Lambotte Osteotomes Straight 38mm

Basic Information

• Brand Name: Lambotte Osteotomes Straight 38mm
• Primary DI: G25012191240
• Version / Model: 12-191-24
• Catalog Number: 12-191-24
• Company Name: N S SURGICAL COMPANY
• Labeler DUNS: 645681649
• Distribution Status: In Commercial Distribution
• Device Count in Pkg: 1
• Record Status: Published
• Publish Date: 2023-09-02
• Public Version: 1
• Public Version Date: 2023-09-11
• Public Version Status: New
• Public Device Record Key: 1c585bec-21bd-427b-8af1-6f6e7250a525

Device Description

A chisel-like, one-piece manual surgical instrument designed to cut and/or shape bone by percussion during an orthopaedic procedure. It is hand-held by the operator who uses a surgical mallet or hammer to manually impart a force to the proximal end of the instrument. The distal end (the cutting or shaping edge) is sharp, often flat, but can be curved (concave) in design, and is typically bevelled on both sides with sloping curves. It is either entirely made of metal (e.g., high-grade stainless steel) or has a metal blade with a handle made of synthetic material (e.g., Tufnol). This is a reusable device.

Device Characteristics

• Single Use: Yes
• Prescription Use (Rx): Yes
• Over the Counter (OTC): Yes
• Kit: No
• Combination Product: No
• HCT/P: No
• Contains NRL: No
• Not Made with NRL: No
• MRI Safety: Labeling does not contain MRI Safety Information
• Direct Marking Exempt: No
• PM Exempt: Yes
• Has Serial Number: No
• Has Lot/Batch Number: Yes
• Has Manufacturing Date: Yes
• Has Expiration Date: No
• Has Donation ID: No

Sterilization

• Is Sterile: No
• Sterilization Prior Use: Yes
• Sterilization Methods: ["Ethylene Oxide", "Moist Heat or Steam Sterilization", "Ultraviolet Light"]

Product Codes

Code	Name	Medical Specialty	Regulation #	Device Class
HWM	Osteotome	General, Plastic Surgery	878.4800	1

GMDN Terms

Code	Name	Definition	Implantable	Status
12844	Orthopaedic osteotome	A chisel-like, one-piece manual surgical instrument designed to cut and/or shape bone by percussion during an orthopaedic procedure. It is hand-held by the operator who uses a surgical mallet or hammer to manually impart a force to the proximal end of the instrument. The distal end (the cutting or shaping edge) is sharp, often flat, but can be curved (concave) in design, and is typically bevelled on both sides with sloping curves. It is either entirely made of metal (e.g., high-grade stainless steel) or has a metal blade with a handle made of synthetic material (e.g., Tufnol). This is a reusable device.	No	Active

Identifiers

Type	ID	Issuing Agency	Package Type	Qty per Pkg	Pkg Status	Pkg Discontinue Date
Primary	G25012191240	HIBCC

Device Sizes

Type	Value	Unit	Text
Length	24.5	Centimeter