped with a standard medical male luer-locking connector
FDA Enforcement
Class II
·Terminated·Medisystems a NX Stage Company·January 30, 2013
Medisystems 15 Gauge x 3/5 inch Buttonhole Needle Set Product Code: BH-2035PE Product Usage: Medisystems Buttonhole Needle Sets are indicated for use as an access device for dialysis and pheresis procedures using a constant site orbuttonhole method of needle insertion.
FDA Enforcement
Class II
·Terminated·Medisystems a NX Stage Company·January 30, 2013
SHIMADZU Ceiling Type X-ray Tube Support CH-200/CH-200M Catalog Number: CH-200/CH-200M Holds an x-ray tube unit and collimator combined with an z-ray high voltage generator, radiographic stand, and table. It is designed to perform radiography of patients either in a standing or supine position
FDA Enforcement
Class II
·Terminated·Shimadzu Medical Systems Usa Com·July 5, 2017
CR MD1.0 General Set, x-ray imager image plate. CR 10-X Image Plate 35CM X 43CM. An image plate, contained in an X-Ray cassette, used to capture images from X-Ray exposures. The cassette with the image plate, once exposed, is inserted in the Agfa Digitizer CR 10-X where the image plate is taken out of the cassette and then scanned so that the scanned image can be displayed for viewing.
FDA Enforcement
Class II
·Terminated·AGFA Corp.·March 27, 2013
DRX-Evolution with FF WS These products are permanently installed diagnostic x-ray systems composed of 4 main components: an operator console, over head tube crane, x-ray tube assembly including a collimator and stationary generator. In addition the device can use an x-ray table and /or wallstand/bucky to complete x-ray exposures. The DRX-Evolution system is a permanently installed diagnostic x-ray system for generation of x-rays for examination of various anatomical regions.
FDA Enforcement
Class II
·Terminated·Carestream Health, Inc.·January 29, 2014
AXIOM Artis or Artis zee system Product Usage: Axiom Artis and Artis zee / zeego are dedicated angiography systems developed for single and biplane diagnostic imaging and interventional procedures including, but not limited to, pediatric and obese patients. Procedures that can be performed include cardiac angiography, neuro angiography, general angiography, rotational angiography, multipurpose angiography and whole body radiographic/fluoroscopic procedures
FDA Enforcement
Class II
·Terminated·Siemens Medical Solutions USA, Inc·October 1, 2014
DRX-Evolution with CSH WS These products are permanently installed diagnostic x-ray systems composed of 4 main components: an operator console, over head tube crane, x-ray tube assembly including a collimator and stationary generator. In addition the device can use an x-ray table and /or wallstand/bucky to complete x-ray exposures. The DRX-Evolution system is a permanently installed diagnostic x-ray system for generation of x-rays for examination of various anatomical regions.
FDA Enforcement
Class II
·Terminated·Carestream Health, Inc.·January 29, 2014
Luminos dRF Max, model no. 10762471 - Product Usage: Luminos dRF Max is a device intended to visualize anatomical structures by converting an X-ray pattern into a visible image. The system has medical applications ranging from gastrointestinal examinations to cranial, skeletal, thoracic and lung exposures as well as examinations of the urogenital tract.
FDA Enforcement
Class II
·Terminated·Siemens Medical Solutions USA, Inc·February 26, 2020
SIEMENS Healthineers Luminos Agile Max Model: 10762472 - Product Usage: is a device intended to visualize anatomical structures by converting an X-ray pattern into a visible image.
FDA Enforcement
Class II
·Terminated·Siemens Medical Solutions USA, Inc·August 12, 2020
SIEMENS Healthineers Uroskop Omnia max Model: 10762473 - Product Usage: is a device intended to visualize anatomical structures by converting an X-ray pattern into a visible image.
FDA Enforcement
Class II
·Terminated·Siemens Medical Solutions USA, Inc·August 12, 2020
SIEMENS Healthineers Luminos dRF Max Model: 10762471- Product Usage: is a device intended to visualize anatomical structures by converting an X-ray pattern into a visible image.
FDA Enforcement
Class II
·Terminated·Siemens Medical Solutions USA, Inc·August 12, 2020
DR 7500 with FF WS These products are permanently installed diagnostic x-ray systems composed of 4 main components: an operator console, over head tube crane, x-ray tube assembly including a collimator and stationary generator. In addition the device can use an x-ray table and /or wallstand/bucky to complete x-ray exposures. The DRX-Evolution system is a permanently installed diagnostic x-ray system for generation of x-rays for examination of various anatomical regions.
FDA Enforcement
Class II
·Terminated·Carestream Health, Inc.·January 29, 2014