Ceramic Crown - A2 - Single-unit Capsule 3-Pack

Basic Information

• Brand Name: Ceramic Crown - A2 - Single-unit Capsule 3-Pack
• Primary DI: 00850039704888
• Version / Model: SRI-0204011
• Company Name: Sprintray, Inc.
• Labeler DUNS: 063005260
• Distribution Status: In Commercial Distribution
• Device Count in Pkg: 1
• Record Status: Published
• Publish Date: 2024-09-09
• Public Version: 1
• Public Version Date: 2024-09-17
• Public Version Status: New
• Public Device Record Key: d35848a7-16a0-4e5e-b282-7030416d937c

Device Description

SprintRay Ceramic Crown is a photo-polymer methacrylate resin material used in conjunction with a 3D printer and a scanned 3D image in a dental office to build dental prosthetics by 3D printing layer upon layer of the composite material.

Device Characteristics

• Single Use: No
• Prescription Use (Rx): Yes
• Over the Counter (OTC): No
• Kit: No
• Combination Product: No
• HCT/P: No
• Contains NRL: No
• Not Made with NRL: No
• MRI Safety: Labeling does not contain MRI Safety Information
• Direct Marking Exempt: No
• PM Exempt: No
• Has Serial Number: No
• Has Lot/Batch Number: Yes
• Has Manufacturing Date: Yes
• Has Expiration Date: Yes
• Has Donation ID: No

Sterilization

• Is Sterile: No
• Sterilization Prior Use: No

Product Codes

Code	Name	Medical Specialty	Regulation #	Device Class
EBF	Material, Tooth Shade, Resin	Dental	872.3690	2
EBI	Resin, Denture, Relining, Repairing, Rebasing	Dental	872.3760	2
ELM	Denture, Plastic, Teeth	Dental	872.3590	2

GMDN Terms

Code	Name	Definition	Implantable	Status
16730	Dental appliance fabrication material, resin	A resin intended to be used in the dental laboratory to manufacture a patient-worn dental prosthesis or appliance (e.g., denture base, occlusal splint/night guard), that either: 1) polymerizes under heat (heat-cured), light (light-cured), and/or after a period of time (self-cured); or 2) can be shaped by a dental mill [e.g., based on computer-aided design/computer-aided manufacturing (CAD/CAM) technology]. It may in addition be intended to fabricate non-patient-worn devices (e.g., drilling templates using 3-D printing). After application, this material cannot be refabricated.	No	Active

Identifiers

Type	ID	Issuing Agency	Package Type	Qty per Pkg	Pkg Status	Pkg Discontinue Date
Primary	00850039704888	GS1

Customer Contacts

• Phone: [phone]
• Email: [email protected]

Premarket Submissions

Submission Number	Supplement Number
K222623	000

Device Sizes

Type	Value	Unit	Text
Total Volume	12	Milliliter

Storage Conditions

• Type: Special Storage Condition, Specify
• Special Conditions: Do not use Ceramic Crown after the expiration date printed on the bottle
• Type: Special Storage Condition, Specify
• Special Conditions: Store Ceramic Crown at 15-25oC (60-77oF) and avoid direct sunlight
• Type: Special Storage Condition, Specify
• Special Conditions: Resin must be protected from exposure to light, as spontaneous polymerization is possible. The bottle must be tightly closed after every usage.
• Type: Special Storage Condition, Specify
• Special Conditions: Keep the bottle closed and/or the tank lid securely attached when not in use