FDA UDI
In Commercial Distribution
🇺🇸 United States
UF(II) Bar holder abutment
DI: 08806169097286
·
Model: UNMBHCA 4507N
·
DIO Corporation
Product Codes
1
GMDN Terms
1
Identifiers
1
Pkg Device Count
1
Basic Information
- Brand Name
- UF(II) Bar holder abutment
- Primary DI
- 08806169097286
- Version / Model
- UNMBHCA 4507N
- Catalog Number
- UNMBHCA 4507N
- Company Name
- DIO Corporation
- Labeler DUNS
- 631085206
- Distribution Status
- In Commercial Distribution
- Device Count in Pkg
- 1
- Record Status
- Published
- Publish Date
- 2022-03-01
- Public Version
- 1
- Public Version Date
- 2022-03-09
- Public Version Status
- New
- Public Device Record Key
- cdadc9aa-1102-411d-ba97-db8d390fefdf
Device Description
The UF(II) Bar holder abutment is intended to be used as a retention device in conjunction with the fixture in the maxillary and/or mandibular arch to provide support for overdentures for partially and fully edentulous patients.
Device Characteristics
- Single Use
- Yes
- Prescription Use (Rx)
- Yes
- Over the Counter (OTC)
- No
- Kit
- No
- Combination Product
- No
- HCT/P
- No
- Contains NRL
- No
- Not Made with NRL
- No
- MRI Safety
- Labeling does not contain MRI Safety Information
- Direct Marking Exempt
- Yes
- PM Exempt
- No
- Has Serial Number
- Yes
- Has Lot/Batch Number
- Yes
- Has Manufacturing Date
- Yes
- Has Expiration Date
- No
- Has Donation ID
- No
Sterilization
- Is Sterile
- No
- Sterilization Prior Use
- Yes
- Sterilization Methods
- Moist Heat or Steam Sterilization
Product Codes
| Code | Name | Medical Specialty | Regulation # | Device Class |
|---|---|---|---|---|
| NHA | Abutment, Implant, Dental, Endosseous | Dental | 872.3630 | 2 |
GMDN Terms
| Code | Name | Definition | Implantable | Status |
|---|---|---|---|---|
| 44879 | Dental implant suprastructure, permanent, preformed | A prefabricated device intended to provide a permanent intermediate fixture level between a dental implant and the final prosthesis/restoration (e.g., bridge, single tooth, overdenture). It includes one or more structural component(s) [e.g., abutment, ball, bar, bar overlay, coping, ring], and may be made of various materials [e.g., titanium (Ti), plastic, gold alloy]. It includes devices glued to prostheses and/or devices that can be replaced during cleaning cycles. An abutment screw(s) may be included, however the suprastructure does not represent the screw(s) in isolation. It may also be referred to as an abutment assembly or mesostructure. | Yes | Active |
Identifiers
| Type | ID | Issuing Agency | Package Type | Qty per Pkg | Pkg Status | Pkg Discontinue Date |
|---|---|---|---|---|---|---|
| Primary | 08806169097286 | GS1 |
Premarket Submissions
| Submission Number | Supplement Number |
|---|---|
| K193404 | 000 |
Storage Conditions
- Type
- Storage Environment Temperature
- Temperature Range
- 1 – 30 Degrees Celsius