BEUDAMED
    406 results · 12ms · Sources: EU EUDAMED, US FDA

    Get notified when this changes

    We'll email you when new records match this search — new devices, new clearances, certificate changes, or withdrawals.
    Filters FDA Enforcement × Status: Terminated × Clear all

    Medtronic HawkOne Directional Atherectomy System, Catalog numbers H1-S and H1-S-INT, Small Vessel, 6F (2.2 mm) Recommended sheath, 0.014" (0.36 mm) Compatible guidewire. The HawkOne directional atherectomy system is intended for use in atherectomy of the peripheral vasculature. The HawkOne catheter is indicated for use in conjunction with the SpiderFX embolic protection device in the treatment of severely calcified lesions. The HawkOne catheter is not intended for use in the coronary, carotid, iliac, or renal vasculature.

    FDA Enforcement
    Class I ·Terminated·ev3 Inc.·January 26, 2022

    Series OEC 9800. The Series OEC 9800 is designed to provide fluoroscopic and spot-film imaging of the patient,during diagnostic, surgical and interventional procedures.

    FDA Enforcement
    Class II ·Terminated·GE OEC Medical Systems, Inc·November 19, 2014

    GE HC OEC 9900 Elite and GE OEC 9800 Fluoroscopes Snubber Boards are a PCB with a 70 amp fuse to provide fused protection of internal system components from the high voltage system components, such as the X-ray tube or High Voltage Transformer. System model number A349855, Snubber Board number 00-880405-03 rev 5. This product is used for image intensified fluoroscopic x-rays for interventional radiologic procedures.

    FDA Enforcement
    Class II ·Terminated·GE OEC Medical Systems, Inc·August 29, 2012

    The Bio-Rad MONOLISA Anti-HBs EIA is for In Vitro Diagnostic Use and it has the catalog number 25220. It is a qualitative and quantitative enzyme immunoassay for the detection of antibody for hepatitis B surface antigen in human serum and EDTA or citrated plasma. The Bio-Rad MONOLISA Anti-HBs EIA is a qualitative and quantitative enzyme immunoassay for the detection of antibody for hepatitis B surface antigen in human serum and EDTA or citrated plasma. The assay results may be used as an aid in the determination of susceptibility to hepatitis B virus (HBV) infection in individuals prior to or following HBV vaccination or where vaccination status is unknown. Assay results may be used with other HBV serological markers for the laboratory diagnosis of HBV disease associated with HBV infection.

    FDA Enforcement
    Class II ·Terminated·Bio-Rad Laboratories·September 26, 2012

    VITROS Anti-HBs Calibrators & VITROS Anti-HBs Reagent Packs

    FDA Enforcement
    Class II ·Terminated·Ortho-Clinical Diagnostics·January 1, 2014

    VITROS¿ Immunodiagnostic Products Anti-HBs (total antibody to hepatitis B surface antigen (anti-HBs)) Reagent Packs For the quantitative in vitro determination of total antibody to hepatitis B surface antigen (anti-HBs) in human serum.

    FDA Enforcement
    Class III ·Terminated·Ortho-Clinical Diagnostics·May 1, 2013

    The spare component Anti-HBs Cutoff Calibrator, 10 mLU/mL, Catalog number 26154. The spare component is sold separately from the MONOLISA Anti-HBs EIA Kit contains an expiration date of 2016-04-30 in error.

    FDA Enforcement
    Class III ·Terminated·Bio-Rad Laboratories, Inc.·July 1, 2015

    K-Wire HBS Sterile, Item Number 19688 - Product Usage: Accessories to the BioPro Go-Ez screw system and the BioPro HBS System. It is intended for various orthopedic surgical procedures but is not intended for use in the spine.

    FDA Enforcement
    Class II ·Terminated·BioPro, Inc.·August 21, 2019

    K-Wire HBS Sterile Lot, Item Number 19688 - Product Usage: Accessories to the BioPro Go-Ez screw system and the BioPro HBS System. It is intended for various orthopedic surgical procedures but is not intended for use in the spine

    FDA Enforcement
    Class II ·Terminated·BioPro, Inc.·August 21, 2019

    Offset Femoral Alignment Guide 4mm x 6¿; Product Code: KS 67024 Product Usage: The instrumentation has been designed to facilitate bone preparation and implantation of the Apex Knee or Apex Hip Systems. Product Usage: The instrumentation has been designed to facilitate bone preparation and implantation of the Apex Knee or Apex Hip Systems

    FDA Enforcement
    Class II ·Terminated·Omnilife Science Inc.·September 2, 2015

    Conformis iTotal Hip Replacement System: HBS-033-00xx-010101, (HIP-PATIENT SPECIFIC STEM LEFT)

    FDA Enforcement
    Class II ·Terminated·Conformis, Inc.·June 19, 2019

    Conformis iTotal Hip Replacement System: HBS-033-00xx-020101, (HIP-PATIENT SPECIFIC STEM RIGHT)

    FDA Enforcement
    Class II ·Terminated·Conformis, Inc.·June 19, 2019

    iTotal Hip Replacement System, Model HBS-033-0015-020101, Size 15 Hip-Patient Specific Stem Right

    FDA Enforcement
    Class II ·Terminated·Conformis, Inc.·October 16, 2019

    iTotal Hip Replacement System, Model HBS-033-0013-020101, Size 13 Hip-Patient Specific Stem Right

    FDA Enforcement
    Class II ·Terminated·Conformis, Inc.·October 16, 2019

    .045 X 6 ST Guide Wire, Part number 45-0029-S, Sterile 10 pack of WS-1106ST and has a 6 inch length and 0.045 inch diameter. .054 X 7 ST Guide Wire, Part number 45-0031-S, Sterile 10 Pack of WS-1407ST and has a 7 inch length and 0.054 inch diameter. These guide wires are an orthopedic manual surgical instrument.

    FDA Enforcement
    Class II ·Terminated·Acumed LLC·March 22, 2017

    Nucleic Acid test intended for screening for MRSA/SA. Each kit has 20 tubes. in vitro diagnostic.

    FDA Enforcement
    Class II ·Terminated·Roche Molecular Systems, Inc.·April 4, 2018

    Vascular Solutions Twin-Pass .023" Dual Access Catheter, model 5230. Sterilized with Ethylene Oxide. The Twin-Pass dual access catheter is a dual lumen catheter designed for use in the coronary and/or peripheral vasculature. The Twin-Pass catheter (Models 5200 and 5230) consists of an over-the-wire (OTW) lumen that runs the length of the catheter and a rapid exchange (RX) delivery lumen on the distal segment. The Twin-Pass catheter has a working length of 135cm and is compatible with various guidewire diameters. Model 5200 also has hydrophilic coating on the distal 18cm of the catheter. The Twin-Pass catheter has white positioning marks located at 95cm (single mark) and 105cm (double marks) from the distal tip, respectively. The Twin-Pass catheter has a marker band located 1mm from the distal tip. Model 5200 contains a second marker band located 11mm from the distal tip to identify the distal end of the OTW lumen.

    FDA Enforcement
    Class I ·Terminated·Vascular Solutions, Inc.·October 26, 2016

    Vascular Solutions Twin-Pass Dual Access Catheter, models 5200, 5210, and 5230. Sterilized with Ethylene Oxide. The Twin-Pass dual access catheter is a dual lumen catheter designed for use in the coronary and/or peripheral vasculature. The Twin-Pass catheter (Models 5200 and 5230) consists of an over-the-wire (OTW) lumen that runs the length of the catheter and a rapid exchange (RX) delivery lumen on the distal segment. The Twin-Pass catheter has a working length of 135cm and is compatible with various guidewire diameters. Model 5200 also has hydrophilic coating on the distal 18cm of the catheter. The Twin-Pass catheter has white positioning marks located at 95cm (single mark) and 105cm (double marks) from the distal tip, respectively. The Twin-Pass catheter has a marker band located 1mm from the distal tip. Model 5200 contains a second marker band located 11mm from the distal tip to identify the distal end of the OTW lumen.

    FDA Enforcement
    Class I ·Terminated·Vascular Solutions, Inc.·October 26, 2016

    Vascular Solutions Twin-Pass RX Dual Access Catheter, model 5210. Sterilized with Ethylene Oxide. The Twin-Pass dual access catheter is a dual lumen catheter designed for use in the coronary and/or peripheral vasculature. The Twin-Pass catheter (Models 5200 and 5230) consists of an over-the-wire (OTW) lumen that runs the length of the catheter and a rapid exchange (RX) delivery lumen on the distal segment. The Twin-Pass catheter has a working length of 135cm and is compatible with various guidewire diameters. Model 5200 also has hydrophilic coating on the distal 18cm of the catheter. The Twin-Pass catheter has white positioning marks located at 95cm (single mark) and 105cm (double marks) from the distal tip, respectively. The Twin-Pass catheter has a marker band located 1mm from the distal tip. Model 5200 contains a second marker band located 11mm from the distal tip to identify the distal end of the OTW lumen.

    FDA Enforcement
    Class I ·Terminated·Vascular Solutions, Inc.·October 26, 2016

    50 mm Screw, Item #BG7050 Product Usage: Spinal Solutions distributes a variety of spinal fixation devices in loaner bins or on consignment. The company has decided to provide directions for use and surgical techniques electronically on the companys website. The company has created a label intended to inform the user of the existence of the websites and the information it contains. Indications for use: multiple.

    FDA Enforcement
    Class II ·Terminated·Spinal Solutions, LLC·June 5, 2013