Mask LMCF-2

Basic Information

• Brand Name: Mask LMCF-2
• Primary DI: 08719425706177
• Version / Model: LMCF-2Pc
• Company Name: MACROMEDICS B.V.
• Labeler DUNS: 489730120
• Distribution Status: In Commercial Distribution
• Device Count in Pkg: 1
• Record Status: Published
• Publish Date: 2017-03-23
• Public Version: 3
• Public Version Date: 2018-07-06
• Public Version Status: Update
• Public Device Record Key: e02ddbbf-b402-49e3-9fff-42ede1f3d079

Device Description

MacroCast™ fine perfo, 2-precut, L-profiles

Device Characteristics

• Single Use: Yes
• Prescription Use (Rx): No
• Over the Counter (OTC): No
• Kit: No
• Combination Product: No
• HCT/P: No
• Contains NRL: No
• Not Made with NRL: No
• MRI Safety: MR Safe
• Direct Marking Exempt: No
• PM Exempt: No
• Has Serial Number: No
• Has Lot/Batch Number: Yes
• Has Manufacturing Date: No
• Has Expiration Date: No
• Has Donation ID: No

Sterilization

• Is Sterile: No
• Sterilization Prior Use: No

Product Codes

Code	Name	Medical Specialty	Regulation #	Device Class
IYE	Accelerator, linear, medical	Radiology	892.5050	2

GMDN Terms

Code	Name	Definition	Implantable	Status
40896	Patient positioning thermoplastic mould material	A thermoplastic material used to create moulds of a patient's body. It is commonly supplied as sheets or meshes of thermoplastic material that have been coated with polyurethane for ease of handling and positioning. Most of these materials are softened by heating in hot water and while softened, are moulded around the patient's anatomy. When cooled, it hardens to form a custom-made mould or cast of that part of the body. After the moulding process is complete, it is typically attached to a board, frame, or another patient positioning system (PPS) or immobilization device. After application, this device cannot be reused (i.e., remoulded).	No	Active

Identifiers

Type	ID	Issuing Agency	Package Type	Qty per Pkg	Pkg Status	Pkg Discontinue Date
Primary	08719425706177	GS1

Premarket Submissions

Submission Number	Supplement Number
K142420	000