CERENOVUS ENTERPRISE

Basic Information

• Brand Name: CERENOVUS ENTERPRISE
• Primary DI: 10886704075370
• Version / Model: ENF403012
• Catalog Number: ENF403012
• Company Name: Medos International Sàrl
• Labeler DUNS: 482661753
• Distribution Status: In Commercial Distribution
• Device Count in Pkg: 1
• Record Status: Published
• Publish Date: 2015-11-16
• Public Version: 5
• Public Version Date: 2021-02-05
• Public Version Status: Update
• Public Device Record Key: 8ab88302-32bb-47a2-8f9d-4aa8a060ab94

Device Description

CERENOVUS ENTERPRISE 2 Vascular Reconstruction Device Stent OD (mm) 4.0 Stent Length (mm) 30 Recommended Microcatheter .021 Inch (0.533mm) Maximum Stent Foreshortening 2.8 mm Humanitarian Device USA ONLY): Authorized by Federal Law for use with embolic coils for the treatment of wide-neck, intracranial, saccular, or fusiform aneurysms arising from a parent vessel with a diameter of greater than or equal to 2.5mm and less than or equal to 4mm. Wide-neck is defined as having a neck width greater than or equal to 4mm or a dome-to-neck ratio less than 2mm. The effectiveness of this device for this use has not been demonstrated.

Device Characteristics

• Single Use: Yes
• Prescription Use (Rx): Yes
• Over the Counter (OTC): No
• Kit: No
• Combination Product: No
• HCT/P: No
• Contains NRL: No
• Not Made with NRL: No
• MRI Safety: MR Conditional
• Direct Marking Exempt: No
• PM Exempt: No
• Has Serial Number: No
• Has Lot/Batch Number: Yes
• Has Manufacturing Date: No
• Has Expiration Date: Yes
• Has Donation ID: No

Sterilization

• Is Sterile: Yes
• Sterilization Prior Use: No

Product Codes

Code	Name	Medical Specialty	Regulation #	Device Class
NJE	intracranial neurovascular stent	Unknown		f

GMDN Terms

Code	Name	Definition	Implantable	Status
46352	Bare-metal intracranial vascular stent	A non-bioabsorbable tubular device typically intended to be implanted into the base or parent artery of an intracranial aneurysm (e.g., wide-neck aneurysm situated at the base of a bifurcation) to facilitate the delivery of embolics to fill the aneurysm, facilitate clotting within the aneurysm by slowing blood flow into it, and/or to provide support for a neurovascular embolization coil placed inside the aneurysm. It is made of uncoated metal [e.g., nickel-titanium alloy (Nitinol)] and self-expands after it is delivered to the site of implantation and released (e.g., from a dedicated delivery instrument). Disposable devices associated with implantation may be included.	Yes	Active

Identifiers

Type	ID	Issuing Agency	Package Type	Qty per Pkg	Pkg Status	Pkg Discontinue Date
Primary	10886704075370	GS1

Customer Contacts

• Phone: [phone]
• Email: [email protected]

Premarket Submissions

Submission Number	Supplement Number
H060001	015