CORiTEC preMill

Basic Information

• Brand Name: CORiTEC preMill
• Primary DI: 05712821011978
• Version / Model: CPMB-ZSV45-1
• Catalog Number: CPMB-ZSV45-1
• Company Name: Elos Medtech Pinol A/S
• Labeler DUNS: 306155953
• Distribution Status: In Commercial Distribution
• Device Count in Pkg: 1
• Record Status: Published
• Publish Date: 2024-02-08
• Public Version: 1
• Public Version Date: 2024-02-16
• Public Version Status: New
• Public Device Record Key: 6bf83ad8-ce0e-4e2f-a4fa-b1e54fd39599

Device Description

The Pre-Milled Blank is used in creation of a customized abutment. It has a pre-manufactured connection interface that fits directly to an endosseous dental implant. The customized shape of the abutment shall be manufactured by either an Elos Medtech approved milling facility or at point of use. The Pre-Milled abutment is delivered non-sterile and the final restoration and corresponding screw is intended to be sterilized at the dental clinic before it is placed in the patient.

Device Characteristics

• Single Use: Yes
• Prescription Use (Rx): Yes
• Over the Counter (OTC): No
• Kit: No
• Combination Product: No
• HCT/P: No
• Contains NRL: No
• Not Made with NRL: No
• MRI Safety: MR Conditional
• Direct Marking Exempt: No
• PM Exempt: No
• Has Serial Number: No
• Has Lot/Batch Number: Yes
• Has Manufacturing Date: Yes
• Has Expiration Date: No
• Has Donation ID: No

Sterilization

• Is Sterile: No
• Sterilization Prior Use: Yes
• Sterilization Methods: Moist Heat or Steam Sterilization

Product Codes

Code	Name	Medical Specialty	Regulation #	Device Class
NHA	Abutment, Implant, Dental, Endosseous	Dental	872.3630	2

GMDN Terms

Code	Name	Definition	Implantable	Status
44879	Dental implant suprastructure, permanent, preformed	A prefabricated device intended to provide a permanent intermediate fixture level between a dental implant and the final prosthesis/restoration (e.g., bridge, single tooth, overdenture). It includes one or more structural component(s) [e.g., abutment, ball, bar, bar overlay, coping, ring], and may be made of various materials [e.g., titanium (Ti), plastic, gold alloy]. It includes devices glued to prostheses and/or devices that can be replaced during cleaning cycles. An abutment screw(s) may be included, however the suprastructure does not represent the screw(s) in isolation. It may also be referred to as an abutment assembly or mesostructure.	Yes	Active

Identifiers

Type	ID	Issuing Agency	Package Type	Qty per Pkg	Pkg Status	Pkg Discontinue Date
Primary	05712821011978	GS1

Premarket Submissions

Submission Number	Supplement Number
K231307	000