Life Warmer Quantum Thermal Infusion Set (TIS)

Basic Information

• Brand Name: Life Warmer Quantum Thermal Infusion Set (TIS)
• Primary DI: 00868058000409
• Version / Model: 63-5903
• Catalog Number: 35-0004
• Company Name: NORTH AMERICAN RESCUE, LLC
• Labeler DUNS: 832426782
• Distribution Status: In Commercial Distribution
• Device Count in Pkg: 1
• Record Status: Published
• Publish Date: 2019-09-03
• Public Version: 4
• Public Version Date: 2024-04-26
• Public Version Status: Update
• Public Device Record Key: bb1aca92-5712-4f9f-a7a1-bffc399d5a34

Device Description

The LifeWarmer Quantum Thermal Infusion Set (TIS) is the revolutionary IV tubing set that allows for safe, rapid warming of IV fluids without adding hardly any additional steps to the normal IV setup process. Modeled after standard IV infusion tubing, the familiar configuration allows for ease of use. The sophisticated intelligence and proprietary warming technology are integrated into the tubing system for simplicity and to reduce additional equipment and procedural steps. Roughly the same size and weight as standard IV tubing, there is almost no additional equipment burden. The Quantum IV administration tubing is double-extruded to yield a configuration that has both an inner tubing layer and an outer tubing layer. A conductive heating element is between the two layers but does not come in contact with the fluid path or disrupt the laminar flow. The outer tubing layer acts as an insulator while the inner tubing layer transfers the heat from the heating element to the fluid path. Thermistors located in the tubing continually measure temperature and provide that input to the Quantum Controller. The monitoring and independent application of energy (heat) along the fluid path allows the Quantum to respond to varying temperature inputs from the fluid source to near the point of patient entry to ensure fluid temperature is the right temperature at delivery. The Quantum Life Warmer, fully charged, is able to warm and maintain up to approximately 1700 mL of 20C IV solution to a set point of 100.4F (38 +/- 2C) at a flow rate of 200 mL/min. Effective warming flow rates range from 2 to 200 mL/minute depending on input fluid temperature and ambient conditions.

Device Characteristics

• Single Use: Yes
• Prescription Use (Rx): Yes
• Over the Counter (OTC): No
• Kit: No
• Combination Product: No
• HCT/P: No
• Contains NRL: No
• Not Made with NRL: Yes
• MRI Safety: MR Unsafe
• Direct Marking Exempt: No
• PM Exempt: No
• Has Serial Number: No
• Has Lot/Batch Number: Yes
• Has Manufacturing Date: Yes
• Has Expiration Date: Yes
• Has Donation ID: No

Sterilization

• Is Sterile: Yes
• Sterilization Prior Use: Yes
• Sterilization Methods: Ethylene Oxide

Product Codes

Code	Name	Medical Specialty	Regulation #	Device Class
LGZ	Warmer, Thermal, Infusion Fluid	General Hospital	880.5725	2
BSB	Warmer, Blood, Non-Electromagnetic Radiation	Hematology	864.9205	2

GMDN Terms

Code	Name	Definition	Implantable	Status
47616	Conduction blood/fluid warmer	An electrically-powered device designed for in-line heating of banked blood, blood products, intravenous (IV) solutions, and irrigation fluids, typically from about 4ºC to near body temperature (i.e., 35 to 37ºC) before infusion, through the conduction of heat. The device usually includes a surface heat exchanger (e.g., heated dry plate) for the conduction of heat to the infusion blood/fluid via a disposable set (e.g., tubing or pouch); it also includes temperature controls and/or alarms. It is typically mounted on an IV pole under the infusion bag; it does not infuse blood/fluid.	No	Active

Identifiers

Type	ID	Issuing Agency	Package Type	Qty per Pkg	Pkg Status	Pkg Discontinue Date
Package	00868058000461	GS1	Box	2	In Commercial Distribution
Primary	00868058000409	GS1