Intramedullary Plugs

Basic Information

• Brand Name: Intramedullary Plugs
• Primary DI: 04026575230884
• Version / Model: 109-130/13
• Company Name: WALDEMAR LINK GmbH & Co. KG
• Labeler DUNS: 315675488
• Distribution Status: In Commercial Distribution
• Device Count in Pkg: 1
• Record Status: Published
• Publish Date: 2025-11-24
• Public Version: 1
• Public Version Date: 2025-12-02
• Public Version Status: New
• Public Device Record Key: 1bd47f24-8785-477b-9f75-64d8825ab1c1

Device Description

Intramedullary Plug, Ø13 mm

Device Characteristics

• Single Use: Yes
• Prescription Use (Rx): Yes
• Over the Counter (OTC): No
• Kit: No
• Combination Product: No
• HCT/P: No
• Contains NRL: No
• Not Made with NRL: No
• MRI Safety: Labeling does not contain MRI Safety Information
• Direct Marking Exempt: Yes
• PM Exempt: No
• Has Serial Number: No
• Has Lot/Batch Number: Yes
• Has Manufacturing Date: No
• Has Expiration Date: Yes
• Has Donation ID: No

Sterilization

• Is Sterile: Yes
• Sterilization Prior Use: No

Product Codes

Code	Name	Medical Specialty	Regulation #	Device Class
LZO	Prosthesis, Hip, Semi-Constrained, Metal/Ceramic/Polymer, Cemented Or Non-Porous, Uncemented	Orthopedic	888.3353	2
LPH	Prosthesis, Hip, Semi-Constrained, Metal/Polymer, Porous Uncemented	Orthopedic	888.3358	2
OQG	Hip Prosthesis, Semi-Constrained, Cemented, Metal/Polymer, + Additive, Porous, Uncemented	Orthopedic	888.3358	2
KWY	Prosthesis, Hip, Hemi-, Femoral, Metal/Polymer, Cemented Or Uncemented	Orthopedic	888.3390	2
MEH	Prosthesis, Hip, Semi-Constrained, Uncemented, Metal / Polymer, Non-Porous, Calcium Phosphate	Orthopedic	888.3353	2

GMDN Terms

Code	Name	Definition	Implantable	Status
38799	Polymer orthopaedic cement restrictor, non-bioabsorbable	A non-bioabsorbable, implantable device designed to be inserted into the medullary canal of a bone (e.g., femur, tibia, or humerus) during orthopaedic surgery to prevent cement progression in the diaphysis and therefore facilitate cement pressurization during the introduction of an implant. It is typically made of polyetheretherketone (PEEK) or ultrahigh molecular weight polyethylene (UHMWPE) and is available in a variety of designs (e.g., straight or tapered, hollow with a fenestrated surface), and it may have a toothed surface to prevent its migration from the desired location. It may incorporate a metal orientation marker for radiographs and it is not intended for spinal application.	Yes	Active

Identifiers

Type	ID	Issuing Agency	Package Type	Qty per Pkg	Pkg Status	Pkg Discontinue Date
Primary	04026575230884	GS1

Premarket Submissions

Submission Number	Supplement Number
K250375	000