5 results
·
18ms
·
Sources: EU EUDAMED, US FDA
Filters
FDA Enforcement
×
BIOMET 3i, PROVIDE PROTECTION CAP, Catalog # PPC484, PPC485, PPC654, and PPC655 BIOMET 3i Restorative Products are intended for use as an accessory to endosseous dental implants for placement in the maxilla and mandible. Provisional Abutments are intended for use as an accessory to endosseous dental implants to support a prosthetic device in a partially or fully edentulous patient. They are intended for use to support a prosthesis in the mandible or maxilla for up to 180 days during endosseous and gingival healing, and are for non-occlusal loading of provisional restorations.
FDA Enforcement
Class II
·Terminated·Biomet 3i, LLC·January 13, 2016
Zeiss brand IOLMaster 500, Model 500, Biomicroscope, Slit-Lamp, AC-Powered, Product is manufactured by Carl Zeiss Meditec AG (Jena), Carl Zeiss Promenade 10, Jena, Germany 07745; and distributed by Carl Zeiss Meditec, Inc., Dublin, CA This device is intended for use primarily by physicians and health care workers and may be only used under the supervision of a physician. This device will not be sold to the general public. The IOLMaster is intended for the biometric determination of ocular measurements of axial length, anterior chamber depth, corneal radius, white-to white (WTW), and for the measurement of pupil size and deviation of the visual axis from the center of the pupil. For patients who are candidates for intraocular lens (IOL) implantation, the device also performs calculations to assist physicians in determining the appropriate IOL power and type for implantation
FDA Enforcement
Class II
·Terminated·Carl Zeiss Meditec, Inc.·November 27, 2013
IOL Master 500: Software versions 7.5 and 7.7; Ophthalmic: IOL Master 500 is intended for biometric determination of ocular measurements of axial length, anterior chamber depth, corneal radius, white-to white (WTW), and for the measurement of pupil size and deviation of the visual axis from the center of the pupil.
FDA Enforcement
Class II
·Terminated·Carl Zeiss Meditec AG·December 9, 2015
Stryker MA204 Bed Model (FL25E) Beds are intended for medical purposes in both general patient care as well as critical care environments. Each uses built-in electric motors and controls which can be operated by the patient, or caregiver, to adjust the height and/or surface contour of the bed.The devices listed above also include movable and latchable side rails which can be lowered or raised to help prevent patient fall and subsequent injury. The Beds include an optional Scale (Models: FL20E, FL25E, FL28C, FL28EX) as well as an optional Bed Exit (1 Zone) or Chaperone
FDA Enforcement
Class II
·Terminated·Stryker Medical Division of Stryker Corporation·July 4, 2012
Alaris Syringe Pump, Model No. 8110. Delivers fluids. Expansion of Affected Units: BOM Housing Assembly Service, Part No. 49000226, and Lower Housing/Carriage Block Assembly, Part No. 148188-100.
FDA Enforcement
Class I
·Terminated·CareFusion 303, Inc.·August 26, 2015