DD base P HI

Basic Information

• Brand Name: DD base P HI
• Primary DI: EDDIK503301
• Version / Model: 98H30 sun
• Catalog Number: K50330
• Company Name: Dental Direkt GmbH
• Labeler DUNS: 313214171
• Distribution Status: In Commercial Distribution
• Device Count in Pkg: 1
• Record Status: Published
• Publish Date: 2023-07-10
• Public Version: 2
• Public Version Date: 2025-12-08
• Public Version Status: Update
• Public Device Record Key: 2d8ce48d-4ecd-4665-b5d2-6a44f9779228

Device Description

DD medical polymers (PMMA), made from PMMA, are industrially polymerized, pre-colored or clear dental milling blanks designed for milled fabrication of bite splints (clear variant) or denture bases (gingiva-colored variants) on dental CAD/CAM systems. DD base P HI are pre-colored dental milling blanks made of impact-resistant PMMA for the manufacture of denture bases for removable dentures. DD base P HI is suitable for longterm use in the oral cavity up to 10 years.

Device Characteristics

• Single Use: Yes
• Prescription Use (Rx): Yes
• Over the Counter (OTC): No
• Kit: No
• Combination Product: No
• HCT/P: No
• Contains NRL: No
• Not Made with NRL: No
• MRI Safety: Labeling does not contain MRI Safety Information
• Direct Marking Exempt: No
• PM Exempt: No
• Has Serial Number: No
• Has Lot/Batch Number: Yes
• Has Manufacturing Date: Yes
• Has Expiration Date: Yes
• Has Donation ID: No

Sterilization

• Is Sterile: No
• Sterilization Prior Use: No

Product Codes

Code	Name	Medical Specialty	Regulation #	Device Class
EBI	Resin, Denture, Relining, Repairing, Rebasing	Dental	872.3760	2

GMDN Terms

Code	Name	Definition	Implantable	Status
58288	Dental appliance fabrication material, thermoplastic	A thermoplastic material intended to be used in the dental laboratory to manufacture a patient-worn dental appliance (e.g., denture/denture base, orthodontic retainer, implant bars, crowns/bridges, occlusal splint, mouthguard); it might in addition be intended to fabricate non-patient worn devices (e.g., dental impression tray). The material [e.g., nylon 12 beads, polyetheretherketone (PEEK) milling blank, thermoplastic sheet] is manipulated [e.g., by melting and moulding, or computer-aided techniques (dental CAD/CAM)] to form the shape needed for the patient. After application, this material cannot be refabricated.	No	Active

Identifiers

Type	ID	Issuing Agency	Package Type	Qty per Pkg	Pkg Status	Pkg Discontinue Date
Primary	EDDIK503301	HIBCC

Customer Contacts

• Phone: [phone]
• Email: [email protected]

Premarket Submissions

Submission Number	Supplement Number
K230410	000

Device Sizes

Type	Value	Unit	Text
Height	30	Millimeter
Outer Diameter	98.5	Millimeter