6 results
·
7ms
·
Sources: EU EUDAMED, US FDA
ANSPACH***1.85mm x 16 mm Fluted Router for MRI***Rx Only*** This device is intended to be used with Anspach Systems
FDA Enforcement
Class II
·Terminated·The Anspach Effort, Inc.·July 2, 2014
The Trilogy Acetabular System Shell with Cluster Holes Porous 56 mm O.D. Sterile The Trilogy Acetabular System is indicated for either cemented or uncemented use In skeletally mature Individuals undergoing primary or revision surgery for rehabilitating hips damaged as a result of noninflammatory degenerative joint disease (NIDJD) or its composite diagnoses of osteoarthritis, avascular necrosis, protrusio acetabuli, traumatic arthritis, slipped capital epiphysis, fused Hip, fracture of the pelvis, and diastrophic variant. The shells with screw holes permit the use of titanium alloy screws to provide additional fixation and security, particularly in those cases where acetabular bone stock is deficient.
FDA Enforcement
Class II
·Terminated·Zimmer, Inc.·November 28, 2012
iCT SP (Uninterruptible Power Supply (UPS) accessory devices) Computed Tomography X-ray systems and Diagnostic Imaging systems.
FDA Enforcement
Class II
·Terminated·Philips Medical Systems (Cleveland) Inc·June 17, 2015
Brilliance iCT and Brilliance iCT SP These systems are intended to produce cross-sectional images of the body by computer reconstruction of x-ray transmission data taken at different angles and planes. May include signal analysis and display equipment, patient and equipment supports, components and accessories
FDA Enforcement
Class II
·Terminated·Philips Medical Systems (Cleveland) Inc·February 5, 2014
Medrad Continuum MR Infusion system- non-wireless system The MEDRAD Continuum MR Infusion System is designed for patients who require medications and other fluids during an MR procedure. It is intended to provide infusion therapy directly prior to, during and immediately after the MR procedure functioning while either stationary or mobile. It is not intended to provide long-term patient care outside the MR environment. The system is to be used by trained medical staff, primarily critical care, emergency room and radiology nursing staff.
FDA Enforcement
Class II
·Terminated·Bayer Corp·June 11, 2014
Stryker MA204 Bed Model (FL25E) Beds are intended for medical purposes in both general patient care as well as critical care environments. Each uses built-in electric motors and controls which can be operated by the patient, or caregiver, to adjust the height and/or surface contour of the bed.The devices listed above also include movable and latchable side rails which can be lowered or raised to help prevent patient fall and subsequent injury. The Beds include an optional Scale (Models: FL20E, FL25E, FL28C, FL28EX) as well as an optional Bed Exit (1 Zone) or Chaperone
FDA Enforcement
Class II
·Terminated·Stryker Medical Division of Stryker Corporation·July 4, 2012