Denture, splint

Basic Information

• Brand Name: Denture, splint
• Primary DI: 06972677873161
• Version / Model: 316
• Company Name: Modern Dental Laboratory (DG) Co., Ltd.
• Labeler DUNS: 551746187
• Distribution Status: In Commercial Distribution
• Device Count in Pkg: 3
• Record Status: Published
• Publish Date: 2020-07-24
• Public Version: 4
• Public Version Date: 2024-10-21
• Public Version Status: Update
• Public Device Record Key: 74f896f4-e256-49d1-9635-20f97517cfc5

Device Characteristics

• Single Use: Yes
• Prescription Use (Rx): Yes
• Over the Counter (OTC): No
• Kit: No
• Combination Product: No
• HCT/P: No
• Contains NRL: No
• Not Made with NRL: No
• MRI Safety: Labeling does not contain MRI Safety Information
• Direct Marking Exempt: Yes
• PM Exempt: Yes
• Has Serial Number: No
• Has Lot/Batch Number: Yes
• Has Manufacturing Date: No
• Has Expiration Date: No
• Has Donation ID: No

Sterilization

• Is Sterile: No
• Sterilization Prior Use: Yes
• Sterilization Methods: Moist Heat or Steam Sterilization

Product Codes

Code	Name	Medical Specialty	Regulation #	Device Class
NSK	Dentures, Partial	Unknown		N
NSL	Dentures, Full	Unknown		N
NSR	Prosthesis, Orthodontic	Unknown		N

GMDN Terms

Code	Name	Definition	Implantable	Status
17845	Partial denture	A custom-made, removeable, artificial replacement for one or more, but not all, teeth in the lower or upper jaw (mandible or maxilla) in a partially edentulous patient. It typically includes clasps of metal or plastic that clip onto remaining teeth for retention and stabilization. It can be made of a variety of materials including polymers [polymethylmethacrylate (PMMA), polycarbonate (PC)], acrylic, ceramics, and/or metals [e.g., base metal alloys or titanium (Ti)]. Also known as a removable partial denture (RPD).	No	Active
35310	Orthodontic retainer	An orthodontic appliance, bonded or removable, intended to be used on a single patient to maintain teeth in corrected positions during the period of functional adaptation following corrective treatment. This appliance, also referred to as a positioner, is also used to maintain the positions of the teeth and jaws gained by orthodontic procedures.	No	Active
36311	Removable dental occlusal splint, preformed	A rigid or flexible prefabricated device intended to overlay the occlusal surfaces of the teeth to maintain the position of displaced or moveable teeth, to treat clenching and bruxism and their sequelae, and to provide temporary relief from muscle or temporo-mandibular joint (TMJ) pain (e.g., from TMJ dysfunction). It is removable by the patient (e.g., during meals), and is typically made of standard, preformed materials that are not moulded, or intended to be moulded to a specific patient. This is a reusable device.	No	Active
38588	Complete upper denture	A custom-made artificial replacement for all teeth in the upper jaw (maxilla) carried on a removable plate or frame which is supported by surrounding soft and hard tissues of the oral cavity. It can be made of a variety of materials including polymers [polymethylmethacrylate (PMMA), polycarbonate (PC)], acrylic, ceramics, and/or metals [e.g., base metal alloys or titanium (Ti)].	No	Active
38589	Complete lower denture	A custom-made artificial replacement for all teeth in the lower jaw (mandible) carried on a removable plate or frame which is supported by surrounding soft and hard tissues of the oral cavity. It can be made of a variety of materials including polymers [polymethylmethacrylate (PMMA), polycarbonate (PC)], acrylic, ceramics, and/or metals [e.g., base metal alloys or titanium (Ti)].	No	Active

Identifiers

Type	ID	Issuing Agency	Package Type	Qty per Pkg	Pkg Status	Pkg Discontinue Date
Unit of Use	06972677873178	GS1
Primary	06972677873161	GS1