BioStamp nPoint™

Basic Information

• Brand Name: BioStamp nPoint™
• Primary DI: G012BRCP01
• Version / Model: BRCP01
• Company Name: Medidata Solutions, Inc.
• Labeler DUNS: 840371087
• Distribution Status: In Commercial Distribution
• Device Count in Pkg: 1
• Record Status: Published
• Publish Date: 2021-04-01
• Public Version: 1
• Public Version Date: 2021-04-09
• Public Version Status: New
• Public Device Record Key: 09841c62-5966-4293-9888-bdf460b88a23

Device Description

Mobile application phone

Device Characteristics

• Single Use: No
• Prescription Use (Rx): Yes
• Over the Counter (OTC): No
• Kit: No
• Combination Product: No
• HCT/P: No
• Contains NRL: No
• Not Made with NRL: Yes
• MRI Safety: Labeling does not contain MRI Safety Information
• Direct Marking Exempt: No
• PM Exempt: No
• Has Serial Number: Yes
• Has Lot/Batch Number: No
• Has Manufacturing Date: No
• Has Expiration Date: Yes
• Has Donation ID: No

Sterilization

• Is Sterile: No
• Sterilization Prior Use: No

Product Codes

Code	Name	Medical Specialty	Regulation #	Device Class
MWI	Monitor, Physiological, Patient (Without Arrhythmia Detection Or Alarms)	Cardiovascular	870.2300	2
LEL	Device, Sleep Assessment	Neurology	882.5050	2
IKN	Electromyograph, Diagnostic	Physical Medicine	890.1375	2
DRG	Transmitters And Receivers, Physiological Signal, Radiofrequency	Cardiovascular	870.2910	2

GMDN Terms

Code	Name	Definition	Implantable	Status
36252	Kinesiology ambulatory recorder	A battery-powered device designed to continuously measure and record a patient's kinetic activity during routine ambulation, including monitoring the motion of individual joints/limbs, typically to assess joint mobility, gait performance, and fall-risk or frailty (e.g., during post-surgery rehabilitation). It consists of a motion sensor(s) worn on the torso or a limb (e.g., thigh, calf, wrist, ankle) while performing normal daily activities, and a computing device/software to which body movement signals are transmitted for recording/analysis; it may also be attached to or integrated in an external limb prosthesis for activity monitoring.	No	Active
36367	Electrocardiography telemetric monitoring system transmitter	A body-worn, battery-powered component of an electrocardiography telemetric monitoring system designed to continuously measure and wirelessly transmit real-time electrocardiographic (ECG) signals [and sometimes additional parameters such as heart rate, skin temperature, or haemoglobin oxygen saturation (SpO2)] to a remote receiver (e.g., central station server); it may in addition record/analyse data during a period of time for later retrieval (Holter reporting). The transmitter typically includes an antenna and attached sensors (e.g., leads and electrodes) that are connected to the patient, and may be provided with dedicated data management/communication software. This is a reusable device.	No	Obsolete
38443	Electromyography telemetric monitoring system transmitter	A body-worn, battery-powered component of an electromyography telemetric monitoring system designed to continuously measure and wirelessly transmit electromyographic (EMG) signals to the system's receiver. The transmitter typically includes an antenna and attached sensors (e.g., lead wires and electrodes) that are connected to the patient. This is a reusable device.	No	Obsolete
47505	Intra-abdominal pressure measurement set, mechanical	A collection of devices designed to measure intra-abdominal pressure (IAP) through the bladder. It typically includes a tube with graduated markings in mm Hg (manometer tube), clamps, a filter, and a urine collection bag. The assembled device is connected to an indwelling urethral catheter (Foley), and IAP is measured by the manometer tube based on urine level in the tube. It is typically used to measure IAP in patients at risk of intra-abdominal hypertension (IAH) such as following abdominal surgery, abdominal trauma, ventilated patients with organ dysfunction, and patients suspected of abdominal compartment syndrome (ACS). This is a single-use device.	No	Active
63313	Kinesiology/electromyographic sensor set	A collection of patient-worn devices consisting of both an electromyographic sensor and motion-based sensor intended to be used in a clinical setting as part of a system (e.g., virtual-display rehabilitation system, biomechanical analysis system) to provide non-gravity-compensating analysis, biofeedback, and/or interactive rehabilitation of neuromuscular/musculoskeletal conditions. It is typically intended to be used with a computer, interface devices, and software (not included).	No	Active

Identifiers

Type	ID	Issuing Agency	Package Type	Qty per Pkg	Pkg Status	Pkg Discontinue Date
Primary	G012BRCP01	HIBCC
Previous	B493BRCP01	HIBCC

Customer Contacts

• Phone: [phone]
• Email: [email protected]

Premarket Submissions

Submission Number	Supplement Number
K173510	000

Storage Conditions

• Type: Storage Environment Humidity
• Temperature Range: 40 – 60 Percent (%) Relative Humidity
• Type: Storage Environment Temperature
• Temperature Range: 15 – 30 Degrees Celsius