DIOnavi-Denture02

Basic Information

• Brand Name: DIOnavi-Denture02
• Primary DI: 08800049401842
• Version / Model: 3DDEN02-100A4
• Catalog Number: 3DDEN02-100A4
• Company Name: DIO Corporation
• Labeler DUNS: 631085206
• Distribution Status: Not in Commercial Distribution
• Device Count in Pkg: 1
• Record Status: Published
• Publish Date: 2021-05-11
• Public Version: 3
• Public Version Date: 2022-02-25
• Public Version Status: Update
• Public Device Record Key: 234844a9-386a-4f49-bac9-10b1da7039e8
• Distribution End Date: 2022-02-04

Device Description

DIOnavi-Denture02 is a light-curable resin indicated for fabrication and repair of full and partial removable dentures and baseplates. The material is an alternative to traditional heat-curable and auto polymerizing resins. Fabrication of dental prosthetics with DIOnavi-Denture02 requires a computer-aided design and manufacturing (CAD/CAM) system that includes the following components: digital denture base files based on a digital impression, a digital light processing(DLP) printer, and curing light equipment.

Device Characteristics

• Single Use: No
• Prescription Use (Rx): Yes
• Over the Counter (OTC): No
• Kit: No
• Combination Product: No
• HCT/P: No
• Contains NRL: No
• Not Made with NRL: No
• MRI Safety: Labeling does not contain MRI Safety Information
• Direct Marking Exempt: No
• PM Exempt: No
• Has Serial Number: No
• Has Lot/Batch Number: Yes
• Has Manufacturing Date: Yes
• Has Expiration Date: Yes
• Has Donation ID: No

Sterilization

• Is Sterile: No
• Sterilization Prior Use: No

Product Codes

Code	Name	Medical Specialty	Regulation #	Device Class
EBI	Resin, Denture, Relining, Repairing, Rebasing	Dental	872.3760	2

GMDN Terms

Code	Name	Definition	Implantable	Status
16730	Dental appliance fabrication material, resin	A resin intended to be used in the dental laboratory to manufacture a patient-worn dental prosthesis or appliance (e.g., denture base, occlusal splint/night guard), that either: 1) polymerizes under heat (heat-cured), light (light-cured), and/or after a period of time (self-cured); or 2) can be shaped by a dental mill [e.g., based on computer-aided design/computer-aided manufacturing (CAD/CAM) technology]. It may in addition be intended to fabricate non-patient-worn devices (e.g., drilling templates using 3-D printing). After application, this material cannot be refabricated.	No	Active

Identifiers

Type	ID	Issuing Agency	Package Type	Qty per Pkg	Pkg Status	Pkg Discontinue Date
Primary	08800049401842	GS1

Premarket Submissions

Submission Number	Supplement Number
K210828	000