Oxylog 3000/3000p NIVPack

Basic Information

• Brand Name: Oxylog 3000/3000p NIVPack
• Primary DI: 04048675421061
• Version / Model: MP01669
• Company Name: Drägerwerk AG & Co. KGaA
• Labeler DUNS: 315578914
• Distribution Status: Not in Commercial Distribution
• Device Count in Pkg: 1
• Record Status: Published
• Publish Date: 2015-10-24
• Public Version: 6
• Public Version Date: 2023-07-25
• Public Version Status: Update
• Public Device Record Key: 6da058f7-b746-44b5-96aa-9ff582e12a18
• Distribution End Date: 2017-04-28

Device Characteristics

• Single Use: Yes
• Prescription Use (Rx): No
• Over the Counter (OTC): No
• Kit: No
• Combination Product: No
• HCT/P: No
• Contains NRL: No
• Not Made with NRL: No
• MRI Safety: MR Unsafe
• Direct Marking Exempt: No
• PM Exempt: Yes
• Has Serial Number: No
• Has Lot/Batch Number: Yes
• Has Manufacturing Date: Yes
• Has Expiration Date: Yes
• Has Donation ID: No

Sterilization

• Is Sterile: No
• Sterilization Prior Use: No

Product Codes

Code	Name	Medical Specialty	Regulation #	Device Class
CAI	Circuit, Breathing (W Connector, Adaptor, Y Piece)	Anesthesiology	868.5240	1

GMDN Terms

Code	Name	Definition	Implantable	Status
46232	Anaesthesia face mask, single-use	A flexible, form-shaped device designed to be placed over a patient's nose and/or mouth to direct anaesthetic gases to the upper airway. It is made of conductive or non-conductive rubber, polyvinyl chloride (PVC), or other sterilizable materials that produce a soft, flexible cover to create an airtight seal against the patient's face. It typically includes a 22 mm connector (adult) or a 15 mm connector (paediatric), and is available in a range of sizes. It may be stabilized with a headstrap. This device is sometimes used in association with a manual resuscitator. This is a single-use device.	No	Active
46816	Heat/moisture exchanger/microbial medical gas filter	A device intended to be placed within a breathing circuit proximal to the patient, to remove and retain microbes whilst capturing the patient's exhaled heat and moisture so that they can be used to heat and humidify the therapeutic gases inspired by the patient. It is typically a plastic housing which contains both a bidirectional microbial filter, intended to reduce the risk of cross-contamination between patients, and a heat/moisture exchanger (HME), intended to maintain the mucous membranes of the respiratory tract. It is typically used during anaesthesia or periods of prolonged respiratory support/therapy. This is a single-use device.	No	Active
36849	Breathing circuit gas-flow sensor, reusable	A device that includes a transducer intended to detect the movement of gases in a breathing circuit, and convert this into an electrical signal for relay to a ventilator (e.g., adult/paediatric/neonatal ventilators, anaesthesia system ventilators). It is connected to the breathing circuit and an appropriate data transfer cable and intended to enable the ventilator to display/monitor the gas flow to and from the patient, whereby controlled adjustments may be made. This is a reusable device.	No	Active
37706	Ventilator breathing circuit, single-use	An assembly of devices designed to conduct air or oxygen (O2) enriched gases and additional gases [e.g., nitrous oxide (N2O), halogenated gases] from a ventilator to a patient artificial airway/respiratory mask (not included). It includes breathing tubes, a Y-piece connector, and provides connections for devices that humidify, deliver medication, and monitor gas concentration or pressure within the breathing circuit; some types may include a carbon dioxide cuvette and/or an integrated heating wire powered by a connected humidifier intended to warm breathing gases as they enter the patient's airway. This is a single-use device.	No	Active
14337	PEEP valve, reusable	A non-sterile device used in a respiratory or anaesthesia breathing circuit or system to maintain a selected level of positive end expiratory pressure (PEEP) in a patient's airway during ventilation. The device is typically constructed of plastic and metal materials, and has a valve(s) actuated with a spring(s) to provide the airway resistance, and an adjustable knob or dial (usually graduated) to adjust the resistance level typically between 5 to 20 cmH2O. It is used with ventilators, stand-alone breathing systems for oxygen delivery, pulmonary resuscitators, or anaesthetic breathing systems often having an expiratory valve function. This is a reusable device.	No	Active

Identifiers

Type	ID	Issuing Agency	Package Type	Qty per Pkg	Pkg Status	Pkg Discontinue Date
Package	04048675252528	GS1		5	Not in Commercial Distribution	2017-04-28
Primary	04048675421061	GS1

Customer Contacts

• Phone: [phone]
• Email: [email protected]