FDA UDI
In Commercial Distribution
🇺🇸 United States
AquaCast Mask
DI: 04719879740172
·
Model: PUS-24
·
BLESSING CATHAY CORPORATION
Product Codes
1
GMDN Terms
1
Identifiers
1
Pkg Device Count
1
Basic Information
- Brand Name
- AquaCast Mask
- Primary DI
- 04719879740172
- Version / Model
- PUS-24
- Company Name
- BLESSING CATHAY CORPORATION
- Labeler DUNS
- 658023267
- Distribution Status
- In Commercial Distribution
- Device Count in Pkg
- 1
- Record Status
- Published
- Publish Date
- 2025-09-18
- Public Version
- 1
- Public Version Date
- 2025-09-26
- Public Version Status
- New
- Public Device Record Key
- f8b87906-bfcd-4a04-8db7-9de1f2763cd4
Device Description
AquaCast Mask is a device used for the positioning and immobilization of patient’s head undergoing or receiving a course of external beam radiation therapy for the treatment of cancer. Our AquaCast Masks are available in thicknesses of 2.4 mm and 3.2 mm. The thermoplastics extending 5cm and 7cm beyond the bottom of the plastic frames for U-frame, S-frame, V-frame masks are also available for land-marking.
Device Characteristics
- Single Use
- No
- Prescription Use (Rx)
- Yes
- Over the Counter (OTC)
- No
- Kit
- No
- Combination Product
- No
- HCT/P
- No
- Contains NRL
- No
- Not Made with NRL
- No
- MRI Safety
- Labeling does not contain MRI Safety Information
- Direct Marking Exempt
- No
- PM Exempt
- No
- Has Serial Number
- No
- Has Lot/Batch Number
- Yes
- Has Manufacturing Date
- Yes
- Has Expiration Date
- No
- Has Donation ID
- No
Sterilization
- Is Sterile
- No
- Sterilization Prior Use
- No
Product Codes
| Code | Name | Medical Specialty | Regulation # | Device Class |
|---|---|---|---|---|
| IYE | Accelerator, Linear, Medical | Radiology | 892.5050 | 2 |
GMDN Terms
| Code | Name | Definition | Implantable | Status |
|---|---|---|---|---|
| 40896 | Patient positioning thermoplastic mould material | A thermoplastic material used to create moulds of a patient's body. It is commonly supplied as sheets or meshes of thermoplastic material that have been coated with polyurethane for ease of handling and positioning. Most of these materials are softened by heating in hot water and while softened, are moulded around the patient's anatomy. When cooled, it hardens to form a custom-made mould or cast of that part of the body. After the moulding process is complete, it is typically attached to a board, frame, or another patient positioning system (PPS) or immobilization device. After application, this device cannot be reused (i.e., remoulded). | No | Active |
Identifiers
| Type | ID | Issuing Agency | Package Type | Qty per Pkg | Pkg Status | Pkg Discontinue Date |
|---|---|---|---|---|---|---|
| Primary | 04719879740172 | GS1 |
Premarket Submissions
| Submission Number | Supplement Number |
|---|---|
| K252174 | 000 |