CS 9000C 3D

Basic Information

• Brand Name: CS 9000C 3D
• Primary DI: 60889975159010
• Version / Model: CS 9000C 3D
• Catalog Number: 5159017
• Company Name: CARESTREAM HEALTH, INC.
• Labeler DUNS: 793169512
• Distribution Status: In Commercial Distribution
• Device Count in Pkg: 1
• Record Status: Published
• Publish Date: 2016-09-16
• Public Version: 2
• Public Version Date: 2018-03-29
• Public Version Status: Update
• Public Device Record Key: 97a3a097-5cab-41ee-8a54-1516acabba22

Device Description

CS 9000C 3D 110V

Device Characteristics

• Single Use: No
• Prescription Use (Rx): Yes
• Over the Counter (OTC): No
• Kit: No
• Combination Product: No
• HCT/P: No
• Contains NRL: No
• Not Made with NRL: No
• MRI Safety: Labeling does not contain MRI Safety Information
• Direct Marking Exempt: No
• PM Exempt: No
• Has Serial Number: Yes
• Has Lot/Batch Number: No
• Has Manufacturing Date: No
• Has Expiration Date: No
• Has Donation ID: No

Sterilization

• Is Sterile: No
• Sterilization Prior Use: No

Product Codes

Code	Name	Medical Specialty	Regulation #	Device Class
OAS	X-ray, tomography, computed, dental	Radiology	892.1750	2
MUH	System,x-ray,extraoral source,digital	Dental	872.1800	2

GMDN Terms

Code	Name	Definition	Implantable	Status
43620	Stationary cephalometric x-ray system, digital	A stationary cephalometric x-ray system designed to generate and control x-ray beams and to record the absorption patterns of x-rays passing through a patient's head (skull). It is used for: 1) radiographic visualization and measurement of the dimensions of the human head, e.g., abnormal structures of the skull; 2) orthodontic assessment of the relationship of the teeth to the jaws and the jaws to the rest of the facial skeleton; 3) assessment airway and other soft tissue structures. The sensor is placed outside the head. The data is either from analogue imaging and digitized afterwards or by digital imaging.	No	Active
45855	Stationary extraoral dental x-ray system, digital	A diagnostic dental x-ray system designed for permanent fixture in one location to generate and control x-ray beams. It records the absorption pattern of x-ray beams used for general-purpose, routine, dental radiography examinations involving the diagnosis and treatment (e.g., surgical or interventional) of diseases of the teeth, jaw and oral cavity structures. The sensor is placed outside the mouth, the purpose being to visualize the entire mouth area showing teeth on both the upper and lower jaws. The data is either from analogue imaging and digitized afterwards or by digital imaging.	No	Active
61019	Cone beam computed tomography system, head/neck	A stationary assembly of mains electricity (AC-powered) devices intended to produce two- or three-dimensional (3-D) diagnostic digital x-ray images of the head/neck using cone beam computed tomography (CBCT). It consists of an x-ray source assembly, high-voltage generator, x-ray detector, processor, reconstruction software, and patient support device (e.g., seat, stabilizing bite block); the patient is typically scanned in an upright position by a rotating arm. It is typically intended for (but not limited to) dental and ear/nose/throat (ENT) applications.	No	Active

Identifiers

Type	ID	Issuing Agency	Package Type	Qty per Pkg	Pkg Status	Pkg Discontinue Date
Primary	60889975159010	GS1