Medline

Basic Information

• Brand Name: Medline
• Primary DI: 10888277363748
• Version / Model: MPN40007
• Catalog Number: MPN40007
• Company Name: MEDLINE INDUSTRIES, INC.
• Labeler DUNS: 025460908
• Distribution Status: In Commercial Distribution
• Device Count in Pkg: 1
• Record Status: Published
• Publish Date: 2016-10-14
• Public Version: 5
• Public Version Date: 2020-09-07
• Public Version Status: Update
• Public Device Record Key: 8a6c5aba-c723-4a61-898c-761def804705

Device Description

DRILL GUIDE, POLYAXIAL CONE, 2.0/2.8MM

Device Characteristics

• Single Use: No
• Prescription Use (Rx): No
• Over the Counter (OTC): No
• Kit: No
• Combination Product: No
• HCT/P: No
• Contains NRL: No
• Not Made with NRL: Yes
• MRI Safety: MR Unsafe
• Direct Marking Exempt: No
• PM Exempt: No
• Has Serial Number: No
• Has Lot/Batch Number: Yes
• Has Manufacturing Date: No
• Has Expiration Date: No
• Has Donation ID: No

Sterilization

• Is Sterile: No
• Sterilization Prior Use: Yes
• Sterilization Methods: Moist Heat or Steam Sterilization

Product Codes

Code	Name	Medical Specialty	Regulation #	Device Class
HRS	Plate, fixation, bone	Orthopedic	888.3030	2
HWC	Screw, fixation, bone	Orthopedic	888.3040	2
GAD	RETRACTOR	General, Plastic Surgery	878.4800	1

GMDN Terms

Code	Name	Definition	Implantable	Status
47815	Orthopaedic implant aiming/guiding block, reusable	A surgical, jig-like device designed as a preshaped block with a defined pattern of prefabricated holes used to guide other instruments [e.g., drill sleeves and guide wires (Kirschner wires)] and/or to align a corresponding implant (e.g., a fixation plate) during an orthopaedic procedure. It is typically made of metallic or synthetic materials and may have an attachment point for an implant. This is a reusable device.	No	Obsolete
35095	Surgical drill guide, reusable	A manual surgical device designed to simultaneously place, angle, and guide a rotating surgical drill on hard tissue (e.g., bone); some types are also intended for guiding bone-coring instruments (e.g., keel punch). It is designed in a tubular form or with guiding holes and may have serrations at its distal end to enable firm placement on hard tissue surfaces (it is not bored into the tissue); it can have a handle or be held by another device (e.g., orthopaedic jig), and typically allows protection of the surrounding soft tissue during surgery. It is typically made of metal and may have graduations along its length; it is not custom-made for a specific patient. This is a reusable device.	No	Active

Identifiers

Type	ID	Issuing Agency	Package Type	Qty per Pkg	Pkg Status	Pkg Discontinue Date
Primary	10888277363748	GS1

Customer Contacts

• Phone: [phone]
• Email: [email protected]

Device Sizes

Type	Value	Unit	Text
Device Size Text, specify			Length 2.0 Millimeter X Width 2.8 Millimeter

Storage Conditions

• Type: Special Storage Condition, Specify
• Special Conditions: Store devices in a clean and dry environment. The devices are manufactured from non-degradable materials. When stored under the recommended conditions, the shelf life of this product is not limited.