FDA UDI
In Commercial Distribution
🇺🇸 United States
Pronumbra
DI: 10841439114749
·
Model: RT-C878K
·
MEDTEC, INC.
Product Codes
3
GMDN Terms
1
Identifiers
1
Pkg Device Count
1
Let the assistant research this device
The Research Assistant compiles product codes, classification, clearances and adverse events for this device — and cites every record.
Free to try · every answer cites its records
Basic Information
- Brand Name
- Pronumbra
- Primary DI
- 10841439114749
- Version / Model
- RT-C878K
- Catalog Number
- RT-C878K
- Company Name
- MEDTEC, INC.
- Labeler DUNS
- 103977526
- Distribution Status
- In Commercial Distribution
- Device Count in Pkg
- 1
- Record Status
- Published
- Publish Date
- 2025-09-12
- Public Version
- 1
- Public Version Date
- 2025-09-22
- Public Version Status
- New
- Public Device Record Key
- 485a7cc7-bfbd-46fa-8dbc-00d338f18066
Device Description
Pronumbra Head, Neck & Shoulder Mask with Integrated Shim, 3.2mm Microperf Fibreplast
Device Characteristics
- Single Use
- No
- Prescription Use (Rx)
- Yes
- Over the Counter (OTC)
- No
- Kit
- No
- Combination Product
- No
- HCT/P
- No
- Contains NRL
- No
- Not Made with NRL
- No
- MRI Safety
- MR Safe
- Direct Marking Exempt
- Yes
- PM Exempt
- No
- Has Serial Number
- No
- Has Lot/Batch Number
- Yes
- Has Manufacturing Date
- Yes
- Has Expiration Date
- No
- Has Donation ID
- No
Sterilization
- Is Sterile
- No
- Sterilization Prior Use
- No
Product Codes
| Code | Name | Medical Specialty | Regulation # | Device Class |
|---|---|---|---|---|
| IXQ | Table, Radiographic, Stationary Top | Radiology | 892.1980 | 2 |
| IYE | Accelerator, Linear, Medical | Radiology | 892.5050 | 2 |
| LNH | System, Nuclear Magnetic Resonance Imaging | Radiology | 892.1000 | 2 |
GMDN Terms
| Code | Name | Definition | Implantable | Status |
|---|---|---|---|---|
| 40896 | Patient positioning thermoplastic mould material | A thermoplastic material used to create moulds of a patient's body. It is commonly supplied as sheets or meshes of thermoplastic material that have been coated with polyurethane for ease of handling and positioning. Most of these materials are softened by heating in hot water and while softened, are moulded around the patient's anatomy. When cooled, it hardens to form a custom-made mould or cast of that part of the body. After the moulding process is complete, it is typically attached to a board, frame, or another patient positioning system (PPS) or immobilization device. After application, this device cannot be reused (i.e., remoulded). | No | Active |
Identifiers
| Type | ID | Issuing Agency | Package Type | Qty per Pkg | Pkg Status | Pkg Discontinue Date |
|---|---|---|---|---|---|---|
| Primary | 10841439114749 | GS1 |
Customer Contacts
- Phone
- +1 712-737-8688
- [email protected]
Premarket Submissions
| Submission Number | Supplement Number |
|---|---|
| K180021 | 000 |