3Delta UNlimited

Basic Information

• Brand Name: 3Delta UNlimited
• Primary DI: EDEL16131300
• Version / Model: 1613130
• Catalog Number: 1613130
• Company Name: DeltaMed GmbH
• Labeler DUNS: 344805101
• Distribution Status: In Commercial Distribution
• Device Count in Pkg: 1
• Record Status: Published
• Publish Date: 2025-03-14
• Public Version: 1
• Public Version Date: 2025-03-24
• Public Version Status: New
• Public Device Record Key: 48597390-a785-42d3-8ae9-36c1da8fb202

Device Description

3Delta UNlimited A3 500g

Device Characteristics

• Single Use: Yes
• Prescription Use (Rx): Yes
• Over the Counter (OTC): No
• Kit: No
• Combination Product: No
• HCT/P: No
• Contains NRL: No
• Not Made with NRL: No
• MRI Safety: Labeling does not contain MRI Safety Information
• Direct Marking Exempt: No
• PM Exempt: No
• Has Serial Number: No
• Has Lot/Batch Number: Yes
• Has Manufacturing Date: No
• Has Expiration Date: Yes
• Has Donation ID: No

Sterilization

• Is Sterile: No
• Sterilization Prior Use: No

Product Codes

Code	Name	Medical Specialty	Regulation #	Device Class
EBF	Material, Tooth Shade, Resin	Dental	872.3690	2
EBI	Resin, Denture, Relining, Repairing, Rebasing	Dental	872.3760	2
EBG	Crown And Bridge, Temporary, Resin	Dental	872.3770	2
PZY	Additively Manufactured, Preformed, Resin Denture Tooth	Dental	872.3590	2

GMDN Terms

Code	Name	Definition	Implantable	Status
16730	Dental appliance fabrication material, resin	A resin intended to be used in the dental laboratory to manufacture a patient-worn dental prosthesis or appliance (e.g., denture base, occlusal splint/night guard), that either: 1) polymerizes under heat (heat-cured), light (light-cured), and/or after a period of time (self-cured); or 2) can be shaped by a dental mill [e.g., based on computer-aided design/computer-aided manufacturing (CAD/CAM) technology]. It may in addition be intended to fabricate non-patient-worn devices (e.g., drilling templates using 3-D printing). After application, this material cannot be refabricated.	No	Active
38643	Resin artificial teeth	Prefabricated teeth made of polymer-based material for mounting on dentures. Teeth are normally delivered as sets of front teeth, upper or lower jaw, or sets of premolars and molars, upper or lower jaw, in various sizes, shapes and colours.	No	Active
45236	Temporary dental crown/bridge resin	A material [e.g., polymethylmethacrylate (PMMA)] intended to make a temporary crown or bridge prosthesis for use until a permanent restoration is fabricated.	No	Active
62817	Dental appliance fabrication material, combination-material	A dental material made of a combination of metal, ceramic, and/or synthetic polymer [e.g., polyethylene (PE)] intended to be used to manufacture a final dental prosthesis (e.g., a dental implant, removable dentures, crown, bridge) for patient use. It is used to create implantable and removable restorations using manual or computer-aided design/computer-aided manufacturing (CAD/CAM) technology. After application, this material cannot be reused for fabrication.	No	Active

Identifiers

Type	ID	Issuing Agency	Package Type	Qty per Pkg	Pkg Status	Pkg Discontinue Date
Primary	EDEL16131300	HIBCC

Premarket Submissions

Submission Number	Supplement Number
K243720	000

Storage Conditions

• Type: Special Storage Condition, Specify
• Special Conditions: avoid direct sunlight
• Type: Storage Environment Temperature
• Temperature Range: 4 – 25 Degrees Celsius