QINFLOW AC STATION EXTENDED SET WARRIOR

Basic Information

• Brand Name: QINFLOW AC STATION EXTENDED SET WARRIOR
• Primary DI: 47290016740200
• Version / Model: QIF-01-12W
• Company Name: QUALITY IN FLOW LTD
• Labeler DUNS: 533186560
• Distribution Status: In Commercial Distribution
• Device Count in Pkg: 1
• Record Status: Published
• Publish Date: 2025-02-18
• Public Version: 1
• Public Version Date: 2025-02-26
• Public Version Status: New
• Public Device Record Key: e3bcf647-1b39-4563-a4f7-6b36463c9288

Device Description

Warrior AC Station operated with Warrior Base Unit and Extension Cable

Device Characteristics

• Single Use: No
• Prescription Use (Rx): Yes
• Over the Counter (OTC): No
• Kit: Yes
• Combination Product: No
• HCT/P: No
• Contains NRL: No
• Not Made with NRL: No
• MRI Safety: MR Unsafe
• Direct Marking Exempt: No
• PM Exempt: No
• Has Serial Number: Yes
• Has Lot/Batch Number: No
• Has Manufacturing Date: Yes
• Has Expiration Date: No
• Has Donation ID: No

Sterilization

• Is Sterile: No
• Sterilization Prior Use: No

Product Codes

Code	Name	Medical Specialty	Regulation #	Device Class
BSB	Warmer, Blood, Non-Electromagnetic Radiation	Hematology	864.9205	2
LGZ	Warmer, Thermal, Infusion Fluid	General Hospital	880.5725	2

GMDN Terms

Code	Name	Definition	Implantable	Status
36545	Basic power supply, reusable	A device designed to receive alternating-current energy (AC-power) from a mains electricity power line and deliver one or more regulated direct-current outputs to supply devices with electrical energy. It typically consists of a step-up or step-down transformer, a rectifier, a filter, and an electronic regulator that keeps the voltage, current, or power output stable over a broad range of loads and input voltages. This is a reusable device.	No	Active
47487	Electrical-only medical device connection cable, reusable	A non-patient-contact, insulated, electrical cord with a connector (plug) at both ends designed to transmit electrical power and/or signal (data) between medical devices (e.g., to connect a lead, electrical catheter, handpiece, or monitor to a parent device). It is not intended to connect directly to patient-worn electrodes (i.e., it is not a lead), is not intended to connect to the mains (i.e., not a mains power cable), does not generate any type of power and/or signal, and has no additional non-electrical conducting or processing functionality. This is a reusable device.	No	Active
47616	Conduction blood/fluid warmer	An electrically-powered device designed for in-line heating of banked blood, blood products, intravenous (IV) solutions, and irrigation fluids, typically from about 4ºC to near body temperature (i.e., 35 to 37ºC) before infusion, through the conduction of heat. The device usually includes a surface heat exchanger (e.g., heated dry plate) for the conduction of heat to the infusion blood/fluid via a disposable set (e.g., tubing or pouch); it also includes temperature controls and/or alarms. It is typically mounted on an IV pole under the infusion bag; it does not infuse blood/fluid.	No	Active

Identifiers

Type	ID	Issuing Agency	Package Type	Qty per Pkg	Pkg Status	Pkg Discontinue Date
Primary	47290016740200	GS1