FDA UDI
In Commercial Distribution
🇺🇸 United States
FuturAcryl 2000 Pink veined
DI: ESDG6505141
·
Model: 650514
·
Schütz Dental GmbH
Product Codes
1
GMDN Terms
1
Identifiers
1
Pkg Device Count
1
Basic Information
- Brand Name
- FuturAcryl 2000 Pink veined
- Primary DI
- ESDG6505141
- Version / Model
- 650514
- Company Name
- Schütz Dental GmbH
- Labeler DUNS
- 315830349
- Distribution Status
- In Commercial Distribution
- Device Count in Pkg
- 1
- Record Status
- Published
- Publish Date
- 2016-09-13
- Public Version
- 4
- Public Version Date
- 2021-11-10
- Public Version Status
- Update
- Public Device Record Key
- e27d7593-1b87-4982-869d-0297d34d1f1a
Device Description
Heat-curing, methyl methacrylate resin for fabricating partial and full dentures using flasks and clamps or injection moulding systems
Device Characteristics
- Single Use
- No
- Prescription Use (Rx)
- Yes
- Over the Counter (OTC)
- No
- Kit
- No
- Combination Product
- No
- HCT/P
- No
- Contains NRL
- No
- Not Made with NRL
- No
- MRI Safety
- Labeling does not contain MRI Safety Information
- Direct Marking Exempt
- No
- PM Exempt
- No
- Has Serial Number
- No
- Has Lot/Batch Number
- Yes
- Has Manufacturing Date
- No
- Has Expiration Date
- Yes
- Has Donation ID
- No
Sterilization
- Is Sterile
- No
- Sterilization Prior Use
- No
Product Codes
| Code | Name | Medical Specialty | Regulation # | Device Class |
|---|---|---|---|---|
| EBI | Resin, Denture, Relining, Repairing, Rebasing | Dental | 872.3760 | 2 |
GMDN Terms
| Code | Name | Definition | Implantable | Status |
|---|---|---|---|---|
| 16730 | Dental appliance fabrication material, resin | A resin intended to be used in the dental laboratory to manufacture a patient-worn dental prosthesis or appliance (e.g., denture base, occlusal splint/night guard), that either: 1) polymerizes under heat (heat-cured), light (light-cured), and/or after a period of time (self-cured); or 2) can be shaped by a dental mill [e.g., based on computer-aided design/computer-aided manufacturing (CAD/CAM) technology]. It may in addition be intended to fabricate non-patient-worn devices (e.g., drilling templates using 3-D printing). After application, this material cannot be refabricated. | No | Active |
Identifiers
| Type | ID | Issuing Agency | Package Type | Qty per Pkg | Pkg Status | Pkg Discontinue Date |
|---|---|---|---|---|---|---|
| Primary | ESDG6505141 | HIBCC |
Storage Conditions
- Type
- Storage Environment Temperature
- Temperature Range
- 10 – 25 Degrees Celsius