DIO UF HSA INTERNAL SUB-MERGED IMPLANT SYSTEM
Basic Information
- Brand Name
- DIO UF HSA INTERNAL SUB-MERGED IMPLANT SYSTEM
- Primary DI
- 08800049424391
- Version / Model
- SSAA 455025BH
- Catalog Number
- SSAA 455025BH
- Company Name
- DIO Corporation
- Labeler DUNS
- 631085206
- Distribution Status
- In Commercial Distribution
- Device Count in Pkg
- 1
- Record Status
- Published
- Publish Date
- 2022-03-01
- Public Version
- 2
- Public Version Date
- 2022-11-15
- Public Version Status
- Update
- Public Device Record Key
- eced83e2-9ab1-44a4-91cb-5896675b42a0
Device Description
The DIO UF HSA Internal Sub-Merged Implant System is comprised of dental implants, Superstructures, Instruments for prosthetics and Surgical Instruments. The DIO UF HSA Internal Sub-Merged Implant System is specially designed for using in dental implant surery. A successfully osseointegrated implant willl achieve a firm implant when the fixture is operated under controlled conditions, per well known clinical studies. There are intended for use in partially or fully edendulous mandibles and maxillae, in support of single or multiple-unit restorations. The superstructures consist of screws(Cover Screw, Coping Screw), abutments(Screw retained type, Cemented retained type, Over denture retained type), Solid protect cap. The screws are made of commercial pure titanium, grade 4(ASTM F67) and Ti-6A1-4VELI(ASTM F136) intended to be used in a narrow tooth gap after implant insertion. And the screw is used to protect exposed top of the implant or to attach the abutment to implant.
Device Characteristics
- Single Use
- Yes
- Prescription Use (Rx)
- Yes
- Over the Counter (OTC)
- No
- Kit
- No
- Combination Product
- No
- HCT/P
- No
- Contains NRL
- No
- Not Made with NRL
- No
- MRI Safety
- Labeling does not contain MRI Safety Information
- Direct Marking Exempt
- Yes
- PM Exempt
- No
- Has Serial Number
- No
- Has Lot/Batch Number
- Yes
- Has Manufacturing Date
- Yes
- Has Expiration Date
- No
- Has Donation ID
- No
Sterilization
- Is Sterile
- No
- Sterilization Prior Use
- Yes
- Sterilization Methods
- Moist Heat or Steam Sterilization
Product Codes
| Code | Name | Medical Specialty | Regulation # | Device Class |
|---|---|---|---|---|
| NHA | Abutment, Implant, Dental, Endosseous | Dental | 872.3630 | 2 |
GMDN Terms
| Code | Name | Definition | Implantable | Status |
|---|---|---|---|---|
| 44879 | Dental implant suprastructure, permanent, preformed | A prefabricated device intended to provide a permanent intermediate fixture level between a dental implant and the final prosthesis/restoration (e.g., bridge, single tooth, overdenture). It includes one or more structural component(s) [e.g., abutment, ball, bar, bar overlay, coping, ring], and may be made of various materials [e.g., titanium (Ti), plastic, gold alloy]. It includes devices glued to prostheses and/or devices that can be replaced during cleaning cycles. An abutment screw(s) may be included, however the suprastructure does not represent the screw(s) in isolation. It may also be referred to as an abutment assembly or mesostructure. | Yes | Active |
Identifiers
| Type | ID | Issuing Agency | Package Type | Qty per Pkg | Pkg Status | Pkg Discontinue Date |
|---|---|---|---|---|---|---|
| Primary | 08800049424391 | GS1 |
Customer Contacts
- Phone
- 213-365-2875
- [email protected]
Device Sizes
| Type | Value | Unit | Text |
|---|---|---|---|
| Device Size Text, specify | Ø4.5X25°(5.0)mm |
Storage Conditions
- Type
- Storage Environment Temperature
- Temperature Range
- 1 – 30 Degrees Celsius