FDA UDI
In Commercial Distribution
🇺🇸 United States
Pionext
DI: 06975471800012
·
Model: PN-Denture (Red)
·
Shenzhen Piocreat 3D Technology Co., Ltd
Product Codes
5
GMDN Terms
1
Identifiers
1
Pkg Device Count
1
Basic Information
- Brand Name
- Pionext
- Primary DI
- 06975471800012
- Version / Model
- PN-Denture (Red)
- Company Name
- Shenzhen Piocreat 3D Technology Co., Ltd
- Labeler DUNS
- 417463219
- Distribution Status
- In Commercial Distribution
- Device Count in Pkg
- 1
- Record Status
- Published
- Publish Date
- 2024-12-26
- Public Version
- 1
- Public Version Date
- 2025-01-03
- Public Version Status
- New
- Public Device Record Key
- 82dc0be0-8c41-4bd2-929e-4534bc1c6cf0
Device Description
Denture Base Resin
Device Characteristics
- Single Use
- No
- Prescription Use (Rx)
- Yes
- Over the Counter (OTC)
- No
- Kit
- No
- Combination Product
- No
- HCT/P
- No
- Contains NRL
- No
- Not Made with NRL
- No
- MRI Safety
- Labeling does not contain MRI Safety Information
- Direct Marking Exempt
- No
- PM Exempt
- No
- Has Serial Number
- No
- Has Lot/Batch Number
- Yes
- Has Manufacturing Date
- Yes
- Has Expiration Date
- No
- Has Donation ID
- No
Sterilization
- Is Sterile
- No
- Sterilization Prior Use
- No
Product Codes
| Code | Name | Medical Specialty | Regulation # | Device Class |
|---|---|---|---|---|
| ELM | Denture, Plastic, Teeth | Dental | 872.3590 | 2 |
| EBF | Material, Tooth Shade, Resin | Dental | 872.3690 | 2 |
| EBI | Resin, Denture, Relining, Repairing, Rebasing | Dental | 872.3760 | 2 |
| EBG | Crown And Bridge, Temporary, Resin | Dental | 872.3770 | 2 |
| PZY | Additively Manufactured, Preformed, Resin Denture Tooth | Dental | 872.3590 | 2 |
GMDN Terms
| Code | Name | Definition | Implantable | Status |
|---|---|---|---|---|
| 16730 | Dental appliance fabrication material, resin | A resin intended to be used in the dental laboratory to manufacture a patient-worn dental prosthesis or appliance (e.g., denture base, occlusal splint/night guard), that either: 1) polymerizes under heat (heat-cured), light (light-cured), and/or after a period of time (self-cured); or 2) can be shaped by a dental mill [e.g., based on computer-aided design/computer-aided manufacturing (CAD/CAM) technology]. It may in addition be intended to fabricate non-patient-worn devices (e.g., drilling templates using 3-D printing). After application, this material cannot be refabricated. | No | Active |
Identifiers
| Type | ID | Issuing Agency | Package Type | Qty per Pkg | Pkg Status | Pkg Discontinue Date |
|---|---|---|---|---|---|---|
| Primary | 06975471800012 | GS1 |
Premarket Submissions
| Submission Number | Supplement Number |
|---|---|
| K241673 | 000 |