Multi-Site Attachment Ring for mature/intact skin

Basic Information

• Brand Name: Multi-Site Attachment Ring for mature/intact skin
• Primary DI: 07640121880797
• Version / Model: MARe-MI
• Company Name: SenTec AG
• Labeler DUNS: 480797856
• Distribution Status: In Commercial Distribution
• Device Count in Pkg: 1
• Record Status: Published
• Publish Date: 2019-01-29
• Public Version: 2
• Public Version Date: 2019-04-02
• Public Version Status: Update
• Public Device Record Key: 9e0f4315-9460-454f-acfe-0612db0778b8

Device Description

Single use sensor application ring, recommended for adult, pediatric and neonatal patients with mature/intact skin

Device Characteristics

• Single Use: Yes
• Prescription Use (Rx): Yes
• Over the Counter (OTC): No
• Kit: No
• Combination Product: No
• HCT/P: No
• Contains NRL: No
• Not Made with NRL: No
• MRI Safety: Labeling does not contain MRI Safety Information
• Direct Marking Exempt: Yes
• PM Exempt: No
• Has Serial Number: No
• Has Lot/Batch Number: Yes
• Has Manufacturing Date: No
• Has Expiration Date: Yes
• Has Donation ID: No

Sterilization

• Is Sterile: No
• Sterilization Prior Use: No

Product Codes

Code	Name	Medical Specialty	Regulation #	Device Class
LPP	Monitor, Oxygen, Cutaneous, For Uses Other Than For Infant Not Under Gas Anesthesia	Anesthesiology	868.2500	2
LKD	Monitor, Carbon-Dioxide, Cutaneous	Anesthesiology	868.2480	2
KLK	Monitor, Oxygen, Cutaneous, For Infant Not Under Gas Anesthesia	Anesthesiology	868.2500	2
DQA	Oximeter	Cardiovascular	870.2700	2
DPZ	Oximeter, Ear	Cardiovascular	870.2710	2

GMDN Terms

Code	Name	Definition	Implantable	Status
46934	Transcutaneous blood gas monitoring system	An assembly of mains electricity (AC-powered) devices designed for the continuous and transcutaneous measurement of a patient's blood gas parameters, typically blood partial pressure of oxygen (pO2), blood partial pressure of carbon dioxide (pCO2), haemoglobin oxygen saturation (SpO2), and/or venous blood oxygenation through the jugular vein (SjvO2); often with pulse rate. It consists primarily of a probe for gas detection (e.g., via transcutaneous gas diffusion, or using light spectroscopy) placed on the patient’s skin, and an oximetry monitor for the measurement, analysis, and display of data; patient adhesives and connecting cables may be included.	No	Active
37178	Transcutaneous blood gas monitor sensor	A device intended to be used with a transcutaneous blood gas monitor to measure a patient's blood partial pressure of oxygen (pO2), blood partial pressure of carbon dioxide (pCO2), and/or blood oxygen saturation transcutaneously (through the skin). Gases diffuse through the skin and into this sensor at the skin surface, where it transmits electrical signals to the parent device for analysis. This is a reusable device.	No	Active
47582	Pulse Co-oximeter probe, reusable	A photoelectric component of a pulse Co-oximeter that is applied externally to a body part (e.g., a fingertip for adults, the hand or foot for neonates), for the transcutaneous multiwave measurement of carboxy-haemoglobin saturation (SpCO) and typically several other related parameters such as haemoglobin oxygen saturation (SpO2), methaemoglobin saturation (SpMet), haemoglobin concentration (SpHb), haematocrit, and pulse rate using light detection. Signals from the probe, produced by a light-emitting diode (LED) and a receiving detector, are used to calculate results which are digitally displayed on the Co-oximeter's computerized unit. This is a reusable device.	No	Active

Identifiers

Type	ID	Issuing Agency	Package Type	Qty per Pkg	Pkg Status	Pkg Discontinue Date
Primary	07640121880797	GS1

Premarket Submissions

Submission Number	Supplement Number
K041548	000
K071672	000
K101690	000
K151329	000

Storage Conditions

• Type: Special Storage Condition, Specify
• Special Conditions: Temperature during transport: 0-50°C
• Type: Handling Environment Humidity
• Temperature Range: 25 – 60 Percent (%) Relative Humidity
• Type: Storage Environment Temperature
• Temperature Range: 10 – 30 Degrees Celsius