HAD1717MC

Basic Information

• Brand Name: HAD1717MC
• Primary DI: 08800070400012
• Version / Model: HAD1717MC
• Company Name: H&abyz Co., Ltd
• Labeler DUNS: 689514436
• Distribution Status: In Commercial Distribution
• Device Count in Pkg: 1
• Record Status: Published
• Publish Date: 2023-04-07
• Public Version: 1
• Public Version Date: 2023-04-17
• Public Version Status: New
• Public Device Record Key: f71a0ad5-c6a1-4b5c-ac5e-d5566f9da52f

Device Description

The HAD1717MC is a wired digital flat panel X-ray detector. The HAD1717MC X-ray detector consists of a TFT panel and a scintillator electronic controller, and supports AED (Automatic Exposure Detection) function that can operate without a separate trigger signal. Flat panel sensors for HAD1717MC are fabricated using thin film technology based on amorphous silicon technology, and the sensors are similar to existing photodiode arrays. In this case, each pixel is composed of a photodiode and a thin film transistor (TFT). Amorphous silicon photodiodes are optimized for green wavelengths and can be used in combination with scintillators such as CsI. The incident X-rays are converted into visible light by the scintillator, and the visible light is stored in an internal capacitor through a photodiode. Charges charged to capacitors switch TFT gates of panel matrix (panel matrix) and convert them into digital signals on a line and pass them to the control unit. The digital data generated is then passed to the PC via Ethernet.

Device Characteristics

• Single Use: No
• Prescription Use (Rx): Yes
• Over the Counter (OTC): No
• Kit: No
• Combination Product: No
• HCT/P: No
• Contains NRL: No
• Not Made with NRL: No
• MRI Safety: Labeling does not contain MRI Safety Information
• Direct Marking Exempt: No
• PM Exempt: No
• Has Serial Number: Yes
• Has Lot/Batch Number: Yes
• Has Manufacturing Date: Yes
• Has Expiration Date: No
• Has Donation ID: No

Sterilization

• Is Sterile: No
• Sterilization Prior Use: No

Product Codes

Code	Name	Medical Specialty	Regulation #	Device Class
MQB	Solid State X-Ray Imager (Flat Panel/Digital Imager)	Radiology	892.1680	2

GMDN Terms

Code	Name	Definition	Implantable	Status
61108	Indirect flat panel x-ray detector	An electrically-powered, cassette-like device intended to be used as part of an x-ray system to detect x-ray images following exposure, and create a digital signal; it is not dedicated to imaging of a specific anatomy. It includes two types of transducing technology (i.e., indirect): a scintillator [e.g. caesium iodide (CsI)] screen converts x-ray energy into light, followed by the conversion of light into a digital signal by photodiode array. The image data can be sent to an appropriate processing unit through a wired or wireless connection (e.g., Wi-Fi). It may be used in place of a fixed detector in x-ray imaging systems, e.g., as part of a digital imaging conversion system.	No	Active

Identifiers

Type	ID	Issuing Agency	Package Type	Qty per Pkg	Pkg Status	Pkg Discontinue Date
Primary	08800070400012	GS1

Premarket Submissions

Submission Number	Supplement Number
K200018	000

Storage Conditions

• Type: Handling Environment Temperature
• Temperature Range: 5 – 40 Degrees Celsius
• Type: Handling Environment Humidity
• Temperature Range: 30 – 75 Percent (%) Relative Humidity
• Type: Handling Environment Atmospheric Pressure
• Temperature Range: 70 – 106 KiloPascal
• Type: Storage Environment Temperature
• Temperature Range: -10 – 50 Degrees Celsius
• Type: Storage Environment Humidity
• Temperature Range: 10 – 80 Percent (%) Relative Humidity
• Type: Storage Environment Atmospheric Pressure
• Temperature Range: 70 – 106 KiloPascal