Denture,restoration,orthodontic,anti-snoring,orthodontic

Basic Information

• Brand Name: Denture,restoration,orthodontic,anti-snoring,orthodontic
• Primary DI: 06972677879989
• Version / Model: 998
• Company Name: Modern Dental Laboratory (DG) Co., Ltd.
• Labeler DUNS: 551746187
• Distribution Status: In Commercial Distribution
• Device Count in Pkg: 11
• Record Status: Published
• Publish Date: 2020-07-30
• Public Version: 5
• Public Version Date: 2023-08-09
• Public Version Status: Update
• Public Device Record Key: fc36b3da-d932-4b45-9a2e-03da5730e912

Device Characteristics

• Single Use: Yes
• Prescription Use (Rx): Yes
• Over the Counter (OTC): No
• Kit: No
• Combination Product: No
• HCT/P: No
• Contains NRL: No
• Not Made with NRL: No
• MRI Safety: Labeling does not contain MRI Safety Information
• Direct Marking Exempt: Yes
• PM Exempt: No
• Has Serial Number: No
• Has Lot/Batch Number: Yes
• Has Manufacturing Date: No
• Has Expiration Date: No
• Has Donation ID: No

Sterilization

• Is Sterile: No
• Sterilization Prior Use: Yes
• Sterilization Methods: Moist Heat or Steam Sterilization

Product Codes

Code	Name	Medical Specialty	Regulation #	Device Class
LRK	Device, Anti-Snoring	Dental	872.5570	2
NSN	Restoration, Resin, Crown And Bridge	Unknown		N
NSK	Dentures, Partial	Unknown		N
NSL	Dentures, Full	Unknown		N
NSP	Restoration, Porcelain	Unknown		N
NSO	Restoration, Porcelain-Fused-To-Metal	Unknown		N
NSJ	Restoration, Noble Metal	Unknown		N
NSQ	Restoration, Base Metal	Unknown		N
NSR	Prosthesis, Orthodontic	Unknown		N
NDP	Accessories, Implant, Dental, Endosseous	Dental	872.3980	1
DZC	Wire, Orthodontic	Dental	872.5410	1

GMDN Terms

Code	Name	Definition	Implantable	Status
47526	Mandible-repositioning sleep-disordered breathing orthosis	A removable intraoral device designed to alleviate sleep-disordered breathing conditions (e.g., snoring, obstructive sleep apnoea) by repositioning and/or controlling the lower jaw (mandible), typically in a downward and forward position. It works by locking the mandible (e.g., holding the teeth) and preventing it from retruding, thus increasing the patency of the airway and decreasing both air turbulence and airway obstruction. A number of different fixed (non-adjustable) and adjustable types using several techniques and materials are available. This is a reusable device.	No	Active
38596	Custom-made dental crown, metal/polymer	A device made of metal, veneered with a polymer-based, tooth-coloured material, and created for a specific post-pubescent/adult patient (custom-made), that functions as an artificial covering to replace the major part, or the whole part, of the clinical crown of a tooth.	No	Active
38595	Custom-made dental crown, polymer	A device made entirely of polymer-based material with or without fibre reinforcement, and created for a specific post-pubescent/adult patient (custom-made), that functions as an artificial covering to replace the major part, or the whole part, of the clinical crown of a tooth.	No	Active
37543	Dental bridge, metal-polymer	A custom-made, non-removable, artificial replacement for one or more missing teeth made of metal alloy with a tooth-coloured polymer material (veneer), and comprised of an artifical tooth/teeth and crowns. It is fixed to abutment/adjacent teeth, tooth roots, or dental implants. Also referred to as a fixed partial prosthesis or a fixed partial denture.	No	Active
37542	Dental bridge, polymer	A custom-made, non-removable, artificial replacement for one or more missing teeth made entirely of polymer-based material, with or without fibre reinforcement, and comprised of an artifical tooth/teeth and crowns. It is fixed to abutment/adjacent teeth, tooth roots, or dental implants. Also referred to as a fixed partial prosthesis or a fixed partial denture.	No	Active
38645	Dental veneer, professional	A custom-made dental restoration made of ceramic or polymer-based material (resin) intended to be used in aesthetic dentistry to correct the facial surface of a tooth; it is intended to be applied to the teeth by a dental professional for long-term use, typically via an adhesive. This is a single-use device.	No	Active
38649	Resin dental inlay	A custom-made dental restoration made of resin-based material that is bonded within the center of a tooth (intracoronal) typically to serve as a well-fitting, long-lasting alternative to dental fillings for tooth decay or similar damage. It is fabricated indirectly in a dental lab, sometimes by computer-aided design/computer-aided manufacturing (CAD/CAM) techniques, before being fitted and bonded to the damaged tooth. This is a single-use device.	No	Active
38647	Ceramic dental inlay	A custom-made dental restoration made of ceramic material that is bonded within the center of a tooth (intracoronal) typically to serve as a well-fitting, long-lasting alternative to dental fillings for tooth decay or similar damage. It is fabricated indirectly in a dental lab, sometimes by computer-aided design/computer-aided manufacturing (CAD/CAM) techniques, before being fitted and bonded to the damaged tooth. This is a single-use device.	No	Active
38593	Custom-made dental crown, metal/ceramic	A device made of a combination of metal and tooth-coloured ceramic, and created for a specific post-pubescent/adult patient (custom-made), that functions as an artificial covering to replace the major part, or the whole part, of the clinical crown of a tooth.	No	Active
38648	Gold dental inlay	A custom-made dental restoration made of gold-based alloy that is bonded within the center of a tooth (intracoronal) typically to serve as a well-fitting, long-lasting alternative to dental fillings for tooth decay or similar damage. It is fabricated indirectly in a dental lab, sometimes by computer-aided design/computer-aided manufacturing (CAD/CAM) techniques, before being fitted and bonded to the damaged tooth. This is a single-use device.	No	Active
38615	Dental bridge, ceramic	A custom-made, non-removable, artificial replacement for one or more missing teeth made entirely of ceramic/porcelain material and comprised of an artifical tooth/teeth and crowns. It is fixed to abutment/adjacent teeth, tooth roots, or dental implants. Also referred to as a fixed partial prosthesis or a fixed partial denture.	No	Active
17845	Partial denture	A custom-made, removeable, artificial replacement for one or more, but not all, teeth in the lower or upper jaw (mandible or maxilla) in a partially edentulous patient. It typically includes clasps of metal or plastic that clip onto remaining teeth for retention and stabilization. It can be made of a variety of materials including polymers [polymethylmethacrylate (PMMA), polycarbonate (PC)], acrylic, ceramics, and/or metals [e.g., base metal alloys or titanium (Ti)]. Also known as a removable partial denture (RPD).	No	Active
38589	Complete lower denture	A custom-made artificial replacement for all teeth in the lower jaw (mandible) carried on a removable plate or frame which is supported by surrounding soft and hard tissues of the oral cavity. It can be made of a variety of materials including polymers [polymethylmethacrylate (PMMA), polycarbonate (PC)], acrylic, ceramics, and/or metals [e.g., base metal alloys or titanium (Ti)].	No	Active
38588	Complete upper denture	A custom-made artificial replacement for all teeth in the upper jaw (maxilla) carried on a removable plate or frame which is supported by surrounding soft and hard tissues of the oral cavity. It can be made of a variety of materials including polymers [polymethylmethacrylate (PMMA), polycarbonate (PC)], acrylic, ceramics, and/or metals [e.g., base metal alloys or titanium (Ti)].	No	Active
38591	Custom-made dental crown, metal	A device made totally of metal alloy material, and created for a specific post-pubescent/adult patient (custom-made), that functions as an artificial covering to replace the major part, or the whole part, of the clinical crown of a tooth.	No	Active
38614	Dental bridge, metal-ceramic	A custom-made, non-removable, artificial replacement for one or more missing teeth made of metal alloy combined with tooth-coloured ceramic material (veneer), and comprised of an artifical tooth/teeth and crowns. It is fixed to abutment/adjacent teeth, tooth roots, or dental implants. Also referred to as a fixed partial prosthesis or a fixed partial denture.	No	Active
35858	Dental casting noble alloy	A material composed primarily of noble metals [e.g., gold (Au), palladium (Pd), platinum (Pt), or silver (Ag)] intended for use in the fabrication of a dental cast [i.e., a positive copy of a part of the oral anatomy made in an impression (mould), such as a dental crown] or dental restorations and appliances (e.g., porcelain-fused-to-metal crowns and bridge restorations). It is typically available in the form of small ingots or bars that are melted and poured into an impression. After application, this device cannot be reused.	No	Active
38594	Custom-made dental crown, ceramic	A device made totally of ceramic material, and created for a specific post-pubescent/adult patient (custom-made), that functions as an artificial covering to replace the major part, or the whole part, of the clinical crown of a tooth.	No	Active
36311	Dental occlusal splint, preformed, reusable	A rigid or flexible prefabricated device intended to overlay the occlusal surfaces of the teeth to maintain the position of displaced or moveable teeth, to treat clenching and bruxism and their sequelae, and to provide temporary relief from muscle or temporo-mandibular joint (TMJ) pain (e.g., from TMJ dysfunction). It is typically made of standard, preformed materials that are not moulded, or intended to be moulded to a specific patient. This is a reusable device.	No	Active
35857	Dental casting non-noble alloy	A material composed primarily of non-noble metals [e.g., includes alloys such as cobalt-chrome (Co-Cr), nickel-chromium, titanium (Ti)] intended for use in the fabrication of a dental cast [i.e., a positive copy of a part of the oral anatomy made in an impression (mould), such as a dental crown] or dental restorations and appliances (e.g., porcelain-fused-to-metal crowns and bridge restorations). It is typically available in the form of small ingots or bars that are melted and poured into an impression. After application, this device cannot be reused.	No	Active
60826	Custom-made orthopaedic/craniofacial surgical guide	A custom-made surgical instrument intended to be used in an orthopaedic and/or craniomaxillofacial procedure (e.g., osteotomy, arthroplasty, tumour resection, distraction osteogenesis, cranial vault reconstruction) to assist in the intraoperative orientation of implant components, outlining the desired cut-line, and/or guiding of surgical instruments (e.g., surgical drill, oscillating cutting saw). It is made of synthetic polymer materials and is typically manufactured by 3-D printing and CAD/CAM techniques to match the patient-specific contours of the target anatomical site. This is a single-use device.	No	Active
35310	Orthodontic retainer	An orthodontic appliance, bonded or removable, intended to be used on a single patient to maintain teeth in corrected positions during the period of functional adaptation following corrective treatment. This appliance, also referred to as a positioner, is also used to maintain the positions of the teeth and jaws gained by orthodontic procedures.	No	Active
31754	Orthodontic space maintainer	A dental prosthetic replacement for prematurely lost deciduous teeth intended to prevent closure of the space before eruption of the permanent successors. It is often an urgent necessity in the buccal segment to prevent impaction of the permanent teeth and other complications.	No	Active

Identifiers

Type	ID	Issuing Agency	Package Type	Qty per Pkg	Pkg Status	Pkg Discontinue Date
Unit of Use	06972677879996	GS1
Primary	06972677879989	GS1