Standard Starter Set

Basic Information

• Brand Name: Standard Starter Set
• Primary DI: 07640121880094
• Version / Model: SSET
• Company Name: SenTec AG
• Labeler DUNS: 480797856
• Distribution Status: Not in Commercial Distribution
• Device Count in Pkg: 1
• Record Status: Published
• Publish Date: 2016-08-31
• Public Version: 3
• Public Version Date: 2023-10-04
• Public Version Status: Update
• Public Device Record Key: 3b5fda2e-fc20-4144-afe8-785578a81d32
• Distribution End Date: 2020-03-23

Device Description

Standard Starter Set contains: Ear Clips (EC-MI) Multi-Site Attachment Rings for mature/intact skin (MAR-MI) Multi-Site Attachment Rings for sensitive/fragile skin (MAR-SF) Membrane Changer tool (reloadable) (MC-R) Contact Gel (GEL-04) Service Gas (GAS-0812)

Device Characteristics

• Single Use: Yes
• Prescription Use (Rx): Yes
• Over the Counter (OTC): No
• Kit: Yes
• Combination Product: No
• HCT/P: No
• Contains NRL: No
• Not Made with NRL: No
• MRI Safety: Labeling does not contain MRI Safety Information
• Direct Marking Exempt: Yes
• PM Exempt: No
• Has Serial Number: No
• Has Lot/Batch Number: Yes
• Has Manufacturing Date: No
• Has Expiration Date: Yes
• Has Donation ID: No

Sterilization

• Is Sterile: No
• Sterilization Prior Use: No

Product Codes

Code	Name	Medical Specialty	Regulation #	Device Class
LPP	Monitor, Oxygen, Cutaneous, For Uses Other Than For Infant Not Under Gas Anesthesia	Anesthesiology	868.2500	2
KLK	Monitor, Oxygen, Cutaneous, For Infant Not Under Gas Anesthesia	Anesthesiology	868.2500	2
DQA	Oximeter	Cardiovascular	870.2700	2
DPZ	Oximeter, Ear	Cardiovascular	870.2710	2
LKD	Monitor, Carbon-Dioxide, Cutaneous	Anesthesiology	868.2480	2

GMDN Terms

Code	Name	Definition	Implantable	Status
47582	Pulse Co-oximeter probe, reusable	A photoelectric component of a pulse Co-oximeter that is applied externally to a body part (e.g., a fingertip for adults, the hand or foot for neonates), for the transcutaneous multiwave measurement of carboxy-haemoglobin saturation (SpCO) and typically several other related parameters such as haemoglobin oxygen saturation (SpO2), methaemoglobin saturation (SpMet), haemoglobin concentration (SpHb), haematocrit, and pulse rate using light detection. Signals from the probe, produced by a light-emitting diode (LED) and a receiving detector, are used to calculate results which are digitally displayed on the Co-oximeter's computerized unit. This is a reusable device.	No	Active
37178	Transcutaneous blood gas monitor sensor	A device intended to be used with a transcutaneous blood gas monitor to measure a patient's blood partial pressure of oxygen (pO2), blood partial pressure of carbon dioxide (pCO2), and/or blood oxygen saturation transcutaneously (through the skin). Gases diffuse through the skin and into this sensor at the skin surface, where it transmits electrical signals to the parent device for analysis. This is a reusable device.	No	Active
46934	Transcutaneous blood gas monitoring system	An assembly of mains electricity (AC-powered) devices designed for the continuous and transcutaneous measurement of a patient's blood gas parameters, typically blood partial pressure of oxygen (pO2), blood partial pressure of carbon dioxide (pCO2), haemoglobin oxygen saturation (SpO2), and/or venous blood oxygenation through the jugular vein (SjvO2); often with pulse rate. It consists primarily of a probe for gas detection (e.g., via transcutaneous gas diffusion, or using light spectroscopy) placed on the patient’s skin, and an oximetry monitor for the measurement, analysis, and display of data; patient adhesives and connecting cables may be included.	No	Active

Identifiers

Type	ID	Issuing Agency	Package Type	Qty per Pkg	Pkg Status	Pkg Discontinue Date
Primary	07640121880094	GS1

Storage Conditions

• Type: Special Storage Condition, Specify
• Special Conditions: during transport: 0-50°C
• Type: Storage Environment Humidity
• Temperature Range: 25 – 60 Percent (%) Relative Humidity
• Type: Storage Environment Temperature
• Temperature Range: 10 – 30 Degrees Celsius