Recharge Kit, Straumann

Basic Information

• Brand Name: Recharge Kit, Straumann
• Primary DI: D990RKST0
• Version / Model: RK-ST
• Company Name: Smart Denture Conversions, LLC
• Labeler DUNS: 010613514
• Distribution Status: In Commercial Distribution
• Device Count in Pkg: 1
• Record Status: Published
• Publish Date: 2022-12-26
• Public Version: 1
• Public Version Date: 2023-01-03
• Public Version Status: New
• Public Device Record Key: 076f3ebe-bad8-476c-92f5-5909c18154ca

Device Characteristics

• Single Use: Yes
• Prescription Use (Rx): Yes
• Over the Counter (OTC): No
• Kit: No
• Combination Product: No
• HCT/P: No
• Contains NRL: No
• Not Made with NRL: No
• MRI Safety: Labeling does not contain MRI Safety Information
• Direct Marking Exempt: No
• PM Exempt: Yes
• Has Serial Number: No
• Has Lot/Batch Number: Yes
• Has Manufacturing Date: No
• Has Expiration Date: No
• Has Donation ID: No

Sterilization

• Is Sterile: No
• Sterilization Prior Use: Yes
• Sterilization Methods: Moist Heat or Steam Sterilization

Product Codes

Code	Name	Medical Specialty	Regulation #	Device Class
NDP	Accessories, Implant, Dental, Endosseous	Dental	872.3980	1
EJX	Anchor, Preformed	Dental	872.3130	1

GMDN Terms

Code	Name	Definition	Implantable	Status
16669	Steel dental bur, reusable	A rotary cutting device made from high-grade carbon steel with the working end typically formed with cutting planes, e.g., spiralled flutes, and which is designed to fit into a dental handpiece that provides the rotation allowing the user to cut hard structures in the mouth, such as teeth or bone. It can also be used to cut hard metals, plastics, porcelains and similar materials intended for use in the fabrication of dental devices. It is available in various shapes (e.g., cylinder, disk, sphere, oval). This is a reusable device.	No	Active
44880	Dental implant suprastructure, temporary, preformed, single-use	A prefabricated device intended to be used during dental implant restorative and laboratory procedures to provide a temporary intermediate fixture level between a dental implant and a temporary dental prosthesis/restoration, during the oral soft-tissue healing and sculpturing period, prior to the fabrication/rehabilitation and installation of the final prosthesis/restoration (e.g., bridge, single tooth, overdenture). It typically includes burnout/temporary cylinders, fixture impression pick-ups, replica devices, caps/cover screws in a variety of shapes, sizes, and materials [e.g., titanium (Ti), plastic]. This is a single-use device.	Yes	Active
61640	Dental implant abutment analog, laboratory	A rod-like device intended to be used as a copy of a dental implant abutment, for a dental laboratory working model, to confirm the orientation/position of the final dental implant; it may be used during a scanning procedure (e.g., with a laboratory scanner). This is a reusable device.	No	Active
61647	Dental prosthesis/implant abutment screw	A device intended to be used short- or long-term to attach a dental implant abutment and/or prosthesis (e.g., crown, bridge) to a dental implant during dental restorative procedures. It is made of metal [e.g., titanium (Ti)] and consists of a rod-like fastener inserted through the abutment/prosthesis. This is a single-use device.	Yes	Active
64312	Dental prosthesis/implant abutment screw analog, single-use	A device intended to be used as a copy of a dental implant prosthetic screw to attach a dental implant abutment or prosthesis (e.g., crown, bridge) to a dental implant analog in a dental laboratory working model. Some types are referred to as a guide pin, and may be used intraorally to attach an implant coping to the dental implant during an open-tray impression procedure. It is made of metal [e.g., titanium (Ti)] and consists of a rod-like fastener inserted through the abutment/prosthesis. This is a single-use device.	No	Active

Identifiers

Type	ID	Issuing Agency	Package Type	Qty per Pkg	Pkg Status	Pkg Discontinue Date
Primary	D990RKST0	HIBCC

Customer Contacts

• Phone: [phone]
• Email: [email protected]