Neuro & Craniofacial Fixation System

Basic Information

• Brand Name: Neuro & Craniofacial Fixation System
• Primary DI: M711CR010GP0
• Version / Model: CR010GP
• Company Name: Innovasis, Inc.
• Labeler DUNS: 156567492
• Distribution Status: In Commercial Distribution
• Device Count in Pkg: 1
• Record Status: Published
• Publish Date: 2017-07-31
• Public Version: 5
• Public Version Date: 2023-09-18
• Public Version Status: Update
• Public Device Record Key: 25896245-b3cc-4f4d-acd5-742b47dd8067

Device Description

CP Ti

Device Characteristics

• Single Use: Yes
• Prescription Use (Rx): Yes
• Over the Counter (OTC): No
• Kit: No
• Combination Product: No
• HCT/P: No
• Contains NRL: No
• Not Made with NRL: No
• MRI Safety: Labeling does not contain MRI Safety Information
• Direct Marking Exempt: Yes
• PM Exempt: No
• Has Serial Number: No
• Has Lot/Batch Number: Yes
• Has Manufacturing Date: No
• Has Expiration Date: No
• Has Donation ID: No

Sterilization

• Is Sterile: No
• Sterilization Prior Use: Yes
• Sterilization Methods: Moist Heat or Steam Sterilization

Product Codes

Code	Name	Medical Specialty	Regulation #	Device Class
JEY	Plate, Bone	Dental	872.4760	2

GMDN Terms

Code	Name	Definition	Implantable	Status
46267	Cranioplasty plate, alterable	An implantable shield designed to repair larger skull defects that is preformed before surgery and typically made of sheets of material (e.g., tantalum) that can be reshaped at the time of surgery without changing the physical or chemical properties of the material. The device is generally preformed with a central convex curvature matching the curvature of the forehead, side, or rear areas of the human adult skull; it is usually fixed to the intact cranial bones using screws and/or other fasteners. The device is used to repair defects due to injury, surgical intervention for tumour removal, congenital anomaly, or disease.	Yes	Active
46642	Craniofacial fixation plate, non-bioabsorbable, non-customized	A small, implantable, non-customized sheet of firm material designed to be attached with screws to craniofacial bone (including the maxilla and/or mandible) to bridge and stabilize a fracture gap or craniotomy flap, and/or cover a burr hole. It is made of non-bioabsorbable materials (e.g., surgical steel, titanium alloy) and is available in a variety of designs (e.g., Y-plate, curved plate, mesh-panel, burr hole cover). Instruments intended to facilitate implantation (e.g., driver), or plate fixation implants (i.e., bone screws), may be included with the plate.	Yes	Active

Identifiers

Type	ID	Issuing Agency	Package Type	Qty per Pkg	Pkg Status	Pkg Discontinue Date
Primary	M711CR010GP0	HIBCC

Customer Contacts

• Phone: [phone]
• Email: [email protected]

Premarket Submissions

Submission Number	Supplement Number
K091679	000

Device Sizes

Type	Value	Unit	Text
Length	29	Millimeter