Contact Gel 2ml

Basic Information

• Brand Name: Contact Gel 2ml
• Primary DI: 07640121880858
• Version / Model: GEL-04
• Company Name: SenTec AG
• Labeler DUNS: 480797856
• Distribution Status: In Commercial Distribution
• Device Count in Pkg: 1
• Record Status: Published
• Publish Date: 2019-03-08
• Public Version: 1
• Public Version Date: 2019-03-18
• Public Version Status: New
• Public Device Record Key: e1bd03c4-1db1-4406-855d-fdd294217648

Device Description

The Contact Gel is required for proper CO2 gas conduction from the patient's skin to the SenTec TC Sensors. Every time a SenTec TC Sensor is to be attached to the measurement site, one drop of Contact Gel must be applied to the center of the Sensor membrane.

Device Characteristics

• Single Use: No
• Prescription Use (Rx): Yes
• Over the Counter (OTC): No
• Kit: No
• Combination Product: No
• HCT/P: No
• Contains NRL: No
• Not Made with NRL: No
• MRI Safety: Labeling does not contain MRI Safety Information
• Direct Marking Exempt: No
• PM Exempt: No
• Has Serial Number: No
• Has Lot/Batch Number: Yes
• Has Manufacturing Date: No
• Has Expiration Date: Yes
• Has Donation ID: No

Sterilization

• Is Sterile: No
• Sterilization Prior Use: No

Product Codes

Code	Name	Medical Specialty	Regulation #	Device Class
LPP	Monitor, Oxygen, Cutaneous, For Uses Other Than For Infant Not Under Gas Anesthesia	Anesthesiology	868.2500	2
LKD	Monitor, Carbon-Dioxide, Cutaneous	Anesthesiology	868.2480	2
KLK	Monitor, Oxygen, Cutaneous, For Infant Not Under Gas Anesthesia	Anesthesiology	868.2500	2
DQA	Oximeter	Cardiovascular	870.2700	2
DPZ	Oximeter, Ear	Cardiovascular	870.2710	2

GMDN Terms

Code	Name	Definition	Implantable	Status
47582	Pulse Co-oximeter probe, reusable	A photoelectric component of a pulse Co-oximeter that is applied externally to a body part (e.g., a fingertip for adults, the hand or foot for neonates), for the transcutaneous multiwave measurement of carboxy-haemoglobin saturation (SpCO) and typically several other related parameters such as haemoglobin oxygen saturation (SpO2), methaemoglobin saturation (SpMet), haemoglobin concentration (SpHb), haematocrit, and pulse rate using light detection. Signals from the probe, produced by a light-emitting diode (LED) and a receiving detector, are used to calculate results which are digitally displayed on the Co-oximeter's computerized unit. This is a reusable device.	No	Active
37178	Transcutaneous blood gas monitor sensor	A device intended to be used with a transcutaneous blood gas monitor to measure a patient's blood partial pressure of oxygen (pO2), blood partial pressure of carbon dioxide (pCO2), and/or blood oxygen saturation transcutaneously (through the skin). Gases diffuse through the skin and into this sensor at the skin surface, where it transmits electrical signals to the parent device for analysis. This is a reusable device.	No	Active
46934	Transcutaneous blood gas monitoring system	An assembly of mains electricity (AC-powered) devices designed for the continuous and transcutaneous measurement of a patient's blood gas parameters, typically blood partial pressure of oxygen (pO2), blood partial pressure of carbon dioxide (pCO2), haemoglobin oxygen saturation (SpO2), and/or venous blood oxygenation through the jugular vein (SjvO2); often with pulse rate. It consists primarily of a probe for gas detection (e.g., via transcutaneous gas diffusion, or using light spectroscopy) placed on the patient’s skin, and an oximetry monitor for the measurement, analysis, and display of data; patient adhesives and connecting cables may be included.	No	Active

Identifiers

Type	ID	Issuing Agency	Package Type	Qty per Pkg	Pkg Status	Pkg Discontinue Date
Primary	07640121880858	GS1

Premarket Submissions

Submission Number	Supplement Number
K041548	000
K071672	000
K101690	000
K151329	000

Device Sizes

Type	Value	Unit	Text
Total Volume	2	Milliliter

Storage Conditions

• Type: Storage Environment Temperature
• Temperature Range: 10 – 30 Degrees Celsius