FDA UDI
In Commercial Distribution
🇺🇸 United States
Diamond Orthopedic
DI: B551DMDKIT150T10S0
·
Model: DMD-KIT-150T10-S
·
DIAMOND ORTHOPEDIC, LLC
Product Codes
4
GMDN Terms
4
Identifiers
1
Pkg Device Count
1
Basic Information
- Brand Name
- Diamond Orthopedic
- Primary DI
- B551DMDKIT150T10S0
- Version / Model
- DMD-KIT-150T10-S
- Catalog Number
- DMD-KIT-150T10-S
- Company Name
- DIAMOND ORTHOPEDIC, LLC
- Labeler DUNS
- 080596041
- Distribution Status
- In Commercial Distribution
- Device Count in Pkg
- 1
- Record Status
- Published
- Publish Date
- 2023-11-02
- Public Version
- 1
- Public Version Date
- 2023-11-10
- Public Version Status
- New
- Public Device Record Key
- 3af2e14d-2d9c-412f-b024-efd9cab8ed3e
Device Description
Single-Use Instrumentation Kit, T10
Device Characteristics
- Single Use
- Yes
- Prescription Use (Rx)
- No
- Over the Counter (OTC)
- No
- Kit
- Yes
- Combination Product
- No
- HCT/P
- No
- Contains NRL
- No
- Not Made with NRL
- No
- MRI Safety
- Labeling does not contain MRI Safety Information
- Direct Marking Exempt
- No
- PM Exempt
- Yes
- Has Serial Number
- No
- Has Lot/Batch Number
- Yes
- Has Manufacturing Date
- Yes
- Has Expiration Date
- Yes
- Has Donation ID
- No
Sterilization
- Is Sterile
- Yes
- Sterilization Prior Use
- No
Product Codes
| Code | Name | Medical Specialty | Regulation # | Device Class |
|---|---|---|---|---|
| HTY | Pin, Fixation, Smooth | Orthopedic | 888.3040 | 2 |
| HTW | Bit, Drill | Orthopedic | 888.4540 | 1 |
| HXX | Screwdriver | Orthopedic | 888.4540 | 1 |
| HTJ | Gauge, Depth | Orthopedic | 888.4300 | 1 |
GMDN Terms
| Code | Name | Definition | Implantable | Status |
|---|---|---|---|---|
| 32854 | Orthopaedic bone pin, non-bioabsorbable | A thin, implantable rod intended to be used for the stabilization of a bone fracture or bone grafts, or for an osteotomy or arthrodesis. It is typically drilled into bone and may be smooth or threaded, solid or cannulated, and/or semi-flexible. Also known as a K-Wire, it may in addition be intended to assist with the introduction of a surgical instrument and/or implant; it is not intended for implantation into the intramedullary canal (i.e., not a nail). It is made of a material that is not chemically degraded or absorbed by natural body processes (e.g., stainless steel). Some designs may have a break-off shank and/or be coated to improve long-term fixation. This is a single-use device. | Yes | Active |
| 61235 | Cannulated surgical drill bit, single-use | A metal shaft intended to be mounted into an appropriate surgical power tool (e.g., a pneumatic reamer or drilling system handpiece with appropriate torque capacity) and rotated to bore into hard/tough tissues (e.g., bone, cartilage) in order to clear a channel of the same diameter as the shaft, typically for the insertion of a prosthetic device or other orthopaedic implant. It has a hollow centre so it can be fed over a drill guiding pin, and may be flexible; devices to assist the procedure (e.g., drill guiding pin, manual driver) may be included. This is a single-use device. | No | Active |
| 58776 | Surgical screwdriver, single-use | A non-powered tool that fits into a screw head in order to apply rotation to tighten/loosen/remove a screw during a surgical procedure. It typically has a high-grade stainless steel shaft with a distal end dedicated to fit into a screw head that may be slotted, Phillips (cross head), Pozidriv (Supadriv), Torx, Hex (Allen), Robertson (square), spanner head (twin pins), Polydrive, or one-way (clutch). The proximal end of the shaft may have a handle for manual use, or it may have a profiled tang that fits into an interchangeable screwdriver handle, a manually-operated chuck, or a power driver. This is a single-use device. | No | Active |
| 58796 | Surgical depth gauge, single-use | A surgical instrument designed to measure the depth of a recess, usually to measure the depth of holes being drilled in bone to determine the length of the bone screw to be used. It may take the form of: 1) a device with a moveable (sliding) centrepiece (a prong), the tip of which is inserted into the recess to read from a scale; 2) a circular disc with a central hole which is clipped to a drill bit so that the device slides up as the drill bit is advanced; or 3) a cylindrical rod with markings. This is a single-use device. | No | Active |
Identifiers
| Type | ID | Issuing Agency | Package Type | Qty per Pkg | Pkg Status | Pkg Discontinue Date |
|---|---|---|---|---|---|---|
| Primary | B551DMDKIT150T10S0 | HIBCC |
Customer Contacts
- Phone
- 704-585-8270
- [email protected]