Eclipse

Basic Information

• Brand Name: Eclipse
• Primary DI: M9701500020000
• Version / Model: 1500-02-000
• Company Name: Medshape, Inc.
• Labeler DUNS: 601306413
• Distribution Status: In Commercial Distribution
• Device Count in Pkg: 1
• Record Status: Published
• Publish Date: 2017-05-19
• Public Version: 7
• Public Version Date: 2024-02-19
• Public Version Status: Update
• Public Device Record Key: 70470588-04a1-46f5-bba3-09b0fa897984

Device Description

Universal Tenodesis Disposable Procedure Pack

Device Characteristics

• Single Use: Yes
• Prescription Use (Rx): Yes
• Over the Counter (OTC): No
• Kit: Yes
• Combination Product: No
• HCT/P: No
• Contains NRL: No
• Not Made with NRL: No
• MRI Safety: Labeling does not contain MRI Safety Information
• Direct Marking Exempt: No
• PM Exempt: Yes
• Has Serial Number: No
• Has Lot/Batch Number: Yes
• Has Manufacturing Date: No
• Has Expiration Date: Yes
• Has Donation ID: No

Sterilization

• Is Sterile: Yes
• Sterilization Prior Use: No

Product Codes

Code	Name	Medical Specialty	Regulation #	Device Class
KDD	Kit, Surgical Instrument, Disposable	General, Plastic Surgery	878.4800	1

GMDN Terms

Code	Name	Definition	Implantable	Status
35685	Orthopaedic bone wire	A wire intended for the fixation of bone fractures that may be implanted or used short-term (e.g., to hold a plate in the correct position during an intervention). It may be used: 1) as a cerclage wire to aid bone fixation; 2) in a loop or figure-of-eight configuration to reattach, e.g., the tip of the elbow (olecranon), tibial tubercle, or greater trochanter; 3) to augment bone screw/plate fixation; or 4) as a Kirschner wire or K-Wire to stiffen (arthrodese) a toe or finger. It is made of metal [e.g., stainless steel, cobalt-chrome (Co-Cr)], and may be malleable or rigid; some types include a nut designed to be attached to the wire to prevent wire migration. This is a single-use device.	No	Obsolete
57874	Suturing unit, single-use	A non-powered, hand-held device intended to pass sutures or a needle/suture assembly through tissues/prosthetic materials to facilitate suturing during an endoscopic and/or open surgical procedure; it may also knot, cut and/or tighten the sutures/ligature loop during or after placement. It typically consists of a shaft with hooks, catches, clasps, or forceps-like jaws at the distal end, and a proximal handle with controls. It typically has a pointed/cutting component to create a suture tunnel, and is loaded with the sutures or the suture is inserted through the shaft. This is a single-use device.	No	Active
45717	Suture knot pusher, single-use	A hand-held manual surgical instrument that enables the user performing an internal suturing procedure (e.g., suturing a heart valve in the thoracic cavity) to advance suture knots created extracorporeally to the point of appropriate suture tension. It is a long, thin, rod-like device that has a guiding mechanism (e.g., an eyelet or groove) at its distal end, allowing it to be steered down one end of the suture as it pushes the knot with its blunted nose. Saline may be used to lubricate the suture and the knot pusher if necessary. This is a single-use device.	No	Active
44877	Ligament graft sizer, noninvasive	A surgical instrument that contains a series of holes of varying dimensions/sizes intended to be used in orthopaedic surgery [e.g., in anterior cruciate ligament (ACL) reconstruction surgery] to measure the size/diameter of a harvested graft to be implanted. It is used ex vivo [e.g., on the preparation table of the operating room (OR)] on a harvested graft. The measurement is subsequently used to determine the diameter of the tunnel drilled into the operative site (e.g., distal femur) for acceptance of the new graft. This is a reusable device.	No	Active

Identifiers

Type	ID	Issuing Agency	Package Type	Qty per Pkg	Pkg Status	Pkg Discontinue Date
Primary	M9701500020000	HIBCC