Medline

Basic Information

• Brand Name: Medline
• Primary DI: 10888277334472
• Version / Model: 71070346RH
• Catalog Number: 71070346RH
• Company Name: MEDLINE INDUSTRIES, INC.
• Labeler DUNS: 025460908
• Distribution Status: In Commercial Distribution
• Device Count in Pkg: 1
• Record Status: Published
• Publish Date: 2023-10-09
• Public Version: 1
• Public Version Date: 2023-10-17
• Public Version Status: New
• Public Device Record Key: be92483b-5199-4a4d-9c76-f68865a6303e

Device Description

SMITH & NEPHEW SHRT, FOR 6MM HALF PIN 4

Device Characteristics

• Single Use: Yes
• Prescription Use (Rx): Yes
• Over the Counter (OTC): No
• Kit: No
• Combination Product: No
• HCT/P: No
• Contains NRL: No
• Not Made with NRL: No
• MRI Safety: Labeling does not contain MRI Safety Information
• Direct Marking Exempt: No
• PM Exempt: Yes
• Has Serial Number: No
• Has Lot/Batch Number: Yes
• Has Manufacturing Date: No
• Has Expiration Date: No
• Has Donation ID: No

Sterilization

• Is Sterile: Yes
• Sterilization Prior Use: No

Product Codes

Code	Name	Medical Specialty	Regulation #	Device Class
GFG	BIT, SURGICAL	General, Plastic Surgery	878.4820	1

GMDN Terms

Code	Name	Definition	Implantable	Status
61235	Cannulated surgical drill bit, single-use	A metal shaft intended to be mounted into an appropriate surgical power tool (e.g., a pneumatic reamer or drilling system handpiece with appropriate torque capacity) and rotated to bore into hard/tough tissues (e.g., bone, cartilage) in order to clear a channel of the same diameter as the shaft, typically for the insertion of a prosthetic device or other orthopaedic implant. It has a hollow centre so it can be fed over a drill guiding pin, and may be flexible; devices to assist the procedure (e.g., drill guiding pin, manual driver) may be included. This is a single-use device.	No	Active
43390	Fluted surgical drill bit, single-use	A shaft of metal with an obtuse, V-shaped cutting edge designed to be rotated to bore into bone to create a hole of the same dimension as the diameter of the shaft. This device, commonly called a "twist drill", has a cylindrical design with a double-edged cutting head that is formed from two spiralled flutes that extend the length of the insertion part of the drill. At the proximal end, it is mounted into a surgical power tool or a surgical hand drill/brace. This is a single-use device.	No	Active

Identifiers

Type	ID	Issuing Agency	Package Type	Qty per Pkg	Pkg Status	Pkg Discontinue Date
Primary	10888277334472	GS1

Customer Contacts

• Phone: [phone]
• Email: [email protected]