Ceramic Crown A3 Single-unit Capsule

Basic Information

• Brand Name: Ceramic Crown A3 Single-unit Capsule
• Primary DI: 00850070544160
• Version / Model: SRI-0204048
• Company Name: Sprintray, Inc.
• Labeler DUNS: 063005260
• Distribution Status: In Commercial Distribution
• Device Count in Pkg: 1
• Record Status: Published
• Publish Date: 2025-02-12
• Public Version: 1
• Public Version Date: 2025-02-20
• Public Version Status: New
• Public Device Record Key: b35f7355-11a9-4caf-9683-13b3332629fb

Device Description

SprintRay Ceramic Crown is a light-curable polymerizable resin intended to be used for the fabrication of; individual and fixed definitive full single crowns; definitive partial crowns in anterior and posterior area, individual and fixed single veneers; artificial teeth for dental prostheses, which are used for removable definitive full dentures; and individual and removable monolithic full and partial dentures in dental offices and laboratories. The material is an alternative to traditional restorative dental material.

Device Characteristics

• Single Use: No
• Prescription Use (Rx): Yes
• Over the Counter (OTC): No
• Kit: No
• Combination Product: No
• HCT/P: No
• Contains NRL: No
• Not Made with NRL: No
• MRI Safety: Labeling does not contain MRI Safety Information
• Direct Marking Exempt: No
• PM Exempt: No
• Has Serial Number: No
• Has Lot/Batch Number: Yes
• Has Manufacturing Date: Yes
• Has Expiration Date: Yes
• Has Donation ID: No

Sterilization

• Is Sterile: No
• Sterilization Prior Use: No

Product Codes

Code	Name	Medical Specialty	Regulation #	Device Class
EBF	Material, Tooth Shade, Resin	Dental	872.3690	2
EBI	Resin, Denture, Relining, Repairing, Rebasing	Dental	872.3760	2
ELM	Denture, Plastic, Teeth	Dental	872.3590	2

GMDN Terms

Code	Name	Definition	Implantable	Status
16730	Dental appliance fabrication material, resin	A resin intended to be used in the dental laboratory to manufacture a patient-worn dental prosthesis or appliance (e.g., denture base, occlusal splint/night guard), that either: 1) polymerizes under heat (heat-cured), light (light-cured), and/or after a period of time (self-cured); or 2) can be shaped by a dental mill [e.g., based on computer-aided design/computer-aided manufacturing (CAD/CAM) technology]. It may in addition be intended to fabricate non-patient-worn devices (e.g., drilling templates using 3-D printing). After application, this material cannot be refabricated.	No	Active

Identifiers

Type	ID	Issuing Agency	Package Type	Qty per Pkg	Pkg Status	Pkg Discontinue Date
Primary	00850070544160	GS1

Customer Contacts

• Phone: [phone]
• Email: [email protected]

Premarket Submissions

Submission Number	Supplement Number
K222623	000

Device Sizes

Type	Value	Unit	Text
Total Volume	4	Milliliter