FDA UDI
Not in Commercial Distribution
🇺🇸 United States
IBC Aortic Punch, Long, 6.0mm
DI: 10814321020282
·
Model: APL60
·
Movair, Inc.
Product Codes
1
GMDN Terms
1
Identifiers
2
Pkg Device Count
10
Let the assistant research this device
The Research Assistant compiles product codes, classification, clearances and adverse events for this device — and cites every record.
Free to try · every answer cites its records
Basic Information
- Brand Name
- IBC Aortic Punch, Long, 6.0mm
- Primary DI
- 10814321020282
- Version / Model
- APL60
- Company Name
- Movair, Inc.
- Labeler DUNS
- 788403103
- Distribution Status
- Not in Commercial Distribution
- Device Count in Pkg
- 10
- Record Status
- Published
- Publish Date
- 2016-08-02
- Public Version
- 4
- Public Version Date
- 2025-02-24
- Public Version Status
- Update
- Public Device Record Key
- 9134562a-b52a-4459-8417-593696bc79c9
- Distribution End Date
- 2021-12-13
Device Description
The IBC Aortic Punch is a single use, disposable, surgical punch to be used to create an opening(s) in the wall of the aorta to prepare a site for anastomosis.
Device Characteristics
- Single Use
- Yes
- Prescription Use (Rx)
- Yes
- Over the Counter (OTC)
- No
- Kit
- No
- Combination Product
- No
- HCT/P
- No
- Contains NRL
- No
- Not Made with NRL
- No
- MRI Safety
- Labeling does not contain MRI Safety Information
- Direct Marking Exempt
- No
- PM Exempt
- Yes
- Has Serial Number
- No
- Has Lot/Batch Number
- Yes
- Has Manufacturing Date
- Yes
- Has Expiration Date
- Yes
- Has Donation ID
- No
Sterilization
- Is Sterile
- Yes
- Sterilization Prior Use
- No
Product Codes
| Code | Name | Medical Specialty | Regulation # | Device Class |
|---|---|---|---|---|
| DWS | Instruments, Surgical, Cardiovascular | Cardiovascular | 870.4500 | 1 |
GMDN Terms
| Code | Name | Definition | Implantable | Status |
|---|---|---|---|---|
| 47914 | Aorta punch, single-use | A sterile, manual surgical instrument designed to cut a circular or elliptical plug of tissue from the wall of the aorta to create an anastomosis site during vascular surgery. It consists of a pointed, cone-shaped, disk-like tip on the end of a plunger that is inserted through a small incision made; its diameter/size corresponds to the cut hole. Behind the tip is a thinner section which entraps (holds) the tissue as the sharp circular/elliptical blade is pressed down the plunger into and through the tissue. It is typically made of steel and plastic and is available in various punch sizes. It can equally be used to punch holes in other vessels when needed. This is a single-use device. | No | Active |
Identifiers
| Type | ID | Issuing Agency | Package Type | Qty per Pkg | Pkg Status | Pkg Discontinue Date |
|---|---|---|---|---|---|---|
| Primary | 10814321020282 | GS1 | ||||
| Unit of Use | 00814321020285 | GS1 |