Flotec

Basic Information

• Brand Name: Flotec
• Primary DI: B741MC0
• Version / Model: Mass Casualty Assembly
• Company Name: FLOTEC INC
• Labeler DUNS: 103643730
• Distribution Status: In Commercial Distribution
• Device Count in Pkg: 1
• Record Status: Published
• Publish Date: 2020-02-27
• Public Version: 4
• Public Version Date: 2023-02-20
• Public Version Status: Update
• Public Device Record Key: 9e53fe00-46d9-4731-bfda-7bc197c4c934

Device Characteristics

• Single Use: No
• Prescription Use (Rx): No
• Over the Counter (OTC): No
• Kit: No
• Combination Product: No
• HCT/P: No
• Contains NRL: No
• Not Made with NRL: No
• MRI Safety: MR Conditional
• Direct Marking Exempt: No
• PM Exempt: Yes
• Has Serial Number: No
• Has Lot/Batch Number: Yes
• Has Manufacturing Date: No
• Has Expiration Date: No
• Has Donation ID: No

Sterilization

• Is Sterile: No
• Sterilization Prior Use: No

Product Codes

Code	Name	Medical Specialty	Regulation #	Device Class
BYX	Tubing, Pressure And Accessories	Anesthesiology	868.5860	1

GMDN Terms

Code	Name	Definition	Implantable	Status
14239	High-pressure medical gas hose	A length of flexible tube intended to deliver and withstand gases under very high pressure, e.g., greater than 200 bar/3000 pounds per square inch (psi). It may be composed of any of several malleable or semi-rigid materials (e.g., plastic, rubber, or nylon), and braided with cotton wool and/or stainless steel. It is typically used to transport high pressure compressed medical gas to a pressure regulating device. It is available in various lengths, including standard coil lengths. This is a reusable device.	No	Active
43438	Non-fixed medical gas cylinder regulator	A reduction valve designed to be attached through a gastight connector (e.g., a pin-index or bull-nosed screw thread connection) to the valve stem of a medical gas (e.g., carbon dioxide, oxygen, nitrous oxide, gas mixture) cylinder to reduce high, variable gas pressure to a lower, constant working pressure (excludes procedure-dedicated valves). It can be a single or a dual stage regulator, usually of a piston or diaphragm design. It will have a safety relief valve to avoid excessive pressure due to increased ambient temperatures, and it may have associated devices (e.g., a manometer, flowmeter) to display the available gas reserve of a gas cylinder, the working pressure and/or the flow rate.	No	Active
61366	Medical gas flowmeter, dial-type	A device intended to regulate the flow of a medical gas [e.g., oxygen (O2), carbon dioxide (CO2), nitrous oxide (N2O), helium/oxygen gas mixture (heliox), medical air] during various procedures (e.g., therapeutic administration, anaesthesia, insufflation during surgery). It has a pre-calibrated adjustable flow selection dial intended to control the gas flow rate; it is not intended to provide flow rate measurements. It will be calibrated to a specific medical gas and have a dedicated flow rate range, therefore some types may be dedicated to a specific patient group (e.g., neonate, infant, adult) or clinical use.	No	Active

Identifiers

Type	ID	Issuing Agency	Package Type	Qty per Pkg	Pkg Status	Pkg Discontinue Date
Primary	B741MC0	HIBCC

Customer Contacts

• Phone: [phone]
• Email: [email protected]