Neuro & Craniofacial Fixation System

Basic Information

• Brand Name: Neuro & Craniofacial Fixation System
• Primary DI: M711CR16050
• Version / Model: CR1605
• Company Name: Innovasis, Inc.
• Labeler DUNS: 156567492
• Distribution Status: In Commercial Distribution
• Device Count in Pkg: 1
• Record Status: Published
• Publish Date: 2017-07-31
• Public Version: 6
• Public Version Date: 2024-02-19
• Public Version Status: Update
• Public Device Record Key: a5cdf771-7e37-4188-8ec8-059327c1085c

Device Description

Ti 6Al 4V (ELI)

Device Characteristics

• Single Use: Yes
• Prescription Use (Rx): Yes
• Over the Counter (OTC): No
• Kit: No
• Combination Product: No
• HCT/P: No
• Contains NRL: No
• Not Made with NRL: No
• MRI Safety: Labeling does not contain MRI Safety Information
• Direct Marking Exempt: Yes
• PM Exempt: No
• Has Serial Number: No
• Has Lot/Batch Number: Yes
• Has Manufacturing Date: No
• Has Expiration Date: No
• Has Donation ID: No

Sterilization

• Is Sterile: No
• Sterilization Prior Use: Yes
• Sterilization Methods: Moist Heat or Steam Sterilization

Product Codes

Code	Name	Medical Specialty	Regulation #	Device Class
HWC	Screw, Fixation, Bone	Orthopedic	888.3040	2

GMDN Terms

Code	Name	Definition	Implantable	Status
46879	Cranioplasty plate screw	A small, threaded rod with a slotted head designed to fasten skull plates (i.e., plates with a central convex curvature matching the curvature of the forehead, side, or rear areas of the human adult) to the intact cranial bones. It is typically made of metal [e.g., stainless steel, titanium (Ti)] and has a length and diameter appropriate to match the plate holes and the cranial bones. It is used mainly in neurosurgical procedures intended to fix cranioplasty plates used to repair defects created or caused by injury, surgical intervention for tumour removal, or congenital anomaly or disease.	No	Obsolete
46642	Craniofacial fixation plate, non-bioabsorbable, non-customized	A small, implantable, non-customized sheet of firm material designed to be attached with screws to craniofacial bone (including the maxilla and/or mandible) to bridge and stabilize a fracture gap or craniotomy flap, and/or cover a burr hole. It is made of non-bioabsorbable materials (e.g., surgical steel, titanium alloy) and is available in a variety of designs (e.g., Y-plate, curved plate, mesh-panel, burr hole cover). Instruments intended to facilitate implantation (e.g., driver), or plate fixation implants (i.e., bone screws), may be included with the plate.	Yes	Active

Identifiers

Type	ID	Issuing Agency	Package Type	Qty per Pkg	Pkg Status	Pkg Discontinue Date
Primary	M711CR16050	HIBCC

Customer Contacts

• Phone: [phone]
• Email: [email protected]

Premarket Submissions

Submission Number	Supplement Number
K091686	000

Device Sizes

Type	Value	Unit	Text
Outer Diameter	1.6	Millimeter
Length	5	Millimeter