Flexcera™ Smile Ultra+ B1

Basic Information

• Brand Name: Flexcera™ Smile Ultra+ B1
• Primary DI: 04260683220447
• Version / Model: RES-01-3150
• Catalog Number: RES-01-3150
• Company Name: Envisiontec GmbH
• Labeler DUNS: 332025159
• Distribution Status: In Commercial Distribution
• Device Count in Pkg: 1
• Record Status: Published
• Publish Date: 2022-01-21
• Public Version: 1
• Public Version Date: 2022-01-31
• Public Version Status: New
• Public Device Record Key: f6e22239-80d8-4be5-8191-1aa94814ac05

Device Description

Flexcera™ Smile Ultra+ is a light-curing material for the additive manufacturing of permanent single and partial crowns, of artificial teeth, of veneers and of monolithic full and partial dentures and temporary crowns and bridges.

Device Characteristics

• Single Use: No
• Prescription Use (Rx): Yes
• Over the Counter (OTC): No
• Kit: No
• Combination Product: No
• HCT/P: No
• Contains NRL: No
• Not Made with NRL: No
• MRI Safety: Labeling does not contain MRI Safety Information
• Direct Marking Exempt: No
• PM Exempt: Yes
• Has Serial Number: No
• Has Lot/Batch Number: Yes
• Has Manufacturing Date: Yes
• Has Expiration Date: Yes
• Has Donation ID: No

Sterilization

• Is Sterile: No
• Sterilization Prior Use: No

Product Codes

Code	Name	Medical Specialty	Regulation #	Device Class
EBG	Crown And Bridge, Temporary, Resin	Dental	872.3770	2
PZY	Additively Manufactured, Preformed, Resin Denture Tooth	Dental	872.3590	2
ELM	Denture, Plastic, Teeth	Dental	872.3590	2
EBI	Resin, Denture, Relining, Repairing, Rebasing	Dental	872.3760	2
EBF	Material, Tooth Shade, Resin	Dental	872.3690	2

GMDN Terms

Code	Name	Definition	Implantable	Status
45236	Temporary dental crown/bridge resin	A material [e.g., polymethylmethacrylate (PMMA)] intended to make a temporary crown or bridge prosthesis for use until a permanent restoration is fabricated.	No	Active
38595	Custom-made dental crown, polymer	A device made entirely of polymer-based material with or without fibre reinforcement, and created for a specific post-pubescent/adult patient (custom-made), that functions as an artificial covering to replace the major part, or the whole part, of the clinical crown of a tooth.	No	Active
17845	Partial denture	A custom-made, removeable, artificial replacement for one or more, but not all, teeth in the lower or upper jaw (mandible or maxilla) in a partially edentulous patient. It typically includes clasps of metal or plastic that clip onto remaining teeth for retention and stabilization. It can be made of a variety of materials including polymers [polymethylmethacrylate (PMMA), polycarbonate (PC)], acrylic, ceramics, and/or metals [e.g., base metal alloys or titanium (Ti)]. Also known as a removable partial denture (RPD).	No	Active
55831	Denture base resin kit	A collection of resins and other devices and/or materials intended to be used in the dental laboratory to manufacture a complete or partial denture base (the portion of a denture that rests on the oral mucosa and retains the artificial teeth). It usually includes the resin monomer (e.g., acrylic monomer of methyl methacrylate), a catalyst intended for polymerization, and additional products such as pigments, plasticizers, and/or devices (e.g., flasks, clamps). This is a single-use device.	No	Active
38589	Complete lower denture	A custom-made artificial replacement for all teeth in the lower jaw (mandible) carried on a removable plate or frame which is supported by surrounding soft and hard tissues of the oral cavity. It can be made of a variety of materials including polymers [polymethylmethacrylate (PMMA), polycarbonate (PC)], acrylic, ceramics, and/or metals [e.g., base metal alloys or titanium (Ti)].	No	Active
38588	Complete upper denture	A custom-made artificial replacement for all teeth in the upper jaw (maxilla) carried on a removable plate or frame which is supported by surrounding soft and hard tissues of the oral cavity. It can be made of a variety of materials including polymers [polymethylmethacrylate (PMMA), polycarbonate (PC)], acrylic, ceramics, and/or metals [e.g., base metal alloys or titanium (Ti)].	No	Active
38643	Resin artificial teeth	Prefabricated teeth made of polymer-based material for mounting on dentures. Teeth are normally delivered as sets of front teeth, upper or lower jaw, or sets of premolars and molars, upper or lower jaw, in various sizes, shapes and colours.	No	Active

Identifiers

Type	ID	Issuing Agency	Package Type	Qty per Pkg	Pkg Status	Pkg Discontinue Date
Primary	04260683220447	GS1

Customer Contacts

• Phone: [phone]
• Email: [email protected]

Storage Conditions

• Type: Handling Environment Temperature
• Temperature Range: 41 – 86 Degrees Fahrenheit
• Type: Special Storage Condition, Specify
• Special Conditions: Protect from sunlight