CS 8100SC 3D Access

Basic Information

• Brand Name: CS 8100SC 3D Access
• Primary DI: 60192155500237
• Version / Model: CS 8100SC 3D Access
• Catalog Number: 5500236
• Company Name: CARESTREAM DENTAL LLC
• Labeler DUNS: 019796106
• Distribution Status: In Commercial Distribution
• Device Count in Pkg: 1
• Record Status: Published
• Publish Date: 2018-01-15
• Public Version: 5
• Public Version Date: 2019-10-28
• Public Version Status: Update
• Public Device Record Key: 93d71e81-abdb-4eae-8d09-181281abb8e7

Device Description

CS 8100SC 3D ACCESS

Device Characteristics

• Single Use: No
• Prescription Use (Rx): Yes
• Over the Counter (OTC): No
• Kit: No
• Combination Product: No
• HCT/P: No
• Contains NRL: No
• Not Made with NRL: No
• MRI Safety: Labeling does not contain MRI Safety Information
• Direct Marking Exempt: No
• PM Exempt: No
• Has Serial Number: Yes
• Has Lot/Batch Number: No
• Has Manufacturing Date: No
• Has Expiration Date: No
• Has Donation ID: No

Sterilization

• Is Sterile: No
• Sterilization Prior Use: No

Product Codes

Code	Name	Medical Specialty	Regulation #	Device Class
MUH	System,x-ray,extraoral source,digital	Dental	872.1800	2
OAS	X-ray, tomography, computed, dental	Radiology	892.1750	2

GMDN Terms

Code	Name	Definition	Implantable	Status
61019	Cone beam computed tomography system, head/neck	A stationary assembly of mains electricity (AC-powered) devices intended to produce two- or three-dimensional (3-D) diagnostic digital x-ray images of the head/neck using cone beam computed tomography (CBCT). It consists of an x-ray source assembly, high-voltage generator, x-ray detector, processor, reconstruction software, and patient support device (e.g., seat, stabilizing bite block); the patient is typically scanned in an upright position by a rotating arm. It is typically intended for (but not limited to) dental and ear/nose/throat (ENT) applications.	No	Active
43620	Stationary cephalometric x-ray system, digital	A stationary cephalometric x-ray system designed to generate and control x-ray beams and to record the absorption patterns of x-rays passing through a patient's head (skull). It is used for: 1) radiographic visualization and measurement of the dimensions of the human head, e.g., abnormal structures of the skull; 2) orthodontic assessment of the relationship of the teeth to the jaws and the jaws to the rest of the facial skeleton; 3) assessment airway and other soft tissue structures. The sensor is placed outside the head. The data is either from analogue imaging and digitized afterwards or by digital imaging.	No	Active

Identifiers

Type	ID	Issuing Agency	Package Type	Qty per Pkg	Pkg Status	Pkg Discontinue Date
Primary	60192155500237	GS1