DIO UF HSA Internal Sub-Merged Implant System

Basic Information

• Brand Name: DIO UF HSA Internal Sub-Merged Implant System
• Primary DI: 08800049226841
• Version / Model: UF(II) 5507S
• Catalog Number: UF(II) 5507S
• Company Name: DIO Corporation
• Labeler DUNS: 631085206
• Distribution Status: In Commercial Distribution
• Device Count in Pkg: 1
• Record Status: Published
• Publish Date: 2022-03-01
• Public Version: 1
• Public Version Date: 2022-03-09
• Public Version Status: New
• Public Device Record Key: e407764a-c5a8-4345-9ef6-cf4d18f20be7

Device Description

The DIO UF HSA Internal Sub-Merged Implant System is comprised of Dental Implants, Superstructures, Instruments for prosthetics and Surgical Instruments. The DIO UF HSA Internal Sub-Merged Implant System is specially designed for using in dental implant surgery. A successfully osseointegrated fixtures will achieve a firm implant when the fixture is operated under the controlled conditions per well known clinical studies. There are intended for use in partially or fully edentulous mandibles and maxillae, in support of single or multiple-unit restorations.

Device Characteristics

• Single Use: Yes
• Prescription Use (Rx): Yes
• Over the Counter (OTC): No
• Kit: No
• Combination Product: No
• HCT/P: No
• Contains NRL: No
• Not Made with NRL: No
• MRI Safety: Labeling does not contain MRI Safety Information
• Direct Marking Exempt: Yes
• PM Exempt: No
• Has Serial Number: Yes
• Has Lot/Batch Number: Yes
• Has Manufacturing Date: Yes
• Has Expiration Date: Yes
• Has Donation ID: No

Sterilization

• Is Sterile: Yes
• Sterilization Prior Use: No

Product Codes

Code	Name	Medical Specialty	Regulation #	Device Class
DZE	Implant, Endosseous, Root-Form	Dental	872.3640	2

GMDN Terms

Code	Name	Definition	Implantable	Status
55849	Screw endosteal dental implant, two-piece	A sterile device made of alloplastic materials [e.g., titanium (Ti), stainless steel, ceramic] intended to be surgically implanted into alveolar and/or basal bone of the mandible or maxilla to provide support and a means of retention for a dental prosthesis (e.g., bridge, single-tooth, overdenture). It is a two-piece device composed of an anchorage component (implant body) in the form of a threaded screw that is implanted into bone, and a retention component (implant abutment), typically attached to the anchorage component after implantation, that protrudes through gingival tissues to support the prosthesis.	Yes	Active

Identifiers

Type	ID	Issuing Agency	Package Type	Qty per Pkg	Pkg Status	Pkg Discontinue Date
Primary	08800049226841	GS1

Customer Contacts

• Phone: [phone]
• Email: [email protected]

Premarket Submissions

Submission Number	Supplement Number
K122519	000

Device Sizes

Type	Value	Unit	Text
Device Size Text, specify			Ø5.5X7mm

Storage Conditions

• Type: Storage Environment Temperature
• Temperature Range: 1 – 30 Degrees Celsius