Denture, restoration, splint

Basic Information

• Brand Name: Denture, restoration, splint
• Primary DI: 06972677874120
• Version / Model: 412
• Company Name: Modern Dental Laboratory (DG) Co., Ltd.
• Labeler DUNS: 551746187
• Distribution Status: In Commercial Distribution
• Device Count in Pkg: 4
• Record Status: Published
• Publish Date: 2020-07-22
• Public Version: 4
• Public Version Date: 2023-08-03
• Public Version Status: Update
• Public Device Record Key: 8b50873d-7d19-4965-b3ca-1c23c359a83b

Device Characteristics

• Single Use: Yes
• Prescription Use (Rx): Yes
• Over the Counter (OTC): No
• Kit: No
• Combination Product: No
• HCT/P: No
• Contains NRL: No
• Not Made with NRL: No
• MRI Safety: Labeling does not contain MRI Safety Information
• Direct Marking Exempt: Yes
• PM Exempt: Yes
• Has Serial Number: No
• Has Lot/Batch Number: Yes
• Has Manufacturing Date: No
• Has Expiration Date: No
• Has Donation ID: No

Sterilization

• Is Sterile: No
• Sterilization Prior Use: Yes
• Sterilization Methods: Moist Heat or Steam Sterilization

Product Codes

Code	Name	Medical Specialty	Regulation #	Device Class
NSL	Dentures, Full	Unknown		N
NSN	Restoration, Resin, Crown And Bridge	Unknown		N
NSP	Restoration, Porcelain	Unknown		N
NSR	Prosthesis, Orthodontic	Unknown		N

GMDN Terms

Code	Name	Definition	Implantable	Status
37543	Dental bridge, metal-polymer	A custom-made, non-removable, artificial replacement for one or more missing teeth made of metal alloy with a tooth-coloured polymer material (veneer), and comprised of an artifical tooth/teeth and crowns. It is fixed to abutment/adjacent teeth, tooth roots, or dental implants. Also referred to as a fixed partial prosthesis or a fixed partial denture.	No	Active
38588	Complete upper denture	A custom-made artificial replacement for all teeth in the upper jaw (maxilla) carried on a removable plate or frame which is supported by surrounding soft and hard tissues of the oral cavity. It can be made of a variety of materials including polymers [polymethylmethacrylate (PMMA), polycarbonate (PC)], acrylic, ceramics, and/or metals [e.g., base metal alloys or titanium (Ti)].	No	Active
38589	Complete lower denture	A custom-made artificial replacement for all teeth in the lower jaw (mandible) carried on a removable plate or frame which is supported by surrounding soft and hard tissues of the oral cavity. It can be made of a variety of materials including polymers [polymethylmethacrylate (PMMA), polycarbonate (PC)], acrylic, ceramics, and/or metals [e.g., base metal alloys or titanium (Ti)].	No	Active
38596	Custom-made dental crown, metal/polymer	A device made of metal, veneered with a polymer-based, tooth-coloured material, and created for a specific post-pubescent/adult patient (custom-made), that functions as an artificial covering to replace the major part, or the whole part, of the clinical crown of a tooth.	No	Active
38595	Custom-made dental crown, polymer	A device made entirely of polymer-based material with or without fibre reinforcement, and created for a specific post-pubescent/adult patient (custom-made), that functions as an artificial covering to replace the major part, or the whole part, of the clinical crown of a tooth.	No	Active
36311	Dental occlusal splint, preformed, reusable	A rigid or flexible prefabricated device intended to overlay the occlusal surfaces of the teeth to maintain the position of displaced or moveable teeth, to treat clenching and bruxism and their sequelae, and to provide temporary relief from muscle or temporo-mandibular joint (TMJ) pain (e.g., from TMJ dysfunction). It is typically made of standard, preformed materials that are not moulded, or intended to be moulded to a specific patient. This is a reusable device.	No	Active
37542	Dental bridge, polymer	A custom-made, non-removable, artificial replacement for one or more missing teeth made entirely of polymer-based material, with or without fibre reinforcement, and comprised of an artifical tooth/teeth and crowns. It is fixed to abutment/adjacent teeth, tooth roots, or dental implants. Also referred to as a fixed partial prosthesis or a fixed partial denture.	No	Active
38645	Dental veneer, professional	A custom-made dental restoration made of ceramic or polymer-based material (resin) intended to be used in aesthetic dentistry to correct the facial surface of a tooth; it is intended to be applied to the teeth by a dental professional for long-term use, typically via an adhesive. This is a single-use device.	No	Active
35310	Orthodontic retainer	An orthodontic appliance, bonded or removable, intended to be used on a single patient to maintain teeth in corrected positions during the period of functional adaptation following corrective treatment. This appliance, also referred to as a positioner, is also used to maintain the positions of the teeth and jaws gained by orthodontic procedures.	No	Active
38649	Resin dental inlay	A custom-made dental restoration made of resin-based material that is bonded within the center of a tooth (intracoronal) typically to serve as a well-fitting, long-lasting alternative to dental fillings for tooth decay or similar damage. It is fabricated indirectly in a dental lab, sometimes by computer-aided design/computer-aided manufacturing (CAD/CAM) techniques, before being fitted and bonded to the damaged tooth. This is a single-use device.	No	Active
38594	Custom-made dental crown, ceramic	A device made totally of ceramic material, and created for a specific post-pubescent/adult patient (custom-made), that functions as an artificial covering to replace the major part, or the whole part, of the clinical crown of a tooth.	No	Active
38615	Dental bridge, ceramic	A custom-made, non-removable, artificial replacement for one or more missing teeth made entirely of ceramic/porcelain material and comprised of an artifical tooth/teeth and crowns. It is fixed to abutment/adjacent teeth, tooth roots, or dental implants. Also referred to as a fixed partial prosthesis or a fixed partial denture.	No	Active
38647	Ceramic dental inlay	A custom-made dental restoration made of ceramic material that is bonded within the center of a tooth (intracoronal) typically to serve as a well-fitting, long-lasting alternative to dental fillings for tooth decay or similar damage. It is fabricated indirectly in a dental lab, sometimes by computer-aided design/computer-aided manufacturing (CAD/CAM) techniques, before being fitted and bonded to the damaged tooth. This is a single-use device.	No	Active

Identifiers

Type	ID	Issuing Agency	Package Type	Qty per Pkg	Pkg Status	Pkg Discontinue Date
Unit of Use	06972677874137	GS1
Primary	06972677874120	GS1